Question about Weedeater 2 Speed Gas Blower FL1500LE ()

1 Answer

I need to repair the starter mechanizum on my weedeater fl1500 gas blower. How do you get at it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Oh, are you in for a job.
here we go,,,,pull air output tube. then remove bottom of air intake shroud...then remove impellar, then remove top half of air intake shorud... now all starting parts will be visable. They are mounted on top of the top half of the air intake shorud......careful, the fuel tank is mounted to the top half of the shroud...Good luck.

Posted on May 29, 2010

  • hlclark92 Sep 07, 2010

    Good information, but I'm not sure how to get the impellar nut loose? How do I brace the impellar or impellar shaft so I can break the nut loose?
    Thanks

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My weedeater 150 mph starts hard and barely runs at full throttle. I put in new gas, plug, and clean air filter. Please help. John


One cause of such a symptom could be an obstructed exhaust. Make sure the outlet of the muffler is not obstructed (ex. dirt dobber nest), also check the exhaust port by removing the muffler.

Feb 16, 2011 | Weedeater Featherlite Blower 18 Cc 150 Mph...

2 Answers

Is getting air in gas line, will not start


If the hoses are connected right and they are in good condition, it could be bad gas,sparkplug or carburetor needs cleaned and/or a rebuild kit. Check the link below for parts:


http://www.ereplacementparts.com/poulan-fl1500-type-blower-parts-c-16962_31724_31725.html

Feb 02, 2011 | Weedeater Featherlite Blower 18 Cc 150 Mph...

1 Answer

Need "L" and "H" setting on carb mixture screws


Lightly seat the screws all the way in....then back them out about 1 and 1/2 turns. From there here is how to do the final Zama diaghragm carburetor adjustments.
http://www.zamacarb.com/tipspage.html

Oct 30, 2010 | Weedeater 2 Speed Gas Blower FL1500LE ()

1 Answer

I have a Weedeater FL1500. I just changed the


Once it heats up either the spark plug or the ignition module is breaking causing them not to work. I would first check on the price of the ignition module, Then decide it is to expensive to repair and send it to the scrap man.
Good Day.

Oct 30, 2009 | Poulan Featherlite Gas Blower, with Low...

1 Answer

Need to know the gas:oil ratio for weedeater FL1500


100 ml of 2cycle oil to 4000 ml of fuel..Which is 40/1 ratio
100 ml of 2cycle oil to 5000 ml of fuel.. which is 50/1 ratio

4 o/z is 118.29411875006815 ml to 1 gallon of fuel (3.79 litres or 3790 ml) Which means 32/1 ratio...I find that to confusing,so it is easier to say 100 ml of oil to 3200 ml of fuel ===32/1.

Oct 27, 2009 | Poulan Featherlite Gas Blower, with Low...

1 Answer

Weedeater leaf blower FL1500


Check the fuel lines for cracks/breaks. If they are o.k., then:

Youwill need to disassemble the carburetor and spray withcarb.cleaner.Make sure the small screen is free of debris. (Should beable to see daylight through it.)

Use a Den Tek Brush, (http://www.drugstore.com/products/prod.asp?pid=165357&catid=1152),to clean the small portals in carb. These portals can become blocked. Reassemble and start.

If the carb. parts are more than 4 years old, you may have to replace them.

If you need further assistance on:
1. Fuel line replacement or
2. Carburetor kit replacement

Just let me know.

Jim

Oct 19, 2009 | Garden

Not finding what you are looking for?
Weedeater 2 Speed Gas Blower FL1500LE () Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Weedeater Garden Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

 steve
steve

Level 3 Expert

6457 Answers

Jerry Kramer
Jerry Kramer

Level 3 Expert

3904 Answers

Are you a Weedeater Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...