Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

2 Answers

Access printer door ,got it open, but can not close it

Can not close the access door for the printer 5300
thank you
taco_bell

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

You just need to apply the press on the front so it you will not bang hard. its hard to close you just need to apply a bit pressure enough not to break it..

Posted on Apr 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the access door removed and jammed paper out but cannot get the door back again

Posted on Mar 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer error : 6203 comes up.


Follow these steps:
  1. Open printer access door
  2. Turn off power,wait for 30-40 seconds,then turn on power
  3. Now turn on printer and it will show 'access door open'
  4. Close printer access door.
I hope this error 6203 will not occur then!

Cheers!!!

Oct 19, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak Easy Share 5300 Printer error Error code 6203


Error code "6203" can be resolved as follows:
First, you need to open the access door of the printer and disconnect the power adapter from it.
You then need to wait for at least 30 seconds for the printer to get reset.
As a next step, you can connect the power adapter back to the printer.
You can turn on the printer, if required. Once the printer gets powered up, a message "Printer access door open" gets displayed.
Once this message gets popped up you can close the access door of the printer. get more help for Printer Error Code 6203
Hope this helps you.

Sep 10, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Error code 6203


Error code "6203" can be resolved as follows:
First, you need to open the access door of the printer and disconnect the power adapter from it.
You then need to wait for at least 30 seconds for the printer to get reset.
As a next step, you can connect the power adapter back to the printer.
You can turn on the printer, if required. Once the printer gets powered up, a message "Printer access door open" gets displayed.
Once this message gets popped up you can close the access door of the printer.
http://www.fixya.com/support/t5951196-kodak_easy_share_5300_printer

May 15, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Error code 6203


Error code "6203" can be resolved as follows:
First, you need to open the access door of the printer and disconnect the power adapter from it.
You then need to wait for at least 30 seconds for the printer to get reset.
As a next step, you can connect the power adapter back to the printer.
You can turn on the printer, if required. Once the printer gets powered up, a message "Printer access door open" gets displayed.
Once this message gets popped up you can close the access door of the printer.
http://www.fixya.com/support/t5951196-kodak_easy_share_5300_printer

Mar 27, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kodak easyshare printer 5300 error code3501


3501 error code indicates that the printer access door is open(The door that you open to able to see the ink cartridges).

If you recieved this error code and yet printer access door is open try to reopen it and close it, then unplug the power cable of your printer for 10sec then Plug the power cable back.

You cannot do any task on your printer if you have this message 3501. if this isue not solve call kodak tech support toll free 1 800 421 6699

Nov 07, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

Kadak Easy Share 5300 printer. Screen reads "Please wait"-stuck


Try this one
Take out the inks and printhead
Leave the cartridge door open, then unplug the power cord from the back of the printer while the access door is open
Close the cartridge door once the cord is unplugged
Reconnect the powercord, turn on the printer, then your printer will look for your printhead "Printhead missing or not installed correctly..."
Then put everything back. make sure it will snap in to place. Then print a calibration page, then scan it. This is just over writing the error message.
Thanks Josh - Kodak Tech Support

Aug 12, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kadak Easy Share 5300 printer. Screen reads "Paper Jam Clear Jam


Try this one Take out the inks and printhead Leave the cartridge door open, then unplug the power cord from the back of the printer while the access door is open Close the cartridge door once the cord is unplugged Reconnect the powercord, turn on the printer, then your printer will look for your printhead "Printhead missing or not installed correctly..." Then put everything back. make sure it will snap in to place. Then print a calibration page, then scan it. This is just over writing the error message. Thanks Josh - Kodak Tech Support

Aug 12, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Print access door will not close


Hi..

See if something is stopping it to close...or call kodak:585-781-6231

Nov 25, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

5300 kodak eazyshare printer


Well, here is the proper way of fixing or troubleshooting that paper jam error in your printer

Open the printer access door and remove both of the ink cartridge, then remove also the printhead, after that close the printer access door, without those parts. Then it will show a message in the printer screen, "Printhead is missing or has come loose" or "Printhead Not Detected" Install the printhead, just the printhead without the ink cartridges. After that close the printer access door. Then it will show you a message"Ink cartridges is not installed,install ink cartridges". then open again the printer access door, then install the black ink cartridge without the color ink cartridge. then close the printer access door, then message must be " Color ink cartridge is not installed, install color ink cartridge" then install the color ink cartridge." the message must be,"New printhead is detected calibration require, load paper and press start"

Thats the way of overiding the paper jam error message of your kodak all in one printer
hope this will help you guys

by: E.brown

Happy Printing(", )
Kodak AIO tech support 1-800-421-6699

Jun 04, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

3 Answers

Printer access door won't close


just apply force in the front of the printer access door. Don't be afraid that you might break it...

Apr 21, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...