How can I know the version type or model name of my Amptron mothe

a moth

Hi Mikey

Since each GPS unit has own specific way of installation and setup, I will request the details of your product. Model name, model number, Software version (if any). After get the info I can give you step by step instructions

Thank you in advance

Hello the manual should be available here:

http://www.pcchips.com.tw/PCCWebSite/Downloads/ProductsDetail_Download.aspx?detailid=203&DetailName=Manual&DetailDesc=&CategoryID=1&MenuID=6&LanID=0

You will maybe need adobe reader to read content

Or select another model by selecting:
Mainboard.
Socket 462
The model number
And Version number of mainboard.

Or install this program for more detailed info:

http://www.piriform.com/speccy/download

Good luck

Have you tried *#06# and then "Ok" or "Call" or simply type in *#06# on the main menu (on the screen as you type numbers). If this isn't helpful, then it must be written somewhere inside the battery compartment. Turn off the phone and look inside the compartment where the model number is written.

If you need further help, let me know with the model name.

Good luck.

Thanks for using FixYa.

Hello,

Like most players, the device should contain 3 folders with the name
Music
Photo
Video.
Media is on the player, each type has its their specific folder name (should be int the matching location).
If deleted, make new folder names Music, Photo and Video.

When having problems with making a connection to the computer:
>
Having a version 1 player, the e280 (written on the backside):
1. On your Sansa player, press and hold the Power/Menu button for 15 seconds to turn the device completely off.
2. Slide the Hold switch so the orange portion shows.
3. On your PC, double-click My Computer (on MAC, open the desktop screen)
4. On your Sansa player, press and hold the REC button while connecting it to the PC.
5. Release the REC button when a 16MB-FORMAT drive partition appears under My Computer (on MAC, on the desktop screen)
>
Having a version 2 player, the e280v2 (written on the backside):
For step 1, 2, 3 and 5 follow the same steps as for version 1.
Only for step 4:
4. Press and hold the ( |<< ) button on your player, while connecting to the PC.

You need to goto the manufacturers website, find their support section and there should be a list of drivers for your specific machine. Installing these should resolve your problem. I have a list of links to most manufacturers drivers on my website.
Hope this helps,
www.PuterCare.com

http://www.softlookup.com/driveauthor.asp?id=135, Good luck

the ram memory you switched is bad take it out and see if it still does it , if not then you need new ram memory

Hi...

Although there is a huge list, I have found a place where there IS a manual for that specific MB

http://www.motherboard.cz/map.htm

Let me know if this helps

~~Jasta~~

check the wiring....there are 3 ports(line in, mic, speaker)..speakers wire should go into speaker port. also check power of speakers is on/off.