Question about Televison & Video

1 Answer

I HAVE NO STREAMING, ERROR CODE KEEPS APPEARING ON THE MONITOR, REQUESTING SSID INFORMATION. PLEASE ASSIST.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

The SSID (Service Set IDentifier) is a token which identifies a 802. 11 (Wi-Fi) network.

Please provide more information regarding the hardware involved with your problem, including make and model number of your flat panel TV, is one is involved, and any relevant set-top boxes, to better aid us in determining and solving the cause of your problem.


Posted on May 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Keeps saying error code 051031


Assuming you are referring to the Wii console, this is suggested troubleshooting:

Hit the link below for access to the posted troubleshoots listed

Nintendo Customer Service Nintendo Wi Fi Connection Error Code Results

Error Code: 051031
The only wireless network within range of your Wii console is not configured or is not compatible with the Wii.
  • Check for interference that may be preventing a successful connection. Click here for tips.
  • Check to see if the router you are using is a known to be incompatible. Click here to view our list. If your router is known to be incompatible, we recommend using a different router if possible.
  • Make sure that the SSID (network name) matches exactly to what you have entered in the Wii console's settings. To verify:
    1. Login to your router's settings (click here and select your router, if available, for information).
    2. Look for the section for SSID (typically in the "wireless settings" area).
    3. After you find the SSID (network name), verify in the manual settings of the Wii console that the SSID appears exactly as listed in the consumer's router. This includes making sure capitalization, spaces, or special characters match exactly.
  • Look up your router, if available, in our list of wireless routers, and check for any special notes that may be necesary to get the connection to work properly.
  • The router may not be assigning an IP address to the Wii console, and a connection using the "Manual Settings" may be necessary. Click here for help.
  • Your router may require a firmware update to work properly with the Wii console. Firmware updates can usually be found on the router manufacturer's website; consult the manufacturer for more information.
  • If the problem persists, try our general troubleshooting steps.

Sep 30, 2015 | Video Game Consoles & Games

Tip

Wii Error Code 50300 - 50399


This error is caused by incorrect internet connection settings, such as network name (SSID), WEP/WPA keys, or any manual settings.<br /><br />To solve this error :<br /> Ensure you have correctly entered basic information such as network name (SSID) and WEP/WPA keys.<br /> Try changing the channel of your wireless router to either channel 1 or channel 11 which can increase download speeds. Be sure to test both channels to see which works better or faster.<br /><br /><br />If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response<br /><br /><br />LETMEFIXIT<br />

on Jan 30, 2011 | Video Game Consoles & Games

1 Answer

Website not displayed error http 500


The Web server (running the Web Site) encountered an unexpected condition that prevented it from fulfilling the request by the client (e.g. your Web browser or our CheckUpDown robot) for access to the requested URL.
This is a 'catch-all' error generated by the Web server. Basically something has gone wrong, but the server can not be more specific about the error condition in its response to the client. In addition to the 500 error notified back to the client, the Web server should generate some kind of internal error log which gives more details of what went wrong. It is up to the operators of the Web server site to locate and analyse these logs.

500 errors in the HTTP cycle

Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle when it communicates with the Web server:
  • Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
  • Open an IP socket connection to that IP address.
  • Write an HTTP data stream through that socket.
  • Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
This error occurs in the final step above when the client receives an HTTP status code that it recognises as '500'. (Last updated: March 2012).

Fixing 500 errors - general

This error can only be resolved by fixes to the Web server software. It is not a client-side problem. It is up to the operators of the Web server site to locate and analyse the logs which should give further information about the error.

Fixing 500 errors - CheckUpDown

Please contact us (email preferred) whenever you encounter 500 errors on your CheckUpDown account. We then have to liaise with your ISP and the vendor of the Web server software so they can trace the exact reason for the error. Correcting the error may require recoding program logic for the Web server software, which could take some time.

Jan 28, 2013 | Facebook Social Network

1 Answer

Error code 51032


  • Login to your router's settings (click here and select your router, if available, for information).
  • Look for the section for SSID (typically in the "wireless settings" area).
  • After you find the SSID (network name), verify in the manual settings of the Wii console that the SSID appears exactly as listed in the consumer's router. This includes making sure capitalization, spaces, or special characters match exactly.
afor more help visit CBR Tech Solutions

Oct 20, 2012 | Nintendo Wii Console

1 Answer

We keep getting error code 51099 when we try connecting to our wireless router


  1. Try adjusting the "Channel" your wireless router broadcasts on. We highly recommend setting your wireless router to either channel 1 or 11. This can potentially increase the download speed. For information on accessing your router's settings, click here to select the brand name and model number of your router (if available).

  2. Please make sure that your router is not on our list of incompatible routers. Click here to view the list of known routers that are experience shows are incompatible. If your router is listed, then it is likely not compatible with the Wii console's online connection. If your router is not listed as being incompatible, please proceed to step #2.

  3. Verify that the proper Connection File (1, 2, or 3) is selected in the Wii System Settings. If you have multiple connection files setup, and you have recently received a system update, it is possible that the update has caused the Wii console to select a different Connection File. Click here for step-by-step instructions on viewing your connection settings.

  4. Make sure that your network's name (SSID) matches exactly to what you have entered in the Wii console's settings.
    1. Log in to your router using the default IP (consult the router's owner's manual for assistance).
    2. Look for the section for SSID (typically in the wireless settings area).
    3. After you find the SSID (network name), verify in the Internet Settings of your Wii console that the SSID is appearing exactly as listed in your router. This includes making sure capitalization, spaces, or special characters match exactly.

Mar 01, 2011 | Nintendo Video Game Consoles & Games

1 Answer

Please describe solution of error 413 problem:


HTTP Error 413 Request entity too large
Introduction
The Web server (running the Web site) thinks that the HTTP data stream sent by the client (e.g. your Web browser or our CheckUpDown robot) was simply too large i.e. too many bytes. What constitutes 'too many bytes' depends partly upon the operation being attempted. For example a request to upload a very large file (via the HTTP PUT method) may encounter a ceiling on upload file size set by the Web server.
413 errors in the HTTP cycle
Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle:

  • Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
  • Open an IP socket connection to that IP address.
  • Write an HTTP data stream through that socket.
  • Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
This error occurs in the final step above when the client receive an HTTP status code that it recognises as '413'. Frank Vipond. September 2010.
Fixing 413 errors - general
This error seldom occurs in most Web traffic, particularly when the client system is a Web browser. The problem can only be resolved by examining what your client system is trying to do then discussing with your ISP why the Web server rejects the number of bytes sent by the client system.
Fixing 413 errors - CheckUpDown
This error should simply never occur on your CheckUpDown account. If it does, it typically indicates defective programming of our systems or of the Web server which manages the site. The length of the HTTP data stream we normally send is relatively small and well within the limits of what most Web servers should accept.
Please contact us (email preferred) whenever you encounter 413 errors - there is nothing you can do to sort them out. We then have to liaise with your ISP and the vendor of the Web server software to agree the exact reason for the error.
hope this helps

Mar 01, 2011 | Computers & Internet

1 Answer

What do i need to replace to fix error code p0700 on a 2002 dodge intrepid


(DTC) CODE # P0700....Transmission Control System (MIL Request) Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it.

I hope this helps....let me know if I can assist further !!

Feb 21, 2011 | 2002 Dodge Intrepid

1 Answer

I need to know my wep key or ssid codes, whats the difference? i need it to set up for my ps3 online


WEP (wired equivalent privacy)

The privacy protocol specified in IEEE 802.11 to provide wireless LAN users protection against casual eavesdropping. WEP refers to the intent to provide a privacy service to wireless LAN users similar to that provided by the physical security inherent in a wired LAN.


When WEP is active in a wireless LAN, each 802.11 packet is encrypted separately with an RC4 cipher stream generated by a 64-bit RC4 key. This key is composed of a 24-bit initialization vector (IV) and a 40-bit WEP key. The encrypted packet is generated with a bitwise exclusive OR (XOR) of the original packet and the RC4 stream. The IV is chosen by the sender and can be changed periodically so every packet won't be encrypted with the same cipher stream. The IV is sent in the clear with each packet. An additional 4-byte Integrity Check Value (ICV) is computed on the original packet and appended to the end. The ICV (be careful not to confuse this with the IV) is also encrypted with the RC4 cipher stream.

WEP has been widely criticized for a number of weaknesses:

Key management and key size
Key management is not specified in the WEP standard; without interoperable key management, keys will tend to be long-lived and of poor quality. Most wireless networks that use WEP have one single WEP key shared between every node on the network. Access points and client stations must be programmed with the same WEP key. Since synchronizing the change of keys is tedious and difficult, keys are seldom changed. Also, the 802.11 standard does not specify any WEP key sizes other than 40 bits. 

The IV is too small

WEP's IV size of 24 bits provides for 16,777,216 different RC4 cipher streams for a given WEP key, for any key size. Remember that the RC4 cipher stream is XOR-ed with the original packet to give the encrypted packet that is transmitted, and the IV is sent in the clear with each packet. The problem is IV reuse. If the RC4 cipher stream for a given IV is found, an attacker can decrypt subsequent packets that were encrypted with the same IV or can forge packets.

Weakness: The ICV algorithm is not appropriate
The WEP ICV is based on CRC-32, an algorithm for detecting noise and common errors in transmission. CRC-32 is an excellent checksum for detecting errors, but an awful choice for a cryptographic hash. Better-designed encryption systems use algorithms such as MD5 or SHA-1 for their ICVs. 

Authentication messages can be easily forged

SSID (Service Set IDentifier)
The SSID (Service Set IDentifier) is a token which identifies an 802.11 (Wi-Fi) network. 


The SSID is a secret key which is set by the network administrator.

You must know the SSID to join an 802.11 network. However, the SSID can be discovered by network sniffing. By default, the SSID is part of the packet header for every packet sent over the WLAN.
SSID Security Issues

The fact that the SSID is a secret key instead of a public key creates a key management problem for the network administrator. Every user of the network must configure the SSID into their system. If the network administrator seeks to lock a user out of the network, the administrator must change the SSID of the network, which will require reconfiguration of the SSID on every network node. Some 802.11 NICs allow you to configure several SSIDs at one time.
Default SSID's

Most 802.11 access point vendors allow the use of an SSID of "any" to enable an 802.11 NIC to connect to any 802.11 network. This is known to work with wireless equipment from Buffalo Technologies, Cisco, D-Link, Enterasys, Intermec, Lucent, and Proxim. Other default SSID's include "tsunami", "101", "RoamAbout Default Network Name", "Default SSID", and "Compaq".
Disabling SSID Broadcasting

Many Wireless Access Point (WAP) vendors have added a configuration option which lets you disable broadcasting of the SSID. This adds little security because it is only able to prevent the SSID from being broadcast with Probe Request and Beacon frames. The SSID must be broadcast with Probe Response frames. In addition, the wireless access cards will broadcast the SSID in their Association and Reassociation frames. Because of this, the SSID cannot be considered a valid security tool.
An SSID by any other name

The SSID is also referred to as the ESSID (Extended Service Set IDentifier).


Airsnort, Aircrack 2.1, Cain & Abel are some of the wireless packet sniffing tools which can decode the authorization key.

Dec 23, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Every time i try to get on youtube it comes up.But when i click on my account it says 400 bad request. when i tryed to click on my friends video of gymnastics it says 400 bad request. Please Help Quick


Introduction
The Web server (running the Web site) thinks that the data stream sent by the client (e.g. your Web browser or our CheckUpDown robot) was 'malformed' i.e. did not respect the HTTP protocol completely. So the Web server was unable to understand the request and process it.

It almost always means bad programming of the client system and/or the Web server. 

400 errors in the HTTP cycle

Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle:
Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs). 
Open an IP socket connection to that IP address. 
Write an HTTP data stream through that socket. 
Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information. 

This error occurs in the final step above when the client receives an HTTP status code it recognises as '400'.

Fixing 400 errors - general

There is a low-level program bug in the client or the Web server or both. If you do not have access to the source code for these systems, the only thing you can do is refer the problem to technical support people at the companies that developed the systems.

Fixing 400 errors - CheckUpDown

You should never see this error at all when you use our CheckUpDown service. It indicates that the two systems (our robot and the Web server) fundamentally disagree on the syntax of HTTP data streams.

Please contact us directly (email preferred) whenever you encounter 400 errors. Only we can resolve them for you. Unfortunately this may take some time, because we have to analyse the underlying HTTP data streams and may have to liaise with your ISP and the vendor of the Web server software to agree the exact source of the error.

Jun 14, 2009 | YouTube Videos

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...