Question about Kenmore 63032 Electric Dryer

2 Answers

Doesn't work at all

Nothing happens when I press start botton

Posted by on

  • 1 more comment 
  • old yler Apr 09, 2008

    when i push and hold the start button,, there is a click, click, clicking from behind the timer control knob and nothing else--when i release the start button, it stops--so it must be getting power

  • go gt Apr 15, 2008

    mine is doing exactly the same thing,door switch clicks and have verified appropriate power to dryer,any suggestions including troubleshooting would be greatly appreciated.

  • SpecialKMM Jul 27, 2008

    Nothing happens when I push the start button. Lever clicks inside dryer and light goes on and off. When I turn the timer, I can hear a little humming like the heater is working.



    Any suggestions?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go gt found a broken belt

Posted on Apr 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Check the door switch. With the door open, on the upper right side of the tub opening there should be a little lever. Push on it and you should hear a click sound. If the lever is broken or no click sound, you need to replace the switch. If that checks good check your circuit breakers and power cord and outlet.

Posted on Apr 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power botton flash and no start


check your ram.......via system info...

Jan 29, 2014 | Acer TravelMate 4000 Notebook

1 Answer

My nokia n86 doesn't switch on after update ovi what can i do


try to reformat your phone.. press the following number keys ( *, 3, call botton green, on botton) hold for up to 10 seconds until it starts up with start up tone of nokia and logo. press the four bottons to recover your mobile as the same when you first buy it..good luck

Jul 09, 2011 | Nokia N86 Smartphone

1 Answer

I have a whirlpool duet HT. The control lock botton is on. So the washer will not start it does nothing. I unpluged it, hold in the unlock door botton nothing works. The door opens and close I just...


Hello Welcome to FixYa here is the answer your searching for..Press and hold the "End of Cycle Signal" button for approximately three seconds until the "Control Locked" indicator light shuts off. The control panel is now unlocked. If this was helpful please rate me Thanks :)

Jun 12, 2011 | Whirlpool Washing Machines

1 Answer

None of the bottons work, tried to cancel but off came on.


Ok, will it allow you to reset the clock? That has to be done before you can use the oven.

May 20, 2010 | Jenn-Air 27 in. Electric Single Wall Oven...

1 Answer

How do you unlock the control from not working


Here is a link to the user manual - it will show you a picture of where the hold switch is located:
http://www.rcaopal.com/pdf/M40xx_IB.pdf

Mar 30, 2009 | RCA OPAL M4001 MP3 Player

1 Answer

I press the power botton and nothing happens


It's possible that the spring clip behind the power button is broken and won't allow the power button to fully make contact. That's a fairly inexpensive fix. Or, some of the cables/wires could be loose, but I'm thinking (from your description) that it may just be the spring clip.

Feb 16, 2009 | HP Pavilion 533w (P9859AR#ABA) PC Desktop

1 Answer

Kitchenaid dishwasher woudl not work MOD KUDPO1FLWH6


is it on steady??? or blinking??? if on steady try pressing nad holding the button with the "lock" symbol on/or above it, thinknits the heat button, for 3 secs it will "unlock" the controls, if blinkin then its a diff issue, may be a bad door switch not recognizing hte door being closed therefore wont start,

Dec 02, 2008 | Dishwashers

1 Answer

Praktica DC50 Digital Camera


pickup the camera and through it into the bid sea

Nov 13, 2007 | Praktica DC50 Digital Camera

Not finding what you are looking for?
Kenmore 63032 Electric Dryer Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...