Question about Canon PIXMA iP1300 Printer

1 Answer

Cartridge is not properly installed...

My brand new cartridge for pixma ip1300 wont work anymore after the first time i used it..the error message says that the cartridge is not properly installed..i checked it, removed it and place it many times but still, same message..what could be the problem? is my cartridge already broken or the printer? please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,335 Answers

The chances are that the chip on the cartridge is defective. Have you tried another cartridge? If you can, take the defective cartridge back to the vendor and get a replacement or refund. If it worked once, it is likely the cartridge and not the printer.

Posted on May 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There's an error message The ink cartridge is not installed properly... But then the cartridge is properly arranged


try these
u need to hold down resume botton for 5 second then it will reset the ink level

Jul 12, 2010 | Canon PIXMA iP1300 Printer

Tip

I am having canon pixma ip1300 inkjet printer. it worked properly till 13th...


Hello,

Things you will need.
Needle nose pliers.
Paper towels
97% rubbing alcohol
Plastic gloves.
Flashlight
Disposable waste container, lined with plastic.
Disposable plastic tray about 6x9 or thereabouts.
Plenty of ventilation, outside if need be.

a. With the printer on, open this lid as if to change cartridges.

b. Turn Printer off. Unplug the printer. Unattach the communication cable. You will be moving it to a work area with excellent ventilation, such as outside.

c. At the far right where the the cartridges normally park themselves when not printing you will see a platform with rectangular compartments. When the cartridges park, this platform rises, seals off the nozzle area and captures any leaking ink, which till happens today.

d. Examine the platform with your flashlight and you will see what looks like sponges in the compartments. This material with holes in it, like a sponge, is plastic.Put on your gloves.

e. Place a paper towel folded over on itself underneath this platform as best you can to catch any spilling ink.

f. Use paper towels soaked in alcohol slightly and your needle nose pliers to push
the paper towel into each compartment, gently at first, until the majority of ink is
removed.

g. This will take quite a long time and plenty of paper towels and patience. So be
patient and ready for the long haul. Avoid smoking and the fumes.

h. At some point the sponge material, itself, may become dislodged and loose.

When you witness this, go ahead and remove it carefully using your needle nose
pliers and place it on some paper towels placed inside your disposable plastic tray.

i When you have one or both, if needed or more sponges removed and in the tray,
pour alcohol over these until the ink runs pretty thin. Leave to everything to dry.

i. Use a paper towel damp with alcohol and your pliers to clean out the compartment and its sides as best you can.

j. When you have completed these tasks allow the compartments and sponges to dry.

k. You are ready to reassemble the sponges into the compartments. Do so now.

l. Nearly done; take a towel wet with alcohol and hold it very gently against the bottom of the ink cartridge until ink flows freely onto the paper towel. If its stubborn, knock

the cartridge gently but sharply against a hard surface with the alcohol soaked towel held against the nozzle area.

k. Re insert the cartridges now.

l. Return the printer to its working location, attach power, attache the comm cable and with the lid closed apply power.

m. Run your printer through its normal setup routine, deep clean the print heads, run a nozzle check and finally do a print head alignment.

m. Your Printer is now ready to be used again.

Thank you,
Worldvet

on Apr 15, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

My ink was newly refilled. but when i used it to print, a dialog box appeared saying that the ink cartridge was not installed properly. how can i fixed? do i need to buy a new ink?


make sure that the contacts are clean. If you used a refill kit and not purchased a brand new cartridge, then that could be a problem, and you may need to get a new one.

Dec 08, 2009 | Canon PIXMA iP1300 Printer

1 Answer

Problem with my canon printer ip1300


You can try this it works for my 1500 printer.
Go to the printer settings and turn off the ink low messages.
Switch your printer on and hold the paper feed switch down for the count of five the orange light should flash. Then switch off the power and switch back on again the green light should stay steady. If you do not come right on this one you can email me at grayjem@mweb.co.za

Aug 10, 2009 | Canon PIXMA iP1300 Printer

3 Answers

Cartridge not installed properly


Need to make sure that is is on there firm and snap in the right way.

Jun 25, 2009 | Canon PIXMA iP1300 Printer

1 Answer

An Ink cartridge is not installed properly and the ink cartridge cannot be recognized


buy 1liter of gasoline and pour it on your IP1300 and then fire it up... I have the same problem and I already solved it! Canon is wasted!!! Just buy other brand.

Apr 21, 2009 | Canon PIXMA iP1300 Printer

3 Answers

Ink cartridges cannot be recognized in canon printer


Hello!
Remove the cartridges and gently wipe the cartridge contacts with a dry cloth, then put them back in. Then, hold the "resume" button for 10 seconds for each cartridge, that should reset them.
If that doesn't work, one of your cartridges (sadly) needs to be replaced.

Apr 15, 2009 | Canon PIXMA iP1300 Printer

2 Answers

Canon pixma ip1300 initialisation problem


I have a canon ip 1300 produces an error(both LED's are alternately blinking one blink for the green led and 5 blink from the orange led) then it will produce an error 5600.

Dec 03, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA iP1300 Printer Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...