Question about Hoover Elite U5061-900 Bagged Upright Vacuum

2 Answers

How to replace belt for hoover elite vacuum - Hoover Elite U5061-900 Bagged Upright Vacuum

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hoover Master
  • 12,061 Answers

Http://www.hoovervacuumbelts.net/

How to replace

Disconnect cleaner from electrical outlet.

1. Place handle in operating position and turn cleaner over.

2. To remove bottom plate, insert end of flat screwdriver into wide area of right-hand slot and push handle of screwdriver to the rear. Repeat in left-hand slot.

3. Lift extension of bottom plate, rotate plate and remove from
cleaner body.

4. Remove agitator and broken agitator belt. (If belt is not broken but is stretched or cut, proceed with steps 7-10 and pull belt off motor pulley. Then continue with step 5.)

5. Slip agitator through new belt (with lettering toward outside of cleaner) and position belt in belt guide. Push end of belt into
opening in cleaner body. Reposition agitator making sure to
align flat sides of projection on belt end of agitator with flat sides of slot in cleaner body.

6. Place the three tabs on bottom plate into slots in front of cleaner body. Snap bottom plate into place over agitator.

Posted on May 29, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You just push the belt into the slot??? Isn't it supposed to hook onto something that turns the roller?

Posted on Aug 20, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Buffalo12980
  • 625 Answers

SOURCE: Belt Replacement in Hoover Savvy

go to thehooverstore site. find your machine and they'll have exploded diagrams for your machine - your should be able to tell how to replace the belt.

Posted on Sep 22, 2007

reddevil6
  • 1673 Answers

SOURCE: Replace the belt

Take off the bottom plate, put the new belt on the motor shaft first, then stretch it to go over the pulley, it is hard, but it will stretch to go over it.

Posted on Mar 29, 2008

Agent Don
  • 310 Answers

SOURCE: How to replace power cord on Hoover WindTunnel upright vacuum

http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=40540&thid=517499
How to replace power cord on Hoover Windtunnel...
Posted by SaxTeacher on Apr 15, 2008
The cord on my Hoover Windtunnel upright vacuum is damaged from having been run over while vacuuming. I purchased a replacement power cord, agitator brush, belt, and filters from the Hoover web site.
I have installed the new brush, belt, and filters. I'm ready to install the replacement cord, but I can't figure out how to access the interior part of the vacuum! I tried removing many different screws but none of them seemed to give me access to the necessary area. Any help would be appreciated!



Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
Hoover U6616-900 Windtunnel Bagless Upright
Depending on where the cord comes out, you may want to check the owner’s manual for the exploded view of the cord area. Usually the cord comes out of the handle and there should be handle screws to release the existing cord and when you replace the cord mark the wires so that you will replace the new cord in the same manner. If it comes out of the body of the vacuum there are recessed screws that will let out into the vacuum to replace the cord. You don’t want to exceed the repairs cost to the price of what you paid for it. The decision should be yours, example: if the repairs costs are $200.00 and you paid $279.99 then @ that point you would have to decide if the repair costs are worth or do you want to pay the lower cost of repair and continue on. Just a suggestion... You may want to check with your local vac dealer. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Don – The Vac Man
Go Ahead. Use Us.

Posted on May 07, 2008

reddevil6
  • 1673 Answers

SOURCE: Belt Replacement

Take the bottom plate off, the brush roll and belt are there. the belt goes around the brush roll and hooks to the motor shaft. If you can't get to the motor shaft, then you will nee to remove the top cover also.

Posted on May 13, 2008

Agent Don
  • 310 Answers

SOURCE: installing belt on hoover self propelled upright vacuum

http://geeksquad.fixya.com/ThreadView.aspx?prdid=40544&thid=641399
Installing belt on Hoover self propelled upright...
Posted by Fryeburger on Jun 02, 2008
Need help installing belt on Hoover self propelled upright vacuum

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover Ultra U6430-900 Wind Tunnel Bagged Upright. The best way to install the belt on a Hoover to replace one or both of the belts @ the same time for the best cleaning. The average belt change is every 4 to 6 months for best results. There is a tool that looks like a screwdriver that has a right or left angle on the end that serves as a belt puller and to hook the belt(s) onto the brushroll 1st and then take your puller and then pull or stretch the belt onto the motor pulley. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

http://www.a-1vacuum.com/ 1-800-657-1874 Customer Service
Thanks, Don the Vac Man
Go Ahead. Use Us.

Posted on Jun 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover Elite 300 belt replacement?


Take the broken belt to a vacuum cleaner repair shop to match it up to a replacement.

May 27, 2013 | Vacuums

1 Answer

I need a replacement belt for Hoover Elite upright vaccum ,model no. U5043-930. What belt do I get?


Hello,

Your vacuum cleaner originally came with Hoover belt part number 38528027, however Hoover has now discontinued this part number, and replaced this belt with the new belt which is part number 38528040.

The new belt is a little bit smaller then your old one, but unfortunately this is the only belt that Hoover currently makes that will fit your model.

Here's a direct link to our website if you still need to purchase one:
http://www.govacuum.com/agbelhoovpar7.html

I have also uploaded the parts diagram and instruction manual for you. The parts diagram gives you every single part number for all parts on your vacuum should ever need to know another part number. The owners manual will give you step by step instructions on how to change the belt, as well as other maintenance instructions.

Part Diagram for Hoover U5227-930:
http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/Part-diagram-hoover-u5043-930.pdf

Owners manual is actually for the commercial version of your vacuum, but this will be identical to your instruction manual which Hoover doesn't have available for free:
http://www.hoover.com/pdfs/manuals/C1414900.pdf

I hope that this information was helpful to you. If it was, please be so kind and rate my repair helpful by clicking the thumbs up icons in the top corner of the repair.

Thank you very much,

Chris J.
GoVacuum

Apr 04, 2010 | Hoover U5227-930 Elite Upright Vacuum

1 Answer

How do I change the belt for the Hoover Elite


Hi,
Follow this link to a website that will show how to change belt (it aslo has illustrations). Click first link listed on page.

http://www.info-vacuum-cleaner.com/hoover-vacuum-cleaners.php

Hope this helps.

Jan 26, 2010 | Hoover Elite Rewind Bagless Upright...

1 Answer

Hoover elite how do i put the belt on


Here is the belt you need: Hoover U5061900 Belt
Simply turn the machine over and you will see (4) screws, remove them and you will be able to access of the belt.

Dec 14, 2009 | Hoover Elite U5061-900 Bagged Upright...

1 Answer

My HooverDeluxe Elite Rewind became extra loud


If the belt is really worn it can cause that. I wold try changing the belt if you haven't recently. Here are the belts you need:

Hoover Elite Rewind Belts


Nov 14, 2009 | Hoover U6630-900 WindTunnel Bagless...

1 Answer

How do I change the belt on my Hoover Elite Dual Purpose Vacuum cleaner? The belt part # is 38528-027. Where is the motor pulley?


The hoover belt number you listed (38528027) has been changed by Hoover to 38528040. Below I have listed a link to the manual that has instructions and a link to the belt you need. Hope this helps!

Hoover Elite Manual

Hoover Elite Replacement Belts

Nov 02, 2009 | Hoover Elite U5061-900 Bagged Upright...

1 Answer

My hoover elite rewind is making a louder noise and I can smell something burning when I use it. I have replaced the belt but this did not help.


the smell is either the motor or the belt, if motor hope it is under warranty, if belt make sure brush roll spins freely and replace belt, if brush roll not spin freely replace it first

Aug 27, 2009 | Hoover U5507900 Elite Rewind Bagless...

1 Answer

How to take the bottom off to replace the belt on a Hoover Elite U5061-900


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=749807
Generic problem for all Vacuums
How to take the bottom
Posted by 4456 on Jul 07, 2008
How to take the bottom off to replace the belt on a Hoover Elite U5061-900

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Some Hoover Elites have either screws or clips and the bottom plate should come off without a problems. Or if that is not the case then once you remove the screws then the top cover will come off and you can replace the belt from the top. If you have further questions please feel free to contact your local vacuum cleaner dealer in your area, or contact the Hoover website and or the cust serv phone # @ Hoover listed below. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 07, 2008 | Vacuums

2 Answers

Replace the belt


on the bottom there is a few screws remove cover and there is a roller brush there and the rest should be self explanitory

Oct 16, 2007 | Hoover U5227-930 Elite Upright Vacuum

Not finding what you are looking for?
Hoover Elite U5061-900 Bagged Upright Vacuum Logo

1,357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...