Question about kawasaki Scotts Damper Kawasaki Z1000 03 Requires Minor Welding

1 Answer

Bike runs good but after about 45 min of riding it

My 2004 kawasaki z1000 runs good but after about 45 min of riding it shuts down and wont start back up . but after sitting for a day will run good again ??

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Hello there:
try turning you're spit **** to reserve and see if still does the same thing if so you're more than likely looking at needing to replace the vale adjusting pads this will cause the problem of not running right i had same problem with a 1998 Kawasaki after the adjusting pads were flat-end out... so this should solve the problem best of luck to you sincerely D Jones

Posted on May 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What colour is my Kawasaki z1000 j1

Hi, Mark for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Kawasaki Motorcycle Paint ColorRite
Bike manufacturers paint code
Kawasaki Z1000 Service Manual
Kawasaki Z1000 ABS Owner Manual

Sep 05, 2016 | kawasaki Z 1000 Motorcycles

2 Answers

04 Gsxr600 jerking and engine dies after riding for awhile.

I have an 05 with the same problem. Sounds like your STVA went out. Do you still have your butterflies wired open? I know how to repair the stva fixed mine, and saved hundreds....if your still on this post email me so we can get our bikes fixed. also check your kick stand sensor! This can malfunction and cause same stalling problems.

Apr 22, 2012 | 2004 Suzuki GSX-R 600

1 Answer

When riding down the road bike runs great for 10 mins then shuts completly off then starts right back up

It sound like you might have a fuel tank cap that isn't venting, if you have another key try placing it in the fiel cap and then when the bike starts to cut out pop open the cap and see if it will pick back up, if it does then you need to replce the fuel cap.

May 01, 2010 | 1996 kawasaki VN 800 Vulcan Classic

1 Answer

2003 Kawasaki Z1000 just started holding back and spitting

Repair your vehicle right away. Just click on the link I attached 2003 Kawasaki Z1000

Sep 01, 2017 | 2003 kawasaki Z 1000

1 Answer

Kawasaki z1000 wont start and the f1 light flashes

The flashing FI is telling you that the Fuel Injection computer has detected a problem in the system. Some problems are minor (dirty air filter) and the computer will still allow the bike to run. Some problems are major (plugged up injectors) and the computer will not allow the engine to start. You will need to have a dealer check the computer diagnostic reading to find out where the problem is.
Can I get a “very helpful” rating on this answer?

Aug 23, 2009 | 2005 kawasaki Z 1000

2 Answers

Foul plug

It seems your piston ring needs to be replaced since its worn out. i am saying so because of the way the bike is being used. Since its 2 stroke, engine oil from the sump is making its way int the firing chamber and depositing on your sparkplug. Therefore pay special attention to the last ring, thats the one which uses the oil for lubrication...........sodeep

May 04, 2009 | 2003 kawasaki KX 250

1 Answer

'04 volusia still shutting down

I would recomend checking to be sure the fuel and vacum lines n the tank are installed correctly, Open the fuel filler and start the bike and see if it has any change on the problem, if so you have a vacum issue.

Mar 10, 2009 | 2004 Suzuki VL 800 Volusia

Not finding what you are looking for?
kawasaki Scotts Damper Kawasaki Z1000 03 Requires Minor Welding Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Scuba Diving & Snorkeling Experts

Bill Boyd

Level 3 Expert

49228 Answers

ray gallant

Level 3 Expert

50296 Answers

Are you a kawasaki Scuba Diving and Snorkeling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides