Question about Frigidaire 20.3 Cu. Ft. Frost-Free Upright Freezer - White

1 Answer

Temperature not low enough

This freezer is about 10 years old. Last summer we had a problem with it cooling down and we unplugged it for a couple of days and quite a bit of water puddled on the floor. Does this just need a recharge because it seems to be doing the same thing..

Posted by on

  • Robert Moller
    Robert Moller May 29, 2010

    Your indicating a defrost problem. After you plugged unit back in did temperature drop ?

  • thefordfam May 29, 2010

    After it was unplugged the temperature dropped back down to where it should have been.

    thank you

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,524 Answers

Replace defrost timer.

Posted on May 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore upright frost free freezer mod #253.26432100. A couple of months ago everything defrosted and the unit was not running at all. I unplugged it cleaned it and plugged it back in, it turned...


You have a problem with the ADC.

Frigidaire has also jumped into the market with an adaptive defrost board. The fresh food section light switch and light bulb must work. To initiate a defrost cycle, open the door and push the light switch in and out 5 times within 6 seconds. The compressor and fans should shut off and the defrost heater should come on. Open the door and push the light switch in and out 5 times within 6 seconds to remove the refrigerator from the defrost mode and back into a cooling mode.



This product comes equipped with an Adaptive Defrost Control (ADC). To activate manual defrost, press and hold the Freezer temperature UP (WARMER) key while pressing the Fresh Food temperature DOWN (COLDER) key 5 times within 6 seconds. A "d" in the freezer temperature window and "F" in the refrigerator temperature window will display when the heater is activated. To deactivate manual defrost, press and hold Freezer temperature UP (WARMER) key while pressing the Fresh Food temperature DOWN (COLDER) key 5 times within 6 seconds. "d" and "F" will be displayed until the defrost cycle is complete. (approx. 8 minutes)

Nov 23, 2010 | Frigidaire 20.3 cu. ft. / 575 liter...

1 Answer

We have a Amana BR18 Easy Reach bottom freezer. The fridge is turned up all the way, barely keeping food cold. The freezer is not freezing anything (ice, etc.). The freezer is still blowing cool air, but...


Low refrigerant assuming the compressor is always running and not being shut down by the thermostat.

You can hook up an ammeter to the unit to see if the current consumption is below spec, another sign of low gas situation since the motor is not working as hard as under normal conditions.

Jun 10, 2017 | Freezers

1 Answer

It seems the my freezer is not cooling down. When I set it up, as the instructed by the freezer manual, I turned the temperature setting to level 4. Then after waiting 24 hours, I adjusted the setting to...


I would unplug it and leave it set level. When you tilt it some of the oil in the compressor can get up into the upper pare. in some cases if the motor can't move it will either burn up or burn out the starting capacitor or coil. Plug it in again the next day and see what happens. Small freezers may take a long time to cool down and they need something in them to cool. Put pans of water or something in it and see if it will get cold enough to freeze them

Sep 21, 2010 | Haier 3.5 cu. ft. Chest Freezer HNCM035E

1 Answer

Fridge does not cool down


dear sir,
if your freezer,s compressor is running the i think its low gas problem please contect to your service technician for refilling refrigarant .

hope answer the question

thank you

please vote!

Jul 01, 2010 | Engel MT45FU1 Chest Freezer

1 Answer

My freezer is not cold enough to keep food frozen...


the "e" usually means it has an error. it could be a bad temperature thermistor or a bad control board. the most likely is the board.
i hope you are less then 1 year old as the board can be quite pricey, about 150 bucks.
you could try to unplug the unit for a few minutes and then plug back in and see if the code goes away and returns to the cooling mode.

Dec 29, 2008 | Frigidaire 20.3 Cu. Ft. Frost-Free Upright...

1 Answer

Frigidaire not cooling & freezing cold enough


We ahve a two year old Frrigidaire Freezer. every year same time it seems to correct itself(?), like self defrosting etc, and takes a long time come back to its cooling level. This is made in brazil G series. Please help.
V/r Syed

Dec 23, 2008 | Frigidaire 13.7 cu. ft. / 388 liter...

1 Answer

Chest Freezer not cooling


Please don't rate this solution, as anything but FixYa brings my rating down, but here's what you've got:
You have a refrigerant leak (commonly referred to a Freon, but these days usually R134A refrigerant). Some refrigerant has leaked, so you are still getting some cooling, but there is not enough refrigerant left to cool throughout the entire evaporator coils. This is NOT a repairable condition, as the coils are foamed in place and not accessable for leak repair. If this unit is under 5 years old (typical sealed system warranty) the manufacturer will most likely replace your freezer with a new one. If over 5 years, you are out of luck. Buy a replacement freezer.

Oct 12, 2008 | Whirlpool 10 cu. ft. / 283 liter Chest...

1 Answer

Freezer Problem


If it started to cool again the compressor was running. Check the condenser and make sure it is clean. Provide as much air movement through the garage as possible . 100 degrees is a high temperature to be operating a refrigerator in.

Jun 10, 2008 | Frigidaire Freezer 16.7 cu. ft. Upright...

2 Answers

Master-Bilt Freezer doesnt cool enough


The only thing I could suggest is looking at the evaporator (inside coil / cold bit) and making sure it is not frozen over reducing the airflow through the coil. If it is then put it onto a couple of defrost cycles to clear the ice build up. Not sure exactly of this type but would assume you also have a sight glass on the external unit, you can check this to see if when running the sight glass is clear (fully charged). Another check is looking at the compressor and the larger of the two lines (suction) should be cold back to the compressor (this line is normally insulated). However I would suggest your best course of action is a good refrig. techy. Hope this helps.

Sep 03, 2007 | Freezers

1 Answer

Hotpoint FZA50 Freezer not cold enough


try it on max setting. lint clogging up stuff in the back? needs defrosting? low on refrigerant (freon)? call repairman for that last one

Jul 10, 2007 | Hotpoint 4.87 cu. ft. / 138 liter Upright...

Not finding what you are looking for?
Frigidaire 20.3 Cu. Ft. Frost-Free Upright Freezer - White Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Freezers Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

AJMAL KHAN

Level 2 Expert

382 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Frigidaire Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...