An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: how to change password for wrh54g. i lost my set-up...
Please follow the steps in order to resolve the issue:
1.Connect the router to a computer.
2.Type 192.168.1.1 in the web browser and hit enter
3.Enter the username and password(default password is admin and leve the username blank)
4.On the setup page click "Wireless" tab and fill the sections as mentioned
Wireless network Mode:Mixed
Wireless network Name-As per your choice
Wireless RF Control-Standard
Wireless SSID Broadcast-Enable
Wireless RF-Disable and click Save Settings.
5.Click Wireless Security and fill the sections as mentioned;
WEP Encryption 64 bits 10Hex digits
Key1-Enter 10 digit or 10 letter password(example-your telephone number) and click Save Settings
6.Click Advanced Wireless Settings and fill the sections:
RTS Threshold-2307 and click Save settings.
7.Click Access Restrictions
From here you can able to restrict the number of users for your computer. You can set the parameters based on days and time.
After you set the restriction policy click Save Settings and turn off the router for 30 Seconds and then turn it on.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The default credentials for your router are "blank" for username and "admin" for password. In case you have already change these, you have to reset the router (using the proper button) in order to come back to the factory settings.
In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer. If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.
Thanks and regards Please kindly rate this solution Stelios direct FixYa link: http://www.fixya.com/users/technical114
A router recovery password tool will allow users to recoverall lost passwords or user names. It can uncover all characters hidden behindasterisks as well. This retrieval application can support alphanumeric ormultilingual characters and allows users to save a recovered password list to aspecified location. An in-built help option is provided that describes to theusers how to recover their password. For more information into this visit http://www.vtechsquad.com/ and get thedetails on password recovery...
If you have forgotten the router's password then you have to reset the router to factory default to access the interface again. Then you can use the router's default user name and password, that is admin and admin (or username: " " (leave it blank) and password: admin (all in lower case)
You can find the default passwords on the following website;
You need to reconfigure your WAN settings of router to your new internet service provider settings. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Click on WAN settings in general setup and set as your service provider settings.If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.
In case you have lost the CD, you can access the Router throu Web Browser by typing the IP Address of the router in the address bar. The default IP is 192.168.1.1 and the user name and password are admin (this is also written at the back of the router). You can make all configurations and settings through web interface and CD is not at all required.
Let me know if any further clarification/ assistance is required.
Good Luck! Appreciate generously if the solution could have been of any help! CreativeTECH
Open up internet explorer or your favorite browser
type in 192.168.1.1
if you did not change the user name and password, username should be left empty with nothing in the username portion and the password is "admin"
if you did change the password and forgot the router password then you must hit the reset button on the back of your router to default the router and will need to reset up your wireless security settings.
but, once you get into the linksys administration page goto the wireless security section and you will see your wireless password there.
open up a internet explorer window, at the top of the window where the url text box is, delete all text and type 192.168.1.1, the usual user name and password is admin for both, i think these routers give the user and password at the bottem of the modem as long as the factory defaults havent been changed it should allow you access to your router settings, if the number above dosent work try 192.168.2.1. hope this helps