Question about Motorola Mobility RAZR V3
Hi,Reset all options except unlock code,
security code, and lifetime timer:
Settings > Initial Setup > Master Reset
To reset all options, you need to enter the
Security Code (000000)."
Posted on May 28, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Cell phone keypad will not work
you will need to take this to a professional but the problem is either a disconnected cable or somehow the firmware for the keypad got damaged and needs to be put back on the phone.
Posted on May 13, 2007
SOURCE: Razr V3M locked
You will have to call the carrier and ask them for the PUK or PUC. This is the password unlock code. They will know exactly what you need. This will allow you to override the password and reset it. Some phones have 2 password codes. If you unlock it and some features still are inaccessible, then you may need the PUK2 code also.
Posted on Dec 08, 2007
SOURCE: Motorola Razr V3xx
I dropped my v3i into my cats bowl and had it up and out of it within a second.. the thing is this .. notice the grid that we talk into it's poor design is open to liquids.. the worse part about this phone however isn't the poorly designed grid.. it's that these phones and water are pure enemies. water kills razr's. I know this from reading many forum posts. I sent mine off to a guy I found through ebay his ebay name is eminence.. he's a really nice guy.. great w/razrs.
Posted on Jun 03, 2008
ok so this may sound really weird, but i massaged me keypad gently with my thumbs for a few minutes at a time and my whole keypad came back. I was texting with a wet hand and my whole keypad went wonky on me then i freaked out and came to this site. well i read a few of the soulution suggestions and mixed them. I turned off my phone and pressed the buttons one by one. Then i turned on my phone and pressed the only that would work so that the pone would get hot. Then i gently blew into the side of the phone in the crack that is the two halves of the phone and then i gently took both thumbs and massaged the keypad from zero to arrows. Soon i got my 6 to work then my 0 then all my numbers and my whole keypad came back to life quickly. I hope this works for someone else.
Posted on Sep 22, 2008
I had the same problem--it turned out that there was a tear in the underside of the keypad. The keypad was replaced. It cost $35, but the phone works fine now!
Posted on Oct 06, 2008
Tips for a great answer:
Apr 18, 2013 | Motorola Mobility RAZR V3xx Cellular Phone
Jun 14, 2009 | Motorola Mobility RAZR V3
Jun 07, 2008 | Motorola Mobility RAZR V3
Apr 11, 2008 | Motorola Mobility RAZR V3
363 people viewed this question
Usually answered in minutes!