Question about Brother SE-270D Computerized Sewing Machine

1 Answer

E 1 is being displayed which seems to be effecting the bobbin

E 1 is being displayed which seems to be effecting the bobbin. The needle will not lower and bobbin seems loose.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 405 Answers
Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am having a problem with a Singer Sewing Machine, Model 6268. When I try wind the bobbin it seems as though the needle is scraping the metal area under the bobbin case.


Singer Sewing Machine Needle... Repair Questions - Fixya

www.fixya.com/support/p7766091-singer_sewing_machine_needle_bar
Recent Singer Sewing Machine Needle Bar questions, problems & answers. ... 0 Answers I am having a problem with a Singer Sewing Machine, Model 6268. When I try wind the bobbin it seems as though the needle is scraping the metal area ...

My Singer Curvy 7880 will not wind bobbin. It starts to wind ...

www.fixya.com/.../t24096734-singer_curvy_7880_will_not_wind_bobb...
Apr 12, 2014 - Neec to - Singer Sewing Machines question. ... When I try wind the bobbin it seems as though the needle is scraping the metal area under the ...

I oiled my machine and cannot put the needle plate back on ...

www.fixya.com/.../t24483790-oiled_machine_cannot_put_needle_plate
May 22, 2014 - I have a Singer Sewing machine, Model #6268. .... When I try wind the bobbin it seems as though the needle is scraping the metal area under ...

Repairing a Sewing Machine ' ThriftyFun

www.thriftyfun.com/.../Machines/Sewing_Machines/Repairing-a-Sewing...
My sewing machine keeps jamming, down in the bobbin area. ... If it seems really tight, on the side of your bobbin, there should be a little tiny screw for which you .... Itried everything else first: changed needles, to a brand new spool of thread and bobbinthread, ... My Kenmore sewing machine model 158.16800 freezes.

Dec 13, 2015 | Singer Sewing Machines

1 Answer

I have a hyundai 8 stitch sewign machine been working brillant but last night it kept missing the tread and the thread breaking or jabbing . today looking at it i see when it jabs the Bobbin Case Inner...


The top thread breaks

1. the needle thread is not threaded properly

2. The needle thread tension is to tight

3. The needle is bent or blunt

4. The needle is incorrectly inserted

5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew

6. the threads were not drawn to the rear after sewing

7. The thread is either to heavy or to fine for the needle

8. Try a different spool or cone of thread


Bobbin thread breaks


1. There is a right way & wrong way to insert the bobbin in the case --when you insert the bobbin in if it doesn't stitch correctly turn the bobbin over see if that helps or bobbin case is not inserted correctly


2. Lint has collected in the bobbin holder


3. The bobbin is damaged & doesn't turn smoothly


4. Lower thread tension is two tight

if the sewing machine has a top loading bobbin, you may have to have the sewing machine checked to see if there is something wrong with the bobbin case or the hook and hook race.
I suggest try a new needle--one for the fabric being sewed
also try another bobbin
rethread the sewing machine top and bobbin, using every thread guide.

Aug 21, 2013 | Sewing Machines

1 Answer

My thread keeps breaking. bobbin thread seems to be alright, have changed thread, needle.


The needle thread breaks
1. the needle thread is not threaded properly
2. The needle thread tension is to tight
3. The needle is bent or blunt
4. The needle is incorrectly inserted
5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew
6. the threads were not drawn to the rear after sewing
7. The thread is either to heavy or to fine for the needle

Dec 16, 2012 | Kenmore 19606 Computerized Sewing Machine

1 Answer

Bobbin thread tangles


when this happens have you check to see if the thread has come off the thread take up lever?

Feb 09, 2012 | Brother CE5000 Computerized Sewing Machine

1 Answer

Necchi 535FA--the tension seems to be off. The thread keeps breaking or pulling out of the needle. When i sew on cotton it was working then when I switched to a stretchy faux crushed velvet the tread...


Good day!

please try this simple tips:

Good day!

A sewing machine operator can often help themselves when their machine does not operate properly.
Here are some simple instructions, which if properly used can save time and mechanics service calls.
TROUBLE;UPPER THREAD KEEPS BREAKING;
This could be trouble;================Do this;
1.Top tension to tight================loosen tension 1 turn
2.Machine improperly threaded=========check threading
3.Thread twisted on guide post========"
4.Thread twisted out of tension======="
5.Take up spring bent or broken=======Check action of spring
6.Thread jumped off pull off finger===Check threading
7.Needle bent or burred===============new needle
8.Bad cone of thread==================try another cone
TROUBLE;LOWER THREAD KEEPS BREAKING;
1.Bobbin tensionspring to tight=======Loosen tension slightly
2.Bobbin threaded wrong===============check threading
3.Bobbin wound to tight or uneven=====try new bobbin
4.lint or thread on bobbin case=======clean inside case
5.Lint or thread inside hook==========clean inside hook
6.Bobbin case nicked bent or burred===check/change case
TROUBLE;MACHINE STARTED SKIPPING STITCHES;
1.Needle bent or burred===============change
2.Needle set in crooked===============Check
3.Thread jumped off take up spring====check threading
4.Thread jumped off pull off finger===check threading
TROUBLE STITCHES SHOWING LOOPS;
1.Forming loops on top of cloth=======Tighten bobbin tension
======================================or loosen top tension.
2.forming loops on bottom of cloth====Tighten top tension
3.Bobbin placed in case incorrectly===remove and replace
4.Bobbin thread slipped from under====check threading of
tension===============================bobbin case
5.Lint or thread in top tension=======clean between tension discs


Thank you and good luck.

Jun 06, 2011 | Sewing Machines

1 Answer

I am sewing outdoor fabric and using the strong thread and having problems with the bottom thread (bobbin), it is loose and sewing right. I have tried tightening the tension on the bobbin. It was sewing...


Probably a little heavy duty for a domestic machine - most don't like thread through the bobbin tension device any heavier than 50 grade.

Some tension devices have a hole that you can use to bypass the tension spring (Elna is one) which allows thread like perle cotton to be used in the bobbin. But you still can't put it through the needle (just on the underside for decorative sewing effects) .

In the past I've needed to sew vinyl tractor seats where I was stitching the vinyl to a 1/4" thick foam and after trying everything (roller foot, leather needle) on the domestic machine, I bought a Singer 20U industrial machine with 1 1/2 hp motor in a table in order to seam this weight of textile. Different system needle used and the bobbin could handle heavier weight thread.

Probably not the response you wanted though.


May 02, 2011 | Baby Lock Imagine

1 Answer

I am sewing a cotton piece of fabric for a dress and i do not know how to set the tension for cotton


The tension for cotton is set the same way tension is set for any fabric:

1. The thread should pull freely with a small resistance before/after it goes through the needle, on many machines that's half way on the tension adjustment.

2. The bobbin thread when dangled by the thread with the bobbin inside the case should drop down a bit when slightly flicking your wrist like you do with a yo-yo. If it reels out to the floor the tension is too loose. If it doesn't drop at all it is too tight.

3. Now make sure you use the right type of needle. For cotton you want a "sharp" and for reg. weight cotton about a size 10 maybe 12.

Now take a piece of strap cotton material like you're going to sew a seem and sew with a wide zig zag. Example the top side and then the bottom. They should appear identical, flat with needle holes at each side where the thread disappears to the other side. You should see no loop where the threads over lap each other and the material should not be puckering in the middle.

If that is not what you see then think this way:

The TOP side of the stitch is effected by the BOTTOM thread. the bobbin tension.
The BOTTOM side of the stitch is effected by the TOP /needle tension.

Adjust the responding tensions until the stitch looks the same on both sides. Now you are ready to sew your cotton! :)

Apr 26, 2011 | White Sewing Sewing Machines

1 Answer

I have the kenmore 385.18221 and I cant seem to draw the bobbin thread up. When I turn the dial the needle makes a clicking sound as it trys to bring the thread up but the thread doesn't come through. Is...


1.make sure the needle is not bent --lay the needle on a flat surface & roll the needle over, if needle does not roll good then replace
2.make sure there is enough bobbin thread to pick up
3.make sure the needle is all the way up in the needle clamp
it sound like the needle is hitting the shuttle hook, if the steps above don't work then take it to be serviced

Jul 28, 2010 | Kenmore Drop-In Bobbin 505S-21BH...

2 Answers

Needle not picking up bobbin thread. Seems threaded properly. lsd-1 (classic) Problem occurred after needle hit something perhaps the the cap spring which had some marks on it but no real damage. ...


change the needle, if bent it may skip, use top thread while holding to pull thru, turn bobin around to turn in oposite dirrection, bobins usually turn in 1 correct dirrection

Sep 28, 2009 | Sailrite Sewing Machines

3 Answers

Needle picks up bobbin thread but then thread gets stuck


I had exactly the same problem on the exact same model 3205FA. I'm not an expert, but have a little experience on solving my wife and daughter's sewing machine mechanical problems. I would suggest the following: A. Page 6 of the owners manual see item # 1...to be precise it is 1 1/2 times around. B. Page 7 at the bottom, Make sure the bobbin tension spring is set so that there is tension. When holding the tread the bobbin shouldn't unroll. If jiggled about 2-3 inches the bobbin should release about 1/3 of that distance. C. Page 8 at the bottom, ill. # 2. There are two flange holders and screws that hold the bobbin case in position located at about 5 and 7 o'clock. Make sure both screws are tight. This is important. D. Make sure the thread is treaded through the upper tension adjustment properly. See page 9 # Illustration C. Terrible illustration. Keep the dial generally in the green range. E. Put in a new needle, the needles that come with the machine are just short of terrible. Wouldn't hurt to buy good top quality needles for the machine.

Aug 22, 2006 | Necchi 3102 Mechanical Sewing Machine

Not finding what you are looking for?
Brother SE-270D Computerized Sewing Machine Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...