Question about Jenn-Air 27 in. Electric Single Wall Oven with Multi-Mode Convection

1 Answer

IT IS GIVING ME A MESSAGE - FOR SERVICE CALL 1-800 NUMBER

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jenn-Air Master
  • 3,053 Answers

Hello, chikeray

I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and farther back, It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this site may not have your exact model or brand, This link will help you tons. Here is a link to about everything you want to know about your oven, from repair to trouble shooting it. Even pictures and video's. Just scroll around and you will see tons of information to almost any question you might have on your Oven. If you go to this link and click around, I am sure you will find out so much about your oven, you will know more than the company that made it. The good thing about this link is, then you can make the decision of DIY or hiring a pro. Here Is the link for you to click on>>


http://home.howstuffworks.com/dishwasher.htm



Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks,Mike

http://home.howstuffworks.com/how-to-repair-an-oven.htm


Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help

Thanks,Mike



http://beta.fixya.com/users/mc1bean

Posted on Oct 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for the elements for this oven. Would you know where to look


Giving us the Make and Model would be nice. Look on the maker's website and instruction manual for the customer service phone number - you might get the parts from the maker directly.

Mar 09, 2016 | Ovens

1 Answer

Error message F6E6.What does this mean?


Although fault code "F6E6" most often indicates a communication failure between the User Interface and Appliance Manager board (Service Pointer W10538518), it could also indicate an incorrect electrical connection at the customer's home junction box. Sounds like you have some wires crossed!

Oct 18, 2014 | KitchenAid Architect ® II KEBS208S...

1 Answer

How do I get past the es and f2 message


F2 is generally an error indicating a bad sensor probe- it should read about 1100 ohms at 72 degrees F Help Me Find My Model Number RepairClinic com

Oct 16, 2014 | KitchenAid Ovens

1 Answer

My Jenn Air double oven giving error message saying low fan speed and will not work! Any suggestions?


It may be possible that the fan blades have built up grease and dust causing a drag on the blade. Clean the fan blade and see if it goes away.

Oct 02, 2014 | Jenn-Air Ovens

1 Answer

In the middle of self cleaning, the oven is giving us an error message that says "F2" and locked door. I buzzer continually goes off. What does this mean and what should we do about it?


900 degree oven does a number on electronics: overheat situation.
Bottom line: never do a self clean unless you have the money to buy new controls.

Dec 12, 2010 | Kenmore Ovens

1 Answer

Went to turn on self cln,


Hi


Thanks for using FixYa. F5-E1 error indicates that you’ll need to check the door latch/switch and replace the part that has gone bad. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 07, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Oven shows door locked and F 1 message...


If google and manufacturer website are of no help then ask a search agency like http://manualfox.com - They do a great job.
The service is not for free, but often worthy (you only pay if they find what you are asking for).

Send them model number and manufacturer name.

Jun 18, 2010 | Kenmore Ovens

1 Answer

My oven is giving me an F 3 error


an F-3 error message usually indicates a problem in
: the oven temperature sensor or its wiring circuit.

Jan 19, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Oven giving me a f-10 message


Hi.
Although I am not familiar with this model, it sounds like an overheating problem to me, could be a faulty thermostat, and the error code could be a warning of this.
Sorry I can't help you further. Please leave feeedback

Nov 30, 2008 | Ovens

1 Answer

Set probe temperature


If i remember correctly i believe this is actually a wiring issue. you would need to turn the power off open the control panel. and look for a control board with the probe connection on it. there should be a tech sheet in the compartment to help you identify it however if it is the problem they would be purple wires on the connector that need to be reversed.

Nov 27, 2008 | Ovens

Not finding what you are looking for?
Jenn-Air 27 in. Electric Single Wall Oven with Multi-Mode Convection Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Cindy Wells

Level 3 Expert

5127 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...