Question about Office Equipment & Supplies

1 Answer

Hi, at the moment my panafax UF-770 is printing a report for every transmission. I want to stop that, so that it only prints a report if the fax did not go through and the monthly or so report. I cannot find a manual on any panasonic site. Please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 589 Answers

To change the communications journal settings:

Press:

Function

7

Set

12

Set

1= off
2=always
3= incomplete only

Once you have chosen 1,2, or 3, hit Set

Hit STOP to exit programming mode.

This model only stores the last 100 transactions (sent or received faxes).

To print the last 100 transactions:

Press:

Function

6

1

Set

1

The machine will return to an idle / ready state when printing has completed.

Posted on Apr 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi could you tell me how to print the report for sending please to keep as proof to a number it was sent


Customizing the Transmission Verification Report You can use the Transmission Report as proof that you sent a fax. This report lists the time and date of transmission and whether the transmission was successful (OK). If you select On or On+Image, the report will print for every fax you send. If you send a lot of faxes to the same place, you may need more than the job numbers to know which faxes you must send again. Selecting On+Image or Off+Image will print a section of the fax's first page on the report to help you remember. NOTE:When the Verification Report is turned Off or Off+Image, the Report will only print if there is a transmission error, with NG in the RESULT column. 1 Press Menu/Set, 2, 4, 1. 2 Press ? or ? to select Off+Image, On, On+Image or Off. Press Menu/Set. 3 Press Stop/Exit.

Jul 21, 2011 | Brother MFC-620CN All-In-One InkJet...

1 Answer

Is is possible to go back two weeks to see a journal report on my brother mfc 9440 cn series? I didn't save a confirmation page and I need to see confirmation of a fax sent two weeks ago. Thanks


  1. Press the Menu key.
  2. Press the Up or Down Arrow key to select Fax and press OK.
  3. Press the Up or Down Arrow key to select Report Setting and press OK.
  4. Press the Up or Down Arrow key to select Transmission or XMIT Report and press OK.
  5. Press the Up or Down Arrow key to select the option you prefer.

    • Off
      Transmission verification report will print only if a fax transmission is unsuccessful.

    • Off+Image
      Transmission verification report will print only if a fax transmission is unsuccessful with a portion of the fax's first page printed on the report.

    • On
      Transmission verification report will print after every fax transmission.

    • On+Image
      Transmission verification report will print after every fax transmission with a portion of the fax's first page printed on the report.

  6. Press OK.
  7. Press Stop/Exit.

May 10, 2011 | Office Equipment & Supplies

2 Answers

HOW TO PRINT CONFIRMATION PAGE


Hi,

moz-screenshot.pngbet3_1.jpg

You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the time and date of transmission
and whether the transmission was successful
(OK). If you choose On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Choosing On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
When the Transmission Verification Report is
turned Off or Off+Image, the Report will
only print if there is a transmission error, with
NG in the RESULT column.

Apr 12, 2011 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Wont stop printing TX report!


moz-screenshot.jpgmoz-screenshot-1.jpgmoz-screenshot-2.jpgmoz-screenshot-3.jpgHere are some of the instructions you'll need, but you can also find more assistance by accessing the online Canon support site and searching the exact error message you get. (click here)

ssue:
ERROR LCD: INCORRECT PAPERSIZE
Solution: Reset the unit-IC D/PC 1000 Series

Reset the unit
  1. Slide the platen to the left.
    slide_platen_left.gif
  2. Slide the platen back to the right until it locks in place.


Here are instructions for changing the setting of the tx report:
Issue: How do I change the TX report
Solution: Changing the TX Report-IC D/PC 1000 Series

Changing the TX Report
  1. Press <Additional Functions>.

  2. Use <la.gif> or <ra.gif > to select [FAX SETTINGS], then press <Set>.

  3. Use <la.gif > or <ra.gif > to select [REPORT SETTINGS], then press <Set> twice.

  4. Use <la.gif > or <ra.gif > to select the option you want.
Name Description TX REPORT 111OUTPUT NO
111PRINT ERROR ONLY
111REPORT WITH TX IMAGE
111111ON
111111OFF
111OUTPUT YES
Enables/disables automatic printing of a transmission report. No report is printed.
Prints a report only when a transmission error occurs.
If you select PRINT ERROR ONLY or OUTPUT YES, enables/disables printing of the first page of the fax under the report.
Prints a first page only when a transmission error occurs.
The first page is not printed.
Prints a report every time you send a document.
(The factory default setting is in bold face.)


I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!



Apr 20, 2009 | Canon imageCLASS D880 All-In-One Laser...

1 Answer

I want to receive fax message with just one incoming ring.


press the following

function-7-monitor button 4 times, then start [*]- should say service mode then press 1 then 4-5-then start-start - clear then 1 then start then stop - stop

Jan 20, 2009 | Panasonic PanaFax UF-490 All-In-One Laser...

1 Answer

Not receiving faxes


there is an in/out button beside the number 3 , it needs to be bright green to be working. just press it a couple times

Sep 22, 2008 | Panasonic PanaFax UF-490 All-In-One Laser...

1 Answer

Two problems with fax machine


1-----press function-7-4-start-1-2-start-2-"always"-start-stop.

2----- did you shake the cartridege left to right like 15 time to move the toner arround.

Jul 30, 2008 | Panasonic PanaFax UF-490 All-In-One Laser...

2 Answers

PANAFAX UF-490 and VISTA


for alsader1
you can try a uf4000 print driver its just the newer version of the uf490

http://panasonic.co.jp/pcc/products/en/bfax/download/uf-6000/gdi/eng.html


for salva0804
you can not get copies of what you faxed out. you could print a com journal for future faxes

function-7-4-start-1-2-start-2-start-stop

Apr 19, 2008 | Panasonic PanaFax UF-490 All-In-One Laser...

1 Answer

Panafax UF-490 Fax


The fuser may be damaged or worn. A certified tech will need to replace it. Did you have a power outage? Ray

Jun 19, 2007 | Panasonic PanaFax UF-490 All-In-One Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98694 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...