Question about Kenmore 80809 Microwave Oven

1 Answer

Trying to change a fuse on microwave.

A kenmore MicroHood microwave model 721.80833500 has no power. Trying to replace the fuse. Found service manual, but does not show actual location of fuses. I think the microwave burnt out due to metal inside while cooking and hoping that only a fuse burned out.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 9,047 Answers

It may be the fuse or the thermal cutout / thermostat associated with the magnetron.

You say you have the service manual? If you mean the folded-up "mini-manual" that should show the relative locations of the parts in a perspective view.

Also, you can find exploded views at the Sears parts site.

Looking at the "interior parts ii" exploded view here, it shows the fuse (drawing reference # 5001) on the small RF noise filter board located on top of the air duct assembly.

You'll need to remove the oven from the wall to get to it for testing & replacement.

The installation instructions are handy to pull the oven from the wall.

If you've misplaced yours, the Sears site may have them free.

You can just enter your full model number at the Sears parts site.

On the resulting page, look to the right for the blue "View manuals" button. Click there.

trying to change a fuse on microwave. - caab351.jpg

That Sears-related site has many free manuals. While the manuals they list there are all free, they may ask you to register.

Many times, the owner's manual will have the installation instructions inside.

If yours is not listed there for free, you would have to order it through the
Sears parts site.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.


Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does F-7 error code on Kenmore Elite microwave mean


That's a problem with the inverter or another high voltage part.

Dec 24, 2012 | Kenmore Elite Over The Range Microhood...

1 Answer

Just need to re set the clock


Barbara, Google the model number with "manual" to locate (if you do not have it) the book.

Or, contact the customer service for this unit--I am sure with the recent time change they are getting a lot of calls.

Nov 08, 2012 | Kenmore Elite Over The Range Microhood...

1 Answer

How do i replace the surface light on my kenmore microhood model # 665 62612200


You will have to refer to your owner's manual for precise directions.

May 03, 2012 | Microwave Ovens

1 Answer

Kenmore elite model #665.61683101, has no power, plug works but microwave has no display, is there a fuse in this model?


There is a line fuse for this oven. Remove the cabinet and the fuse should be close to the line cord. Replacement fuses should be found at your local appliance supply house.

Apr 19, 2011 | Kenmore 62622 Microwave Oven

1 Answer

Microhood blowing house fuse


normally it should blow the units internal fuse first if its an internal issue, first check the line cord thoroughly for any bare wires at the case , then remove outer case asn see if cord is bare anywhere inside, then inspect unit fuse, take a multimeter and take a resistance check in an upper range og the meter of the disconnected h.v. diode, then disconnect h.v. capacitor(DISCHARGE) across terminals before touching and check this part, then lastly it could be the magnetron tube, or the hi voltage transformer, therse are VERY expensive items,you may vie to replace microwave then

Oct 04, 2009 | Microwave Ovens

1 Answer

Kenmore Microhood not working


I think it may be an internal fuse or a fusible link. You also have a series of contacts and switches inside that are set in place by the mfr. for safety. You could get it repaired for 50-75 dollars or a new one for 125-150 dollars. If you have checked the internal fuse, then just get a new one if the other one is older than 3-4 years.

Jan 11, 2009 | Microwave Ovens

1 Answer

Can I change the air duct of Kenmore microhood


You can find exploded views and order the manual and parts by entering your model number here: http://www.searspartsdirect.com

We're happy to help and we appreciate your thoughtful rating of our answer.

Jun 04, 2008 | Microwave Ovens

3 Answers

Kenmore microhood model 721.80833500


our tray that goes around and back and forth jumps the tracks and stops and turns the other way I can put it back on track before it makes a round it jumps the tracks again and starts going the other way is there a part that need replaced

Jan 13, 2008 | Kenmore 80809 Microwave Oven

2 Answers

Kenmore microhood


"Microhood" seems to be a slang term for the "microwave hood" (hood fan or exhaust fan) which is normally part of an over-the-range microwave oven or range. But these should be available separately, as I seem to recall. I would contact home centers such as Lowe's, Home Depot (if they still exist), etc., or a local appliance store.

Dec 06, 2006 | Kenmore 62622 Microwave Oven

1 Answer

Microhood turntable not working


You can find an exploded view of your microwave at http://www3.sears.com (yes, the 3 is there). Ref # 3009 on the drawing is the turntable motor. I would grab it by the shaft and gently try to turn it. If it's locked up or grinding, that's a sign it's bad. It runs $24.49 plus shipping: Part Description: Quantity: Part Number: Model Number: Price: TT MOTOR 6549W1S013D 721.64663300 $ 24.49 $ 24.49 Be sure to unplug the oven before you work on it. Hope this helps!

Dec 01, 2006 | Kenmore 63763 Microwave Oven

Not finding what you are looking for?
Kenmore 80809 Microwave Oven Logo

810 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...