Question about Televison & Video

1 Answer

I have a 2004 WS65713 that won't start

I have a 2004 WS65713. Yesterday it started having problems. First, the screen started blinking on and off. Then the remote wouldn't operate the volume control. I turned off the TV manually, pushing the power button. This morning the TV will not come on. I hit the reset button, the power button blinked and then went off. The power did not return. I unplugged the TV and let it sit about 1 minute and plugged it back in. The power button flashed but the TV will not respond to the remote, and will not respond to the power button on the front of the console.
Have you have had this reported previously?
What might I do to fix this - or is it something that I need a professional to fix?
Or, is the TV shot?
Please let me know what you can about this problem.
Thank you in advance

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

I am not sure without seeing the tv, but I believe you have a leaking fluid picture tube. Intermittent and unusual problems usually lead me to locating drops of fluid on the chassis. The fluid is conductive and corrosive and cannot be repaired. Try taking off the speaker grill and the small access board and VERY carefully, look for spots of fluid. Look carefully near the front of the printed circuit board (nearest you).

Posted on May 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mitsubishi WS65713. We had a power flicker and the green light started blinking and nothing we do stops it or gets our TV to turn back on?


the DM pcb has several capacitors on it that go bad
I think they are 100mf at 16v
replaced them all and it should take care of your problem

Oct 11, 2014 | Mitsubishi WS-65713 65" Rear Projection...

1 Answer

AH59-02402A REMOTE, WAS WORKING FINE LAST NIGHT AND EVEN THOUGH THE LIGHTS BLINKED ON IT I TRIED NEW BATTERIES STILL WILL NOT CONTROL BOX???


If it show it was doing updates, Thats probably why it wouldn,t work .Once it has updated ,IT will (Probaly) Work (Again)

Nov 07, 2012 | Televison & Video

3 Answers

LED LIGHT BLINKING OF HITACHI SPLIT AIR CONDITIONER


Did you figure out why the ac wasn't responding to the remote? I am having the same problem. I just cleaned out the filters but it's still not responding to the remote. I have already tried reset button in the remote, which didn't help. I am pretty sure that the remote is not out of battery.

Jun 18, 2012 | Hitachi Heating & Cooling

1 Answer

I SUPPOSE I HAD A PROBLEM WITH MY VIDEO CARD. I HAVE A SONY VAIO VGC-LT18E, AND SUDDENLY YESTERDAY MY DISPLAY HAS GONNE BAD. JUST IN SAFE MODE I COULD LAUNCH WINDOWS VISTA OPERATING SYSTEM. WHAT I HAVE TO...


if your video card is damage even in safe mode wouldn´t see the screen. put and external monitor to know what is happening, probably you need to re-install the gpu driver. goes sony web site to locate your driver. good luck

Jul 29, 2011 | Sony VGCLT18E Notebook

2 Answers

My alarm wont turn off. my car wont start. its a 2004 tiburon.


With alarm activated your ignition is disabled.Find the combination to disable it.With GM's you hold opposing buttons on the fob till it beeps twice. The dealer should help for no charge.

Feb 28, 2010 | 2004 Hyundai Tiburon

1 Answer

How do you set the garage door opener for a 2004 toyota 4runner LTD?


You hold the remote close to the three buttons on the vehicle. You choose which button you want the remote to transmit to, and you hold it down. With your other hand, depress the garage door remote opener, and hold it very close to the 3-button assembly. Wait for the red L.E.D. light to blink slowly. If it does not blink slow, continue moving the remote around, until it does blink slow. When it starts to blink slowly, stop moving the remote around. Wait until the light starts blinking rapidly. When the light blinks rapidly, the process is complete.

Oct 28, 2009 | 2004 Toyota 4Runner

1 Answer

Keyless remote entry


First try to replace batteries on remotes, 2. try reconfiguring the remotes only if the first doesn't work. And at last just try unplugging the negative of the vehicles battery plus check all your fuses the make sure that you're not have having any electric interference. Good luck !!!

Apr 03, 2009 | 2004 Nissan Maxima

2 Answers

GE D52GW12 turns off


I have the same problem, what the heck. it's over for it

Jun 09, 2008 | GE D52GW12 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...