Question about JVC DR-MH30S DVD Recorder

1 Answer

Not operating want power off, blue light want stop blinking, want eject.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Check power supply capacitors.
Check capacitors for leakage or swelling.
Check voltages on drives +5 and +12
I can't tell you whether hard drive is faulty or not.

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Sony dvp sr500h will not let me eject the disc and it displays Locked on the scree. How do I unlock it ?


The Blue Ray is just like a CD or DVD player.
If you have a disk in the unit and it will not eject through your my computer, find a paper clip and streghten it to about one inch.
On the face of the player, you will find a small hole. Insert the paper clip in the hole until you find the step. Bush forward and the door should open.

May 22, 2014 | DVD & Blu-Ray Players

1 Answer

My dvd wont eject. when i press open it blinks for a minute then goes to loading! then dvd will then play. I can hear it running but it will not eject the dvd.


unplug it for 10 - 15 mins... when you plug it back press the stop/eject quickly (player will automatic try to load disc)

Aug 09, 2011 | Toshiba SD-6000

1 Answer

Player will not eject, play or stop, standby light will not come on


hi,
If there is no standby light then you have to check the power supply of your blue ray player. Its will be an smps power supply. Very carefull while dealing with such power supply beacuse there will be Live areas in the board. You have to check the fuse in the smps. If the fuse is faulty The its sure that the smps driver MOSFET is short. Before replacing the fuse you have to check the MOSFET. If not it will lead to further dameges to your system.
If the fuse is ok and the power supply is perfect then the mother board of your player is faulty. If so then you have to contact the nearest Authorise servicing center to get it repaired.
ok

Aug 02, 2011 | Oppo Digital BDP-83 Blu-Ray Player

1 Answer

My panasonic dvd player shows locked when I tried to eject. I can't eject tehDVD. My kids could have jinxed it. Model panasonic sc-pt550 TQ


There are two lock conditions for this device.


If you can't eject the disc:


Enabling removal of disc

1. Select the DVD/CD function.

2. At POWER ON condition, press and hold down the stop button and the power button on the player for at least three seconds.

(The message, "___LOCKED_" appears when the function is activated.)


If you can't operate the functions:


Enabling operation of selector and disc

1. Select the DVD/CD function.

2. At POWER ON condition, press and hold down the play button and the power button on the player for at least three seconds.
(The message, "___LOCKED_" appears when the function is activated.)

Hope this helps!

Apr 08, 2011 | Panasonic DVD-S52 DVD Player

1 Answer

My sony SLV-D300P suddenly would not turn on. The blue ps button/light just flashes, but no attempt to turn the unit on works. It was working fine, without any problems, until this one occurred.


I have the same problem -- tried power reset, tried holding stop button for 5 second reset, nothing works. If I push the power button or the eject button, the blue light flashes momentarily then goes out.

Aug 28, 2010 | Sony SLV-D300P DVD Player/VCR

1 Answer

Cd compartment wont open and it is locked dvp sr200p sony


Ensure the child lock feature is disabled. Try Power resetting the Player.
Turn Off the player and remove the power plug from the wall outlet for 1 minute and reconnect it and check the operation.
If the disc tray still does not open, simultaneously press the POWER + STOP + EJECT buttons.
If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons or the RETURN + ENTER+ POWER buttons.
If the issue still persists, service might be required.

Jul 26, 2010 | Sony DVP-SR200P DVD Player

1 Answer

Will not stop auto


This particular Unit will blink Auto while it's trying to set the internal clock using your cable signal. Make sure your antenna or cable source is connected to the unit before you plug in the AC power. When it is done setting the channels and time the blinking will stop and display the local time. Please refer to page 16 of your user manual.

Jul 13, 2009 | Sony SLV-D360P DVD Player/VCR

2 Answers

There is a DVD in the player that wont eject or play.


Instead of a pinhole, there is a slot on the bottom of the DVD player that will force the disc out. There's a plastic lever visible on one side of the slot. I used a butter knife to push into the slot.

Nov 29, 2008 | Philips DVP642 DVD Player

1 Answer

DVD player will do nothing


Ok so I took the cover off to see if I could figure out the problem. Don't have a complete solution, but I did get somewhere. There is a silver cylindrical motor attached to the eject mechanism wheels on the VCR side. When I unplugged the tape from the back of the little motor, the progressive light goes out and the sound from the motor stops. When I manually turn the wheel/arm attached to the motor, the other wheels/gears turn and I can manually eject the tape. Also when I get to a certain point, my progressive light starts flashing like yours was. Anyway it all seems to be related to the little motor. I figure if you replace that, it would work. At least that is what I might try, I'll keep you posted.

Aug 27, 2008 | Sony SLV-D300P DVD Player/VCR

Not finding what you are looking for?
JVC DR-MH30S DVD Recorder Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

kakima

Level 3 Expert

96518 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...