Question about Black & Decker BL1900R Blender

3 Answers

The pulse light is blinking, but the blender will not work

The blender (cyclone) does not turn on. The pulse light is blinking--I have no idea why it will not stop blinking and the blender will not turn on. It is of course plugged in. It is one week old.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This worked for me - only took about 5 minutes (the amount of time it took for me to google Black & Decker and search through their FAQ)

Q. My blender stopped in the middle of blending. What happened?
A. Your blender has a motor overheat protection system that will automatically shut off the blender when it has been running too long with a heavy load. If this happens, unplug the blender and wait 10-15 minutes to allow the motor to cool down. Plug in the blender and resume blending.

Posted on Jun 03, 2010

  • Weird Dude May 04, 2011

    I fixed mine by putting it in the freezer overnight. It has not stopped working since and I use it a lot. I suspect that this reset the overheat sensor, assuming this is a bi-metal type, but not sure why this worked or how but it solved the problem. :-)

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Did this still doesnt work like I read its probably a burnt out motor. try the above method, if it doesnt work, do what the other person said throw that p.o.s. away and buy an antique blender it will last forever. dont shop at walmart if your buying anything you want to last more than a week disposable ****.

Posted on Aug 21, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

In the situation that the accompanying happens the client just uproots or modifies that ingredient(s) being referred to and pushes any mix period switch, after which the gadget is immediately eager to resume work. I exhibit the accompanying element every now and then by introducing this tackle of a sort into the jug with edge while the unit is an incredible off employment, and having the thought immovably against the base in the container while at the same time beginning some kind of cycle.
It can helpful for you to as well as you can check the review from the groomandstyle.com/top-5-best-blender-reviews/
you can get information about products which is good and brand for long time.

Posted on Aug 04, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you turn the blender on


which maker of blender
any lights on when turned on at the wall
any dial or pulse action ?

Jul 16, 2016 | Blenders

1 Answer

Why won't the blender start? the on/off light keeps blinking


my Ninja blender wont turn on, power button keeps blinking red ...

https://answers.yahoo.com/question/index?qid...
Dec 11, 2011 - I know I"m not supposed to drown myself in the toilet yet the don't build in a head protector. The blinking light won't go off. It worked last night ...

Ninja Blender Red Light Is Flashing ' Appliance Repair ...

appliancerepairquestions.com/question/ninja-blender-red-light-is-flashing/
Mar 29, 2015 - My new Ninja Blender has a power button that is flashing red. ... and the top of the blender is on and secure but the light keeps blinking / flashing. ... How do I set the oven off from demo mode asked by Anonymous, 2 months ago ....Whirlpool MDU1955XTSS2 won't turn on asked by Anonymous, 4 months ...

cuisinart blender red light flashing but Questions & Answers ...

www.fixya.com > Forum > Tags

Dec 26, 2015 | Euro-Pro Ninja Nj600 1000 Watt Xl...

1 Answer

Kitchenaid blender motor loud hum not working


Can you check it without the beaker on? It could be the blade seizing up, how free does it turn by hand?

Dec 02, 2012 | KitchenAid KSB560 5 Speed Blender

1 Answer

Black & Decker BLC12600B 650W Cyclone 12-Speed, the on button blinks and the blender is not working. I have put into different sockets, it just doesn't work.


Unplug the blender. Use a baking soda and vinegar solution to clean the metal contacts on the bottom of the metal blender blade. (You will see a small circular inverted washer looking thing). Use the solution on the main blender unit also. (You will see a small circular metal piece in the center) Scrub them both with the solution and wipe. These seem to be some type of sensors. I then replugged the blender back in and it worked for me!! Good luck!

Sep 13, 2010 | Black & Decker BL14500 Crush Master Work...

2 Answers

Blinking lite in black and decker cyclone blender keeps blinking and blender wont work at all!


Throw the Black/Decker away. I am going to. This is my second blender form them that has done the nonresponsive red light blinking thing. I figured that the first one was a lemon; however, it must be that Black/Decker is only concerned about meeting walmarts demands on price. Black & Decker's saying should be - Who needs quality when you can pay less the first time.

Jun 16, 2010 | Black & Decker BL1900R Blender

2 Answers

Cyclone blender - on light blinks and it won't operate


Had this problem couple of times. pushed the power cord in the blender as if there is lose connection inside. It worked.

Jan 03, 2010 | Black & Decker Blenders

1 Answer

Blender freezes with ee as an error black & decker cyclone 18 speed digital blender


Important: This blender has an intelligent system that
automatically shuts off the appliance after 2 minutes
for speeds 1 to 18 and after 20 seconds for the PULSE
and CRUSH functions. If this occurs, the LED display
shows "EE"; unplug the unit and wait 30 seconds.

Dec 26, 2009 | Black & Decker Blenders

1 Answer

Breville blender bbl550 stopps after 5 seconds any setting


Mine does this as well... 5 seconds of operation and then OFF.
My guess is this is a fail safe where the blender is turning itself off to avoid overheating and what could potentially cause this overheating is the blender is struggling to turn the blades. What could cause this struggling of turning the blades I am guessing is a lack of oil in the blades rotating parts.
If you hold the circular blade part and turn it, you'll probably find that its hard to turn? Mine is... and I oiled it up a bit and found I got a bit more usage out of it... although only temporarily.
Ideally I need to pull it apart and oil it properly.

Jan 29, 2009 | Breville BBL550XL 5-Speed Blender

1 Answer

Blinking lights on KitchenAid blender


Alternating blinking lights on a Kitchenaid blender indicate a bad circuit board which is unable to run the motor properly. Unplug the blender, take the jar off, and turn the spindle by hand. Then plug it back in. If it does not work properly, try a different outlet (perhaps not in the kitchen). If nothing works, the blender needs to be repaired.

Aug 27, 2007 | KitchenAid KSB3 Classic Work Top Blender

Not finding what you are looking for?
Black & Decker BL1900R Blender Logo

Related Topics:

6,306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Blenders Experts

Cindy Wells

Level 3 Expert

5166 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

john h

Level 3 Expert

12650 Answers

Are you a Black & Decker Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...