Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

2 Answers

My 5300 does´t print yellow my photo as a lot o red

I´d like to remove the printerhead of my 5300 kodak but i don´t know how to do

Posted by on

  • pilk41 Oct 13, 2008

    My 5300 worked fine for about 6 mts. now the black ink won't print , If it does it is very light . Won't print the entire page ,just picks up parts. Ihave replaced both ink cartariges what can I do

×

2 Answers

Still no black ink on the paper

Posted on Jul 21, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Unlatch the printhead by pressing the button in the upper-left corner of the carriage.
my 5300 does´t print yellow my photo as a lot o re - eda01fe.jpg
see User’s Guide page 75
you can see it at www.kodak.com/go/downloads
I would also advised you to do a deep clean by going to menu>clean printhead then deep clean.
Believe this has nothing to do with cartridges
contact aio support if this fails

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install new printerhead on easyshare 5300?


Visit www.kodak.com/go/printheadsupport to see live demo.

Nov 21, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

I have the easyshare 5300 and my color is bad on my printouts. I've tried the realignment and printer head cleaning options. Still the same. What should I do?


OPEN THE PRINTER ACCESS DOOR . remove cartridges and then printhead by taking ur finger on top most left side of the bulls eye. replace printerhead once again. now try to caliberate printhead. if u still gettin g bad prints, problem with ur printhead,kodak will replace it fir free call kodak @ 1800 421 6699

Jul 10, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Howdo you remove printerhead from Kodak 5500


Here is the manual for reference:

Kodak 5500 Manual

If you go to page 88, these instructions are given...with pictures.

1 Make sure the AiO printer is on.
2 Open the printer access door. The carriage moves to a center position.
3 Wait until the printhead is idle and silent, then pinch the pinch latch on the ink cartridge with your thumb and forefinger and lift it out of the print head. Remove both ink cartridges and place them on a flat surface with the ink pads up.
4 Unlatch the printhead by pressing the button in the upper-left corner of the carriage.
5 Remove the old printhead.

Thanks for using Fixya.

Jul 02, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Where do I get a printerhead for my Kodak easyshare 5300. I need one it will not print black or color ink.


Check this link: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=10589&pq-locale=en_US

Jun 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 printer all-in-one


If it is less than one year old you need to contact Kodak calling the number listed on the user manual. This printer has one year factory warranty.

Regarding the print head, it can fail even after few months with a bit of bad luck.

Call kodak.

Mar 29, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printerhead problems, error codes and only black prints


Need a new printhead. Call Kodak, they know this problem exists.

Jan 19, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Photos are too red printing on Kodak Easyshare 5300


After contacting Kodak and running through their trouble shooting site, they advised that the printer needs a new printhead which they supply free of charge.

Jan 09, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

NO user manual for new 5300 printer!!!!


If you want to switch to photo mode you have to have photo paper in the printer. As for the user manual you did get one, just not in paper form. Kodak has the user manual on the software CD or you can go to kodak.com. The reason it's not in paper form is because the user manual is more than 100 pages.

Oct 31, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Photo paper


1. Never put XtraLife paper from a printer dock in any inkjet printer. This paper is not made for inkjets. The ink will simply spill all over the place.
2. You can use any paper you wish that is inkjet paper but you must set the appropriate settings through the print manager if the paper is anything but Kodak inkjet photo paper. The 5100, 5300, and 5500 all recognize the backprint on the Kodak paper and automatically optimize the settings. Other brands of paper are not optimized in this fashion and therefore must be done manually through the print manager or software.

Mar 30, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...