Question about Baumatic F60 Stainless Steel Kitchen Hood

1 Answer

BABT83.2AL Canopy Rangehood The fan/suction is not working. A slight straining noise is heard. The light is working as is the display panel.

Posted by on

1 Answer

These units have a history of fan failure due to inferior 220 volt Italian fan.

I have just had fan fail and retrofitted a ebmpapst blower fan model D2E146HT6702 which is readily available in Aus for around $120.

The fan speed control is by inverter variable output so you don't use all the speed select wires that this fan has. Connect the Red wire on the range hood to the Black on the motor (High speed winding) and the Black on the range hood to the Blue on the motor (Neutral) and the earth to the earth (Green).

Disconnect and toss the cap in the white enclosure under the PC board enclosure (the new fan has the cap on board). Don't know how easy to fit in the range hood as mine is in an acoustic fan housing in the roof (makes it wisper quiet when running)

Posted on Aug 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan is not working but makes a humming noise at lower speeds and clanking noise at highest speed. When last working there was the clanking noise when I turned off the fan. Please help.


Then turn it off immediately just to be safe that nothing will be broken, can you see the interior? Is there anything broken or loose that might cause the noize? If yes remove.
If not try to clean it with a little cloth or anything, maybe it is too dusty.

Mar 10, 2016 | Electrolux RH36WC60GS Designer Glass...

1 Answer

Fan on cooker hood does not work but light works


It it new? Maybe the fan connection in the connection panel come loose or was not done properly from factory. Turn off the breaker to the hood and inspect the wires and connections, if all is good, then maybe the switch needs replacing. Good Luck!

Jun 25, 2012 | Kuppersbusch Designer Island Canopy Cooker...

1 Answer

Qasair CM900 Rangehood Motor not working properly


I have a twin motor Qasair Heritage 1200mm wide canopy and recently noticed (after 8 years of great service) that one of the motors was having a difficult time getting to high speed compared to the other. Turns out that it is indeed a faulty capacitor. I had the service tech out from Condari, and both capacitors replaced, restoring the high speed function to both fans. Call out fee was $99, each capacitor $15 and labour amounted to $25 for a grand total of $154. Very happy to hear the full force of the fans again! Here is a picture of the old capacitor, which is housed inside the metal box on the side of the fan unit.
qasair-cm900-rangehood-motor-not-working-jh3mtdyhsbuajkonnzlnhwkf-4-0.jpg

May 20, 2012 | Range Hoods

1 Answer

Fan stopped working on our Bosch rangehood (Type D-FX41-8 or E-Nr. DKE935AAU). Lights working but the fan only inhibits a humming sound.


hi ;
the fan motor needs repair , the cause of humming is the vibration of induction on AC current in the motor.
if the motor stopped means it has faulty shafting and bushing, or maybe the starting capacitor needs a replacement, don't turn it on or use it to prevent burning of induction wire,
also it needs a qualified technician to repair ,

Sep 03, 2011 | Range Hoods

1 Answer

How to install a rangehood on a glass splashback with no pre-drilled holes in the glass


If the glass is frosted you can use a clear glass adhesive. Put blobs approximately 6 inches appart on the rear of the glass and push to wall.

Nov 18, 2009 | Faber 36quot; Stainless Wall Canopy...

1 Answer

Problem changing halogen bulbs on perla rangehood


The more I worked with it, the more I discovered that the real problem was that a screw was not all the way screwed in and it was preventing the panel from sliding. Another problem I may have is finding the glass covered halogen bulb.

May 13, 2009 | Faber Perla 602599 Kitchen Hood

1 Answer

Some air blows downwards from rangehood


clog? or the shutter on the end wont open.

Nov 25, 2008 | Range Hoods

1 Answer

Broan allure fan and light


Check that you have not accidentaly switched the wall socket off in the cupboard above the rangehood. The slide switch could also be faulty.

Oct 30, 2007 | Broan-NuTone AllureĀ® I WS136BC Kitchen...

Not finding what you are looking for?
Baumatic F60 Stainless Steel Kitchen Hood Logo

630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baumatic Range Hoods Experts

Treefrog15
Treefrog15

Level 2 Expert

126 Answers

Jay Plesset

Level 3 Expert

2809 Answers

Todd B

Level 3 Expert

571 Answers

Are you a Baumatic Range Hood Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...