Question about Intel CELERON 2.66Ghz CPU AND MOTHER BOARD (CPU4266CEL) Motherboard

3 Answers

LAN.. i have a broadband connection, but when i try it in my desktop, the notification always shows that the network connection is unplugged.. but the broadband is working on my laptop, what wiil i do?? the motherboard of my desktop is imperial GL VE 20021218 and the OS is windows xp 16 bit,just email me for your suggestions.. you are very well appreciated thanks..

Posted by on

  • Wayne Mineard
    Wayne Mineard May 28, 2010

    Have you tried installing (or reinstalling) the driver for your network adapter?

  • ralence_03 May 29, 2010

    that is my problem now, i cant reinstall the driver because i dont have one, can you give me some sites were i can possibly find an appropriate driver installer... thanks

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,901 Answers

Is this motherboard in an e-Machine computer? If so, what is the model number?

Have you tried their support site?

If this is not an e-Machine, I see as you have 2 choices:

1) You can purchase a separate network adapter to fit an empty slot. They are relatively cheap these days.

2) There is a site called Driver Detective. The website is http://www.drivershq.com/ and you can run a scan (it is safe) of your computer. It will let you know if there is a driver available for it. It will also show all drivers available for your system. That's the good news. The bad news is that there is a charge for their service should you want them.

Hope this has been some help to you.

Wayne

Posted on May 29, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Reset cmos IC on motherboard for 5 sec .....unplug the system before doing this...

Posted on May 28, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 148 Answers

Save all your important files , then reformat your operating system

Posted on May 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Dell inspiron 537 sesktop pc and the lan adapter is not recognizing the ethernet lan connection. I reinstalled the drivers etc but it still show " not connected ". Is there anyway to...


To connect to the Internet, certain hardware and services are needed, which are listed below. Without any one of these items, connection to the Internet is not possible.
  • Broadband Internet Service (also known as Internet Service Providers or ISP) - Telephone companies (also known as DSL, which uses a telephone line) and cable TV companies usually offer Internet service.

  • Broadband Modem - Normally, a broadband modem can be rented or purchased from the ISP.

  • Computer with a Network Adapter - This is usually a device located inside the computer.

  • Broadband Router - A router is used to connect all of your computers to the network (but is not needed for a single computer). The router also provides a way to connect to the Internet through the Broadband Modem.

Oct 12, 2011 | Dell Inspiron 537 (DDCWQA1_7) PC Desktop

2 Answers

I'm trying to connect a remote desktop equipped with Linksys network adapter to internet via a home LAN. Though the network shows that it is connected to the home LAN, when i attempt to connect to...


The setup disc for the router only needs to be run once when setting up the router to work with your internet provider and modem/router. You can try putting the disc in your desktop computer and reconfiguring the router.

Feb 28, 2011 | Cisco Linksys WirelessG Broadband Router...

1 Answer

945 GCL Network Problem


if you have a broadband connection that can handle USB connectio, this will give you your lan back so you can download any drivers required. This is especially true of the Bt router and is very handy.....otherwise you'll need to download a driver from a mates computer if you can?

Dec 15, 2009 | Intel Computers & Internet

2 Answers

Its always show at the the monitor the " A network cable is unplugged".


If you are connecting to the Internet using a wireless connection and your LAN card in the computer does not have a LAN cable connecting it to a hub or router then you will get a message "A network cable is unplugged".
If you don't use a wireless connection and you only connect to the your network/Internet then the problem is either the LAN cable has come loose in the computer's LAN card or at the router or the LAN cable is faulty.

Nov 17, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

2 Answers

NO AUDIO AND INTERNET dsl LAN ICON


install your sound and ethernet drivers. if you don't have the driver CD anymore. download the dirvers from the manufacturer's website (e.g. dell, hp, compaq)

May 07, 2009 | IBM NetVista PC Desktop

1 Answer

PPPoE over Edimax BR-6104K without a modem


I am not sure if I understand you well.

You say:
My Internet is a PPPoE broadband connection but I don't have a modem installed.

What do you mean ?
You have a Broadband/ADSL modem, but you didn't install any software for it ?
(It is probably not necessary.)

So, I assume you do have a modem. You connect your modem to the wall outlet with a telephone cable.
Then then modem is connected with LAN cable to one of your PC with two NICs, you make Internet Connection Sharing, and ten from the second NIC of that PC, you connect (again) with LAN cable, your second PC.

If it is an ADSL or Cable modem connected with LAN cable, please follow this steps.

First RESET your Edimax router and disconnect all LAN cables if connected.

Connect your PC (the one with one NIC) to one of the 4 LAN ports of your Router wit a LAN cable.

Open My Network Places and then View network connections, or go to Control Panel and open Network Connections.

Right-Click on your LAN adapter and choose Properties, then double-click on Internet Protocol (TCP/IP)

Set to 'Obtain IP address automatically' and 'Obtain DNS server addres automatically' (click OK). Now you are back to the previous window. Click and check (if it is not) 'Show icon notification when connected' and once again click OK.

After a fiew seconds you should get (near to the clock in the the right bottom of your desktop), a Network icon and a baloon message that your NIC is connected.

Right-click on the network icon and click STATUS, a window will open
and then click on SUPPORT tab.
You should see:
IP Addres: 192.168.2.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1

Open your browser and type http://192.168.2.1

Now login as:
admin (default)
and password is: 1234 (default)

Click on GENERAL SETUP on Top-Left, and then on WAN (on the right side) and choose
PPPoE.
Click on 'More configuration'
Type your User Name and Password you have from your ISP.

Now Click on APLY, and again APLY !

The Router will restart in 30 Sec, and your NIC will reconnect.

Now connect your Modem to a WAN port of your Router with LAN cable. (***)

Now:
if you've typed your User Name and Password correctly in PPPoE fields,
and
if everything is OK with the service from your provider,

you should now be on Internet.

If not, then please check your User Name and Password with your Internet Service Provider, and ask them if they can see your router.

Now, get to the PC with two NICs.

Go to Control Pannel, and go to Network Connections.
Right-click on one of your NICs and click 'Disable'.
Check the other NIC if 'Internet Protocol (TCP/IP)' settings are set to Obtain IP addres and DNS - Automatically, and 'Show icon notification when connected' and once again click OK.

Connect the (enabled) NIC with LAN cable to another port of your router.

The second PC should be on Internet, too.


If you (somehow) realy don't have a modem, but you have a cable only, follow the above instructions to the point (***) and connect the cable to the WAN port of your router.

That's it!

Regards

Aug 28, 2008 | Edimax BR-6104K Router (br6104k)

1 Answer

Lost internet on my desktop which uses wireless lan card and antenna to connect to linksys wireless g


Just a question, did your girlfriend accidentally kick your computer off the network by accident?

Mar 23, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Can't set up wireless connection


  1. Check in your system: Click Control Panel, then double click System. On the Hardware tab click Device Manager. Click the (+) sign besides the Network Adapter. See if the Packard bell wireless adaptor is there. If its is not there, right click the Network Adapter and click Scan for hardware changes, and reinstall the network adapter.
  2. If the Packard bell network adapter is already there, click Start and click My Network Places. On the left side of the Network Connection, click View Network Adapter. The wireless network adapter should be there. Right click the wireless network adapter and choose properties. Give check mark on Show icon in notification area when connected (to show you if there is wireless notification), and give check mark to Notify me when this connection has limited or no connectivity (to show if the wireless network is disconnected). and click OK
  3. Turn on the orange broadband livebox. And right click the the wireless network connection (on Network Connection) and choose View Available Wireless Networks. And the click the Orange broadband Livebox to use this wireless Network connection.
I hope this solution is helpful to solve your problems

Best Regards
Blackrobin

Nov 16, 2007 | Computers & Internet

2 Answers

Can not get on internet


Which are you using, wireless internet or wired?

If your using wireless then:
Goto Control Panels via start menu
Double Click on network Connections
Right Click the LAN and choose Properties
On the bottom you see the "Show icon notification ..." make sure that is unchecked.

Close out and your good. no more notification.

Nov 12, 2007 | Acer Aspire 5100 Notebook

Not finding what you are looking for?
Intel CELERON 2.66Ghz CPU AND MOTHER BOARD (CPU4266CEL) Motherboard Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...