Question about Panasonic Televison & Video

2 Answers

"Self Check Did Not Complete" keeps coming up on my DVD Player (DMR-ES35V) & then when I press "enter" It switches off to standby & then when I press "power" it keeps trying to check disc & then comes up with same message & I can't use unit at all. Please help.....

Posted by on

  • tanjo May 28, 2010

    Because I've changed the disc so many times I'm not sure which one was originally in there & I've got DVD-RW & DVD+RW I've tried a few & still doesn't seem to fix it. Getting very Frusterated & I can't find my manual......

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

This is a PCB board failure

DVD Disk Drive Control Board (Part No. VEP79132). Panasonic will not sell this individual part but packages it a module, called the RAM/Digital PCB Module (Part No. RFKNES15P)."

If you change this then it will be fixed.

Thanks for using FIXYA

Posted on May 28, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

It's actually a really simple fix. It occurs when there is a corruption in the disc which causes the recording mechanism to malfunction. There is a separate error message for this, however it is usually not detected until it's too late. When the recorder asks you to carry out the recovery process, do it. When the disc ejects, make sure you take the disc out that was in there when it occurred and throw it away...it will keep happening because the disc is permanently corrupted. However, do not close the tray without a disc or the self-check will fail. Instead pop in a disc of the same format that the error occurred in (if it was DVD+RW then put in a DVD+RW). It resolves the problem every time on the first try. (It only happened two times in a year and a half for me). As the manual says the unit is "NOT BROKEN".

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 27, 2010

  • tanjo May 28, 2010

    Because I've changed the disc so many times I'm not sure which one was originally in there & I've got DVD-RW & DVD+RW I've tried a few & still doesn't seem to fix it. Getting very Frusterated & I can't find my manual......

  • taran_2005
    taran_2005 May 28, 2010

    Thanks for your response!!

    Regarding Manual, Download it from :-

    http://www.panasonic.ae/EN/Manuals/DMR-E...

    Let me know,if needed further assistance.

    Hope i helped you.

    Thanks
    for using ' Fixya ' and have a nice day!!


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dmr-es35v can't read any kind of dvd. what can be wrong?


Laser pickup unit fault. Check and replace it. Contact any service technician. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Feb 18, 2017 | Panasonic DMR-ES35V Multisystem Code free...

3 Answers

Pansonic DMR-EH55 DVD Recorder,


You need to reinstall software on your dvd

Apr 01, 2008 | Panasonic DMR-EH55 DVD Recorder/HDD...

1 Answer

How do I play regional dvd's that the player is not tuned to. I have been trying to find a code but I am struggling. Can you help me?


Hi
You need to follow these instructions.


To unlock the Region Code on a Panasonic DMR EZ48 using a One for All - URC 7040



1. Switch on the player (make sure the drive select is DVD).
2. Select DVD on the URC.
3. Hold the magic button on the URC until the DVD button on the URC blinks twice
4. Enter device code 0490 on the URC, (DVD button blinks twice), URC takes control of the Player.

Point the URC at the Player and program the URC buttons using the following procedure:

1. Hold magic button until the DVD button on the URC blinks twice
2. Press 994 (DVD button blinks twice)
3. Briefly press magic.
4. Enter 4 digit code 1911 (DVD button on URC blinks twice)
5. Repeat steps 1, 2 & 3
6. Enter 4 digit code 1202 (DVD button on URC blinks twice)
7. Repeat steps 1, 2 & 3
8. Enter 4 digit code 0653 (DVD button on URC blinks twice)
9. Repeat steps 1, 2 & 3
10. Enter 4 digit code 1804 (DVD button on URC blinks twice)
11. Repeat steps 1, 2 & 3
12. Enter 4 digit code 1435 (DVD button on URC blinks twice)
13. Repeat steps 1, 2 & 3
14. Enter 4 digit code 1556 (DVD button on URC blinks twice)
15. Repeat steps 1, 2 & 3
16. Enter 4 digit code 1227 (DVD button on URC blinks twice)
17. Repeat steps 1, 2 & 3
18. Enter 4 digit code 1178 (DVD button on URC blinks twice)
19. Repeat steps 1, 2 & 3
20. Enter 4 digit code 1299 (DVD button on URC blinks twice)
21. Repeat steps 1, 2 & 3
22. Enter 4 digit code 1230 (DVD button on URC blinks twice)

23. Press the One For All URC buttons in the following sequence

1, 2, 3, 4, 5, 6, 7, 8, 9, THEN hold down 0 until "HELLO" appears in the display;

After about 1 minute the Player comes back to life as Multi Region.



--

-


Please dont forget to vote if you liked my answer


thanks

------




Feb 13, 2011 | Panasonic DMR-EZ48 DVD Recorder

1 Answer

My panasonic dmr ez28 keeps coming up with 'self check did not complete' 1) press OK or 2) Press power to restart. I have tried both but the unit then freezes. Can anyone suggest what next?


The Self Check procedure is like the POST on a computer: upon starting the processor makes a simple test of all the hardware components. If it fails then the defect is very important : a critical part situated on the mainboard has failed and it stops the loading of the firmware . Since all parts are glued then the mainboard will have to be replaced. This will be so expensive that it's going to be cheaper to just buy a new recorder.

Dec 02, 2010 | Panasonic DMR-EZ28K DVD Recorder

1 Answer

Panasonic DMR-EZ47V DVD Recorder / VCR Combo RC1 errior message how do I fix this problem


http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/DVD-Recorders/model.DMR-EZ47VK
http://www.retrevo.com/support/Panasonic-DMR-EZ47-DVD-Players-manual/id/2811ag420/t/2/
To get into Service Mode, first put the machine in STANDBY mode, then press the buttons ChUp OPEN/CLOSE and REC all at the same time on the front panel (Ch Up is hidden inside the AV3 input flap). Eventually the front panel display will show "SERV" (after its "HELLO" messages). Anyway, pressing [6] then [5] on the Remote Control tells me that I have an Error Code of "04" which is a Digital PCB or Communication Error (whereas an Error code of "02" means a "Defect of RAM drive"). (To exit from Service Mode, press [0] then [0] which should get you back to "SERV" and then POWER-OFF the machine).

Hopefully, your manual will display your error codes.

Perhaps the remote control is not set to the same control code as your DMR-ES40V. Codes may be set to 1, 2, or 3 on the remote by holding down the enter button and one of those number buttons for several seconds at the same time. The factory default is code 1. Try 1 first. If that doesn't work try 2. If that doesn't work try 3. If one of those codes doesn't work you may have a bad remote or a bad sensor on your machine. On DMR-ES35V models the sensor is located just to the right of center behind the black window

Jun 23, 2010 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

WHEN I TRY TO USE MY REMOTE CONTROL ON MY PANASONIC VCR/DVD COMBO MODEL #DMR ES35V, THE DISPLAY SHOWS U30 1 AND WON'T WORK THE VCR/DVD. CAN YOU HELP ME?


I called tech support and their answer was simple!

Error Code U30 1.......the fix, press and hold the number one (1) on your remote and at the same time press and hold the ENTER button for 10 seconds while pointing the remote at the units sensor.

Automatically, my unit returned to normal and all my buttons on my remote returned to operational mode!

So, it was confirmed by Vincent at Panasonics tech support, that error codes U30's are rare, but it's a system safety feature. If you were to come across an error U30 2, you would push and hold the number 2 while pressing and holding down the ENTER button....so on and so forth.

I hope this helps someone else out there!
Shelley

Oct 11, 2008 | Panasonic DMR-ES35VS

1 Answer

Panasonic dmr-es35v


Is the Remote Control sensor in direct fluorescent lamp light or other strong
sources of light?
Press unit POWER button down over 7 seconds. The POWER indicator goes
out. If the Power was On, the screen will also disappear. After 5 seconds, turn
Power On and operate unit normally. If the steps above do not restore normal
operation, disconnect then reconnect the AC plug and turn the power On.

If that does not work, Panasonic offers free tech support 6 days a week 1-800-211-7262 (pana).

Jul 29, 2008 | Panasonic DMR-ES35VS

3 Answers

IS MY DVD COMBO REGION FREE


Yes the Panasonic DMR-ES35V is a multi region player.

Jan 01, 2008 | Panasonic DVD-S35 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

The Knight
The Knight

Level 3 Expert

74468 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...