Question about Sharp XVZ200 Multimedia Projector

1 Answer

Resetting the lamp timer to zero

I replaced the lamp in my Sharp XVZ200U projector and when I plug it back in the red standby and red lamp light both come on and the projector doesn't power up when I press the on button. Therefore, I can't perform the remaining steps (input, undo, left, enter, and right) to reset the lamp timer to zero.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Some times the lamp cover switch is broken or not setby the cover ,this wil shut off power on button

Posted on Sep 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello i have a sharp projector model xv-z21000 my


mainboard is not work ,it need to be repaired
Have a good day!
We supply original projector parts: lamp, bulb, Lcd, Lens, DMD,

motherboard, powersupply ... with high quality and competitive price.
Jerry China
Tel: +86 131788 67858
E-mail: lampdeng@hotmail.com
Skype: lampdeng.com
YM: lampdeng@yahoo.com
http://facebook.com/lampdeng
http://www.lampdeng.com

Oct 14, 2013 | Sharp XV-Z21000 DLP Projector

1 Answer

I replaced the lamp on my XGC55X Sharp Projector and it worked great for 2 nights (roughly 6 hours). Now it goes to warm up, with the lamp light blinking, and will power down with the status button showing...


Have reset the lamp hours after installing the new lamp? If, not the projector has treated the new lamp as old lamp & refusing to light further. So, reset the lamp hours to zero. To reset the lamp timer do as follows. Plug the power cord into the AC socket of the projector. Switch ON the power of the socket. (not projector) While pressing simultaneously INPUT, ENTER & UNDO on the projector, press ON on the projector. "LAMP 100%" is displayed, indicating that the lamp timer is reset.
If this does not correct your problem then the problem lies in other area. Let me know so that further I can provide you solution. Above things are preliminary

Aug 06, 2011 | Sharp XG-C55X Multimedia Projector

2 Answers

I replaced the lamp on my sharp dt100 projector and now it will not turn on


Have reset the lamp hours after installing the new lamp? If, not the projector has treated the new lamp as old lamp & refusing to light further. So, reset the lamp hours to zero. To reset the lamp timer do as follows. Plug the power cord into the AC socket of the projector. Switch ON the power of the socket. (not projector) While pressing simultaneously MENU/HELP, ENTER & DOWN (button near MENU/HELP) on the projector, press STANDBY/ON on the projector. "LAMP 000H" is displayed, indicating that the lamp timer is reset. If this does not correct your problem then the problem lies in other area. Let me know so that further I can provide you solution. Above things are preliminary.

Aug 06, 2011 | Sharp Office Equipment & Supplies

1 Answer

Hı sharp xg xv2e lamp tımer reset?thanks


hi
Do the following for resetting the lamp hour

1.Attach the power cord to the projector and plug it into an electrical outlet.
2.Locate the buttons on the top of the projector and simultaneously hold down the "Enter", "Menu" and "down arrow" buttons, then press the "Standby/On" button. 3.Continue holding all four buttons depressed until the lamp indicator light begins flashing green.The counter is now reset. Zero hours will now be displayed on the screen.
ok

Feb 04, 2011 | Sharp Office Equipment & Supplies

1 Answer

Projector sharp XR-H325SA indicating lamp I replace tha new lamp but still indicating ineed to reset lamp timer but how?


hi,
for resetting the lamp hour do the following

1. Plug the power cord into the AC socket of the projector.
2. While simultaneously holding down MENU/HELP, ENTER and DOWN ARROW button on the projector, press STANDBY/ON on the projector.
3. "LAMP 0000H" is displayed, indicating that the lamp timer is reset.

ajin_g_25.gif
ok

Jan 24, 2011 | Sharp XR-10X Multimedia Projector

1 Answer

After a few seconds the lamp light began to blink red, its a panasonic pt-lb10svu, show no pic at all has a new lamp


Hi, Replacing the lamp in a Sharp LCD projector requires the lamp indicator to be reset. When the lamp needs to be replaced, the indicator becomes red. Resetting the counter for the lamp hours to zero will also reset the indicator to green.
  • Attach the power cord to the projector and plug it into an electrical outlet.
  • Step 2Locate the buttons on the top of the projector and simultaneously hold down the "Enter", "Menu" and "down arrow" buttons, then press the "Standby/On" button.
  • Step 3Continue holding all four buttons depressed until the lamp indicator light begins flashing green.The counter is now reset. Zero hours will now be displayed on the screen.
  • Aug 03, 2010 | Panasonic PT-LB10SVU Multimedia Projector

    1 Answer

    Recently I was using my xv-z90u, I started the projector up and turned it off right away and the bulb replacement lights started flashing and going into a standby mode(two red lights). So I replaced the...


    There is no problem here, the sharp projectors just do this until you enter the reset procedure. It comes on a sheet with your lamp. they differ from projector to projector. often involves hold down power and some arrows while plugging in the projector - that will reset the lamp timer and you will be away!

    Jan 14, 2010 | Sharp Projector lamp Projector Lamp

    2 Answers

    Optoma EP755 new lamp when power standby button


    you need to reset the lamp timer, usually done by holding some buttons while turning on

    Mar 10, 2009 | Optoma EP750 Multimedia Projector

    1 Answer

    Lamp replacement


    Hi traks137

    You will have to reset both the lamp and filter timer before it will change the status of this unit.

    Your user manual will have all the steps in it on how to do the required resetting.

    Thanks for using Fixya !

    May 21, 2008 | Sharp XR-11XC Multimedia Projector

    2 Answers

    Tech support for Sharp PG-B10S


    Reset The Lamp Timer.

    While simultaneously holding down (+ . >) and AUTO SYNC on the projector, Press ( I ) ON and ( - . < ) on the projector.

    "LAMP 0000H" is displayed, indicating that the lamp timer is reset.

    NOTE..... Make sure only to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp tp become damaged or explode...

    Sinista

    Apr 15, 2008 | Sharp Notevision PG-B10S Multimedia...

    Not finding what you are looking for?
    Sharp XVZ200 Multimedia Projector Logo

    Related Topics:

    150 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sharp Office Equipment & Supplies Experts

    Anthony Karuku

    Level 2 Expert

    255 Answers

    k24674

    Level 3 Expert

    7993 Answers

    CheckitRight
    CheckitRight

    Level 3 Expert

    1362 Answers

    Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...