Question about GPS

2 Answers

Instructions to re-set timer

I have a West Bend Electronic Timer (Cat. No. 40073) from West Bend Housewares (Model 0442?) and have misplaced the directions to re-set the clock. Can you help?
Thanks!
Bob V.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Press and hold down the "clock" button. After about 5 seconds the display will start blinking. Press the "hour" to set the correct hou, "minute" for minute. Once done, press the "clock" button once more.

Posted on Jan 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fixed by holding down the "clock" button until it blinked and then re-set it by advancing both the "hour" and "minute" buttons to the correct time, then pressing the "clock" button again. NOTE: I tried this method several times earlier and it did not work...which shows persistence pays off. Bob V.

Posted on Apr 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Neato is not on central time. When I set it for ie: 2:45 pm it comes on about 8 PM So I think it is on West coast time.


Is it a GPS or Vacuum cleaner ?

Not west coast. it is perhaps pointing to russia or japan.
depends on the model and firmware and of course the setting

Jul 27, 2016 | GPS

1 Answer

I have a Nuvi 250W and just downloaded new maps from Garmin (bought the online lifetime option). Now I only have the major routes on the display. I seem to have lost the minor roads? How must I fix...


First press tools, then settings and then maps. Press map info and the name of your map should be displayed with a tick beside it. If there's no tick press the map name and a tick will appear beside it. The map is now selected and should be ok.

If that doesn't solve the problem it may be because the map is locked. To unlock the map follow the instructions on http://www.garmin.com/garmin/cms/site/us/support/searchsupport and that should solve the problem.

The problem of east/west may be solved when the map is sorted out. If not change the voice. Press tools, settings, language and the voice name and select another voice. If there's not another english speaking voice you can connect your satnav to the computer and open webinstaller. When it finishes checking for software updates it will give you the option to download new voices. Tick the ones you want and then press next. They will be downloaded and then when you have disconnected from the pc go through the process of selecting a new voice again.

Aug 06, 2010 | Garmin nuvi 250W GPS Receiver

2 Answers

I have misplaced my instructions and wish to use my Tom Tom tomorrow. Can you help me prepare? juniemoons@aol.com


http://download.tomtom.com/open/manuals/one3rd/manual.htm Go to this URL and choose the language you want and the manual will download as a .pdf file.

Sep 19, 2009 | Tomtom ONE 3rd Edition GPS

4 Answers

Turn off garmin


I just find it unbelievable that there is no off button on this watch. I dont want to use it as an everyday watch..its too big and ugly for that.Also you have to remember to turn off the gps as it will drain the watch overnight.You have to switch the gps on every time you do a run. I simple on and off button is all that is needed.It is just a matter of turning it on when you go for a run and you are ready to go. Same with all 'latest ' products..they give you the improvement over the last model but give you a downside...which will probably be corrected on the next incarnation....very clever marketing.!

Feb 03, 2009 | Garmin Forerunner 405 Handheld GPS...

1 Answer

Screen is stuck


Did you try to remove the chip yet?, sometimes that helps, and re boots the system?

Failing that, try to remove the battery, to enable the unit to completely power-down. Then refit, and try again.

There is a reset function, but i am assuming you are unable to access that if the screen is frozen.

I have listed how to remove the battery on another post on here.

Good Luck

Jan 30, 2009 | Navman iCN 330 GPS Receiver

1 Answer

How do I get the Garmin Forerunner 405 into powersave mode?


It should go into power save mode on its own after a period of inactivity. Make sure your timer is stopped and your workout has been reset. If the timer is running, it senses activity and stays in normal operating mode.

I just solved another problem where a 405 would go into power save mode but would not stay there. After a minute, it would come out and go back to normal mode and quickly drain the battery as it went back and forth between the two. I installed a software update to get version 2.30 (mine came with 2.10) and that appears to have fixed the problem.

Go to Settings, System, About and check which version of the software you have.

Chris

Jul 02, 2008 | Garmin GPS

1 Answer

I need to go east and Garmin 350 sends me west


Hmmm, you can find the update details per model, or get a pc, connect the garmin via usb and run the downloaded webupdater, which will take care of all the figureing out for you! If it thinks you are on the wrong side of the road or heading the wrong way it will try to get you to a turning point or exit, or either you told the machine to avoid certain roads check the navigation settings (wrench/navigation/avoid) make sure all is unchecked. Maybe you got to give the garmin a bit of time to get a gps fix before you hit the road, so it has time to find out where in the hell it is.

Jun 10, 2008 | Garmin nuvi 350 GPS Receiver

2 Answers

Portable Navigation Device


no what u need to do is load the software disk that comes with it
and open up the instruction manual using adobe reader it will then tell u what to do the basic set up of it is easy to use

Nov 23, 2007 | GPS

Not finding what you are looking for?
GPS Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Will Halftowaite

Level 3 Expert

503 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...