Question about Sony KDL-32S3000 32 in. LCD Television

2 Answers

TV on Standby

Tv turns on than automatically goes into standby mode , turns off and than the standby red button blinks ;( Help

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

There is a Sony S3000 protect blinks table:TV on Standby - ebf219b.gif

Posted on May 28, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 28 Answers

Recently manufactured TV sets like LCDs are desinged to perform with an external receiver device once powered on. LCDs once powered on would display a logo as ready to recieve transmition, shortly without signals, the device should assume standby mode, or power saver mode, possible shut down without reception. Do not expect broken technicallities with new TVs. First, attempt to connect a transmitter device to the TV, for example, VCR PLayer, DVD player, or DIsh reeceiver system. The TV should recognise signals. Alternatively, attempt the TV setting functionality.

consult the TVs user guide for explanation diagnostics.
good luck

Posted on Jan 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung TV not turning ON. My email address is prk Please help... Much appreciated.


Its power supply I will tell you how to fix you need to get few things first

Jan 29, 2016 | Samsung Televison & Video

1 Answer

Daewoo TV problem


that is standby mode! maybe you have defective power supply in oscillation circuit! at hot side..

Oct 03, 2007 | Televison & Video

1 Answer

Hitachi l37v01ua won't turn on from standby mode.....HELP!!!!


when in stand-by mode then red light's blinking. Try to turn it on not from remote but by pushing a button on the set.

Apr 26, 2015 | Televison & Video

1 Answer

Sony TV turns off immediately after turning on


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits. Check this link to get more details about Sony Blinking codes.

Jan 13, 2013 | Sony FD Trinitron WEGA KV-20FS100 20" TV

1 Answer

TV won't turn on. flashes a series of 5 red lights instead of turning green


Usually Sony and LG Blinking Codes are the same. Here is what I have.
  • Unit is dead, No blinks - Problem in the standby power section. Might check fuse,
  • Continuous blink once a second, no pausing - No reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective.
  • One blink - not used for the self-diagnosis
  • Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.
  • Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit,
  • Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted.
  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. In addition, unit could be in IK blanking, try turning up screen slightly.
  • Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately.
  • Seven blinks - High voltage shutdown. The high voltage has exceeded 33k and the unit goes immediately into safety shutdown. Check power supply regulation and horizontal circuits.
  • Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code.
  • Nine blinks - Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing Make sure the regulator is -12 or -13 (negitive).
  • Ten blinks - Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" board. If the transistors are bad, check R8051 and IC8005, also on the "D" board.

Nov 26, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

How do you tune Sky+ remote into Sony KDL46W5710 Television


The Sky+ remote should automatically default to Sony TV's. Leave the batteries out for a few minutes and try again. The Code for Sony is 0000.
Or try this :-

With TV and sky box on.
Press the 'TV' button on the remote.
Hold down the 'select' and the 'red' button (of the four coloured buttons) together, until the red light on the remote blinks twice. (takes 2 seconds)
Press the 'TV' button again.
Now enter four zeros, the red light on the remote should blink twice.
Press the 'standby' button (top right).
If the TV turns off, then press 'select' and the light should blink twice again, job done.

If the TV does not turn off then press 'TV' followed by 'standby' again.
Alternate pressing 'TV' 'Standby' until the TV turns off.
When it does, finish by pressing 'Select.
Check the red light on the remote, if it blinks 3 times, then it has run out of options for 0000.


Dec 19, 2009 | Televison & Video

1 Answer

The tv turns off automatically & standby light blinks 4 times


4 blinks is bad backlight inverter. Download the service manual here:

http://rapidshare.com/files/208591107/KDL40S2000_L5_sm.pdf

Aug 22, 2009 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

2 Answers

I pressed the sleep button by accident and the pic and sound went off and the stand by/timer red light started blinking. what does it mean?


Depends on how many times it blinks,just count the blinks Example: if it blink 2 times then pauses and blink 5 times then the code would be 25 and so on

Once you have this code,please post it.

Jul 30, 2009 | Sony KV-32S40 32" TV

2 Answers

TV won't turn on, red lights blinks twice.


The blinks can tell you the problem , is it 4 blinks that could be 3 different ics IC1509 Q1505 or IC502

Aug 06, 2007 | Sony KV-32FS13 TV

Not finding what you are looking for?
Sony KDL-32S3000 32 in. LCD Television Logo

879 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...