Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

My spin cycle is real slow, when it does work it bangs loudly when openong door.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,430 Answers

This is usually caused by the motor coupler. This is very inexpensive and easy to replace. To watch a free video on how to check and replace this part go to http://appliancehelponline.com/topdirectdrivevideo.html this will walk you thru this. It may be a different model but the troubleshooting and replacement will be the same. You can also enter your model # for your specific model to get diagrams and illustrations. Not all models are available. All parts come with installation instructions.

Posted on May 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine makes loud knocking noise


drain or drain pipes blocked
bearings gone

Aug 18, 2014 | Washing Machines

1 Answer

Loud clunking, banging sound during the spin/drain cycle.


the make , model and year are missing but if it is a top loader unit , it indicates that the tub suspension bar motion absorbers have broken and need replacing

Sep 06, 2017 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Frigidare front load washer has loud banging on spin cycle. After much work we reallized one shock was broken of which we repaced both now it still making the loud banging shaking motion. Also the washer...


Thanks for choosing FixYa and welcome. Since the suspension is ok and it is level, check your drive motor and spin bearing. Usually, these are the trouble parts when loud noises are associated with the spinning cycle. Your drive motor controls the spinning. Since the noise is during spinning, that is probably where your problem lies.

Apr 29, 2011 | Frigidaire GLTF1670A Front Load Washer

1 Answer

On the spin cycle, it makes a banging noice, rythmic, about 2 per second....only on the spin cycle... can you help???


The spin cycle is used to rid the water by centrifugal force. As the tub spins, the water iis forced out of the clothes. The banging noise comes from the weight of clothes being on one side making the load unbalanced. The machine will absorb some minor unbalancing. If it gets real loud & the machine starts dancing, shut the machine off by raising the lid, when tub stops, rearrange clothes.
Louie Almond

Mar 27, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

FWT449GFS2 making loud banging noises during final spin cycle


lxr6232eqo making loud banging noises during final spin cycle

Aug 31, 2009 | Frigidaire Washing Machines

1 Answer

Loud banging when spinning


but a small load in . if happen then it sounds as if the bearings have gone at the back of the drum.

May 12, 2009 | Washing Machines

1 Answer

Washer spin cycle extreme vibration and loud bang when it stops


check the vibration damper rods for breakage - especially the mounts.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 17, 2009 | Kenmore Washing Machines

1 Answer

Kenmore 80 Series washing machine - loud banging at end of spin


With the lid open, set the cycle to spin and press the lid switch button with a pen. Wait until the drum gets to full speed and release the lid switch. If the drum makes a knocking/ thumping noise and doesn't stop spinning within 2-3 seconds, the basket drive block is worn and needs to be replaced. (The basket drive block is located on the gearcase drive shaft, under the tub and agitator) If this has been happening for a long time you may need to replace the brake and drive tube assembly as well.
5df3c5a.jpeg
Basket drive block part number is 389140

If that's not it, let me know and I will try to help you further.
Good luck!

Mar 10, 2009 | Kenmore Washing Machines

1 Answer

Frigidare front loader washer GLTF1040ASO


your bearings are shot your washer needs to be rebuilt but it is cheaper to buy a new washer

Dec 26, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2128 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...