Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Kodak 5300 printer has stopped being able to scan, although it detects documents for copying ok. Tried to recalibrate and printed calibration page, but when inserted in scanner, get message, "Calibration page not detected". Any suggestions?

Posted by on

  • gmac8511 Jun 01, 2010

    This may have helped, but it was finally resolved when I placed the calibration page on the opposite side of the scanner (away from the Arrow that they tell you to line up with), and it was discovered!

    Thanks

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Try to do a power recycle. if still not able to do scan then printer needs replacement. Call their technical support, and get it replaced for free if its in warranty

Posted on May 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer not printing photos with all colors


  1. Lift the printer access door, then remove the ink cartridges from the printhead.
  2. Verify that the label on the ink cartridges is intact, and that the cartridges are not damaged.
  3. Verify that the KODAK Ink Cartridges have not been refilled.
  4. Insert the ink cartridges into the printhead, then press down firmly until you hear them click into position.
  5. Close the printer access door.
  6. Check the printer status monitor on your computer (or the LCD screen on the printer) to determine if there is sufficient ink available for your print job.
  7. NOTE: Once the "Black ink cartridge is low" or "Color ink cartridge is low" message is displayed, print quality can be affected.
  8. Reprint the picture or document that had the quality problem
If still same quality then...
  1. Load inkjet paper into the paper tray.
  2. On the control panel, press Menu.
  3. Select Calibrate Printer.
  4. Select Print Calibration Page
  5. Press Start.
  6. When the print is complete, press Cancel to end the calibration process.
  7. Check the six color bars on the printed calibration sheet.
  8. 5000calsheet_color_bars.jpg
Are the color bars completely filled with solid color?


If no then:

  1. Press Menu.
  2. Select Clean Printhead, then press OK.
  3. Select Deep Clean, then press OK. The On/Off light flashes green during the cleaning procedure.
  4. When the On/Off light glows steady, press OK.
  5. Select Calibrate Printer.
  6. Select Print Calibration Page
  7. Press Start.
  8. When the print is complete, press Cancel to end the calibration process.
  9. When the print is complete, press Cancel to end the calibration process.
  10. Check the six color bars on the printed calibration sheet.
  11. 5000calsheet_color_bars.jpg
Are the color bars completely filled with solid color?

If again No...

then printhead needs replacement... call Technical Support to get it replaced




May 25, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

My KodakEasy Share 5300 will not print in black.


92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Nov 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My kodak easy share 5300 has printing issues. I


Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699
Thanks

Aug 29, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

I have had error codes 3610 and 3501 and 3502 since installing my Kodak 5300 and I can not calibrate my print cartridges as it can not detect the calibration alighnment page


call kodak @ 1800 421 6699 . this is a problem e cant fix ourselves. but dont worry its jst a problem with the software of kodak. printer is fine

Jul 02, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Blank page


sounds like dried cartridge

Mar 29, 2009 | Kodak EASYSHARE 5100 All-In-One Printer

1 Answer

Printin Problem


Call Kodak for a new printhead. The printheads go bad.

Dec 20, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer is not working correctly


dear mebe possible your cartridge is have low ink
coz your printer needs to clean up by serves

Dec 13, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My kodak easyshare5300 is printing black picture


Hi-

If your product is still within the warranty period from KOdak then you can call them up for some step by step troubleshooting to help you with your problem and as well they can replace the printer if defective.

Try this first

Calibrate your printer, then print a demo sheet.
  1. If paper is in the photo paper tray, remove it.
  2. Load photo paper into the photo tray.
    1. Fan the paper to keep the sheets from sticking together. IMPORTANT: Do not overload the photo tray.
    2. Load a maximum of 20 sheets into the photo tray, with the Kodak logo facing up.
    3. Engage the photo tray by pushing it in until it stops. p289_0006aa.jpg
  3. Calibrate your printer.
    1. Press Menu.
    2. Select Calibrate Printer, then press Start.
    3. Wait for your printer to print the calibration sheet.
    4. Place the calibration sheet face down on the scanner glass.
      • For the 5300 AiO printer, place the sheet on the front right corner of the scanner glass.
      • For the 5500 AiO printer, place the sheet on the left rear corner of the scanner glass.
    5. Press Start.
    6. Wait until "Calibration complete. Remove calibration page from scanner glass. Press OK to continue." appears on the LCD display.
    7. Remove the calibration sheet from the scanner glass, then press OK.
  4. Print a demo sheet.
    1. Disengage the photo tray by sliding it towards you until it stops. When the photo tray is disengaged, the main tray is active.
    2. Select Print Demo Page, then press Start.
    3. Wait for the demo sheet to print.

Then call them if issue Persist at these numbers:

In the U.S. and Canada: 1-800-421-6699
In Australia and New Zealand: 1800 793 895

Thanks for using Fixya!

Jun 21, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Owners manual for kodak 5300 printer


Halbert, you were disconnected from our chat session.

A manual for your printer can be found here at Kodak.com.

Apr 21, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5165 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...