Question about Canon imageRUNNER C3220 Color Copier

1 Answer

The rip on the copier is flashing FF and I am not able to print. What can I do to solve this problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Expert
  • 287 Answers

Hello. The FF is a hexadecimal number that means the rip did not boot properly.There are buttload of reasons why this my be but lets try this. Power off the copier and the Fiery emulator (rip).Power on the copier only and let it reach aready condition.Then energize the rip and watch the same display that showed the FF.It may take a minute or two as it goes thru its boot/diagnostics,but we hope you dont get the FF again.Now I am assuming that what we are talking about is a previously configured system that had been working fine until recently.If this is so,and the rip does not operate correctly after the directions I just gave then you probably need to re-load the rip's system software.

Posted on Jul 11, 2010

  • Amos Dennis
    Amos Dennis Mar 24, 2014

    I don't even know how to re-load the rip's system software, can show me how ?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you do a factory or hard reset?


Sounds like a faulty bluetooth card or main board.

May 22, 2014 | Datamax-ONeil microFlash 4te Direct...

1 Answer

Flashing E 5 but Ink cartriges are ok.


For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

Sep 23, 2009 | Office Equipment & Supplies

1 Answer

Kodak ESP3 installed 2 new cartridges black light


For that problem kindly try doing the ff:

* Re-seat the inks both color and black then try printing
* Re-seat the Printhead of the printer then print again
* if problem still persist call 1800 421 6699 and the technical rep will replace the printhead

Hope this will help

Thanks
Byron

Sep 22, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

Dell M5200n printer will not print web pages, it will print from adobe, black and white pictures, and text documents. When printing from web page the lcd display says 900 service RIP software. I have...


i would recomend you downloading a fix file from dell.com you need a rip repair file at little or no cost.if you are running vista, i would recomend you get a new printer

Feb 26, 2009 | Lexmark T644 Laser Printer

1 Answer

Button sequence for head test (to look for banding)


Turn the printer off.
Load a sheet of white laser paper.
Press and hold the "Power" & "Ready/FF" buttons at the same time.
Release the "Power" button, and keep pressing the Ready/FF" button.
Right after you release the "Power" button, count 4 seconds, and release the Ready/FF" button.
Immediately, press and release the "Ready/FF" button one last time.
The printer should start printing a series of letters, numbers, horizontal lines and a black solid bar at the bottom of the sheet.
Once this test page is completed, turn the printer off to stop the test.

Feb 06, 2009 | Alps MD 1300 Thermal Printer

1 Answer

HP Deskjet 6940 not printing after replacing ink cartridge


My HP Deskjet 6940 is not printing. The color (left) low ink light is dark and the black (right) low ink light is flashing. I replaced the black ink cartridge with a new one but the low ink light continues to flash. No tears/rips in the circuit strip and all the copper leads appear to be connected

Sep 29, 2008 | HP Deskjet 6940 InkJet Printer

1 Answer

Canon bjc 4000


Hello there try

1: Unplug Power Cord
2: Hold POWER and FF and Print Mode buttons
3: Plug in Power Cord
4: Release after the beeps

Aug 21, 2008 | Canon BJC 6000 InkJet Printer

2 Answers

Will not print test page or documents


  • Make sure the printer is turned off and the paper-release lever is pushed back to the single-sheet position. Raise the paper guide upright.
  • While holding down the LF/FF button, turn on the printer. The PAUSE light flashes.
  • Slide the left edge guide until it locks in place at the guide mark. Next, adjust the right edge guide to match the width of your paper.
  • Slide a sheet of paper down firmly between the edge guides until it meets resistance. The printer loads the sheet automatically.
  • Press the PAUSE button. The printer begins printing the self test.
  • To stop printing temporarily, press the PAUSE button.
  • To end the self test, make sure the printer is not printing. Press LF/FF to eject the sheet; then turn off the printer.

Jul 04, 2008 | Office Equipment & Supplies

1 Answer

Epson Lx300+ printing problem


hi
pls check printer test print

  1. switch off the printer .
  2. insert paper in printer
  3. hold the button ll/ff pressing .
  4. switch on the printer
if you get test print OK then. you need to be Reinstall Printer Drivers on your Pc

May 22, 2008 | Epson LX-300 Matrix Printer

Not finding what you are looking for?
Canon imageRUNNER C3220 Color Copier Logo

Related Topics:

1,094 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...