Question about Televison & Video

1 Answer

Pioneer pdp-5071pu. Has 6 blinks - Televison & Video

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

There are a couple of different things that could cause this problem, the first is the power supply, and the second the main board. Also either sustain or scan driver board can cause this problem. To know exactly what board is the cause, you need to have electronic repair experience, and test equipment. If you have this let me know and I will assist you in the troubleshooting of this tv. Otherwise you will need a repairman at this point. You can expect a bill of anywhere between $400-$700, this is a good average, however it could be more or less.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 27, 2010

  • m_brooks01 May 27, 2010

    I tested the power supply and the voltage was low. I wanted to make sure that this was the only problem though

  • m_brooks01 May 27, 2010

    Other than checking the voltage on the power supply, what should be my next step to make sure that thats my only problem?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect head phones to pioneer pdp 5071pu TV


This model has no headphone out put. In the rear panel there are two monitor audio outputs which could drive headphones, but I think the volume output to a possible monitor matches the tv loudspeaker output, and may not turn off the audio separately.

Mar 09, 2014 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

For the last 24 hrs, our 50 in plasma has had no picture,no sound, but yet a blue light blinks 12 times, pauses blinks 12 times,what does this mean


Pioneer has this to say about the issue:

"On the models listed below, Engineering has determined this to be part of the normal operation, if the unit will power on.
If the unit does not power on, service may be required on the set.
Please contact our Plasma support at 1-800-421-1625.""
Elite models:
PRO-940HD, PRO-1140HD, and PRO-1540HD
Pioneer models:
PDP-4270HD, PDP-5070HD, and PDP-6070HD

Good Luck

Thomas

Dec 02, 2013 | Pioneer Televison & Video

1 Answer

Pioneer PDP-5071PU red and blue light on no pic at all


According to you it is a memory card reader, they shouldn't have a picture on them.

Sep 24, 2013 | Pioneer ANP2167-A Memory Card Reader for...

1 Answer

Pioneer pdp 5071pu


You can get some information about your problem from service manual:
http://www.nodevice.com/manual/newmans/lcdtv/pdp-5070pupdf/get74015.html

Sep 24, 2013 | Televison & Video

1 Answer

Pioneer pdp 5071pu


It sounds that it is time to do a firmware update. If you wish to get more details, http://electronicshelponline.blogspot.com/ Check this link. Firmware update procedure to many brand TVs are given in detail with illustrations. Pull up older posts. If you want more assistance, be free to come by comments.

May 29, 2013 | Televison & Video

1 Answer

I have a Pioneer pdp-433 plasma with a media receiver pdp-ro3e. When switching it on it gave a loud pop and blew up a fuse in the meter cupboard. Now when switching it on it gives green light on receiver...


Alas, the powerblock has gone.

Common problem on this model.

Only solution is replacement powerblock.

Pioneer used to repair this for nothing even out of warranty (they did for me), but they may not be so willing now, as your tele must be at least 6 years old. Unfortunately, it will be cheaper to buy a new TV than to pay for a contractor to fix it.

Brian

Jul 13, 2009 | Pioneer PureVision PDP-4330HD 43 in....

1 Answer

PDP-427CMX powers on then the standby blinks 3 times


You could hang it over your bed as a work-around. ;-)

Sep 09, 2008 | Pioneer PDP-427CMX Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...