Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

I keep getting the "F" code book says electrical problem call service??

Posted by on

  • prneumann May 27, 2010

    WHIRLPOOL 9150 FRONT LOADER, f05 CODE

  • prneumann May 28, 2010

    thankyou! temp sensor was it, thNKS AGAIN

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Kindly Confirm the Make and Model of the Washer?

Is it Shows F? or something like F 26 and so on?

Let me know,so that we could Proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on May 27, 2010

  • 2 more comments 
  • prneumann May 27, 2010

    it gets all the way down to 5 minutes left and flashes the letter "F" 9150 series washer

  • taran_2005
    taran_2005 May 27, 2010

    Thanks for your response!!

    The letter "F" is just a partial fault code. When the washer detects a
    fault it will display the letter "F" and then a number or another letter
    after the letter "F". An example would be "FH", "F02", and "SUD" etc.
    Without knowing the completer error code I will not be able to provide a
    specific answer.

    Let me know,so that we could Proceed.

    Hope i helped you.

    Thanks
    for using ' Fixya ' and have a nice day!!




  • prneumann May 27, 2010

    9150 front loader, "F05" code

  • taran_2005
    taran_2005 May 27, 2010

    Thanks for your response!!

    If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, or the heating element circuit has failed, the F05 error code will be displayed.

    Potential Causes

    • Check the Water Temperature Sensor, Heating Element and Element Relay
    • Check connections to the Sensor, Heating Element and Relay

    Replace failed component.

    More often it is Faulty Temperature Sensor Fault.What you need to do is take the back off and look under the tub. There will be a black hose. In this is the sensor. It will have 2 red wires going to it. Check the wires are still there as when i come across F05 on these machines its always a broken wire going to the sensor there.

    Let me know,if needed further assistance.

    Hope i helped you.

    Thanks
    for using ' Fixya ' and have a nice day!!



×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Whirlpool Master
  • 75,051 Answers

F is a washer water fill code, it means the machine doesn't fill fast enough or the fill cycle exceeds the limit for filling in the programming of the computer control board, I don't know what water setting u have it set to but change it to either cold or hot depending on where is it is set now, unplug the machine for 5 minutes before you do this test to clear the computer, if the code doesn't come back on the opposite water temp setting then u may have a defective washer fill valve.

Posted on May 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I got a new battery and a new starter on my dodge grand caravan and my van gave me a code reading p0513 my key is not getting no signal and it's not starting my car I don't no what's the problem


The Internet, though, has a large number of web sites where
you can buy service manuals and schematics from bookstores,
publishers, and other collectors. Here is just a sampling of
what sites are out there:

Chilton Repair Manuals

http://www.chilton.cengage.com/

Haynes Publishing
Haynes auto manuals

http://www.haynes.com/

Factory Automanuals
http://www.factoryautomanuals.com/

Vintage Books
Vintage books com Rare used and out of print books

http://www.vintage-books.com/

AutoLit
http://www.autolit.com/home.htm

Jan 13, 2016 | Dodge Cars & Trucks

1 Answer

My salt water system keeps saying service and wont work even after i did everything the book has asked me to do


the book has not asked you to do any thing with the unit when it pertains to a service light. The book guides you through solutions only for codes
One of those pages tells you that service light is not for the consumer to fix or reset
Only codes are user fixable.
Call Intex and they will e-mail you a form fill it out and fax it back
you will have a new one at the door in days as long as you have a valid receipt and the unit is under 2 years old

Aug 29, 2010 | Intex Automatic Salt Water System for ...

1 Answer

I have a renault clio and my battery was changed by mechanic who said it work be okay my radio will not play it keeps asking for code 4 digits where do i find this code


if you are lucky, the previous owner may have written it down in the service book.otherwise you will need to get the radio code bypassed by a specialist.dealers do not keep codes,as users can change them....must be thousands of people wanting to know"what is the code"
supposed to deter thieves.....

Mar 29, 2010 | 2001 Ford Focus

1 Answer

Golf 1.6 1998 auto radio code needed. any chance?


the first owner may have written it down in the service book.if not, it is,because of its age,better to replace it with a radio/cd unit.inside cover of the service book is where it shoul be, a little sticker.dealers DO NOT KEEP CODES.

Mar 01, 2010 | 1998 Volkswagen Golf

1 Answer

A05 code


Indesit Error Messages and Error Codes Indesit Dishwashers
  • F10 - Fill or empty time out. Check that the hoses are not kinked, that the taps are on or whether the drain pump or hose is blocked.
  • F11 - Heater timed out. The heater has not reached the required level. Book a service engineer.
  • F20 - Temperature under range. Book a service engineer. .
  • F21 - Temperature over range. Book a service engineer.
Fault codes for Indesit LCD Dishwasher Models
  • A01 - Float switch operated - Book a service engineer.
  • A02 - Open/Short circuit heater relay - Book a service engineer.
  • A03 - Short circuit on thermistor - Book a service engineer.
  • A04 - Unable to reach or sense temperature within 70 minutes - Book service engineer.
  • A05 - Pressure switch has not been reset - Book a service engineer.
  • A07 - Open/Short circuit wash motor triac - Book a service engineer.
  • A08 - Open/Short circuit auxiliary wash motor triac - Book a service engineer.
  • A09 - Open/Short circuit with main wash traic - Book a service engineer.
  • A10 - Open/Short circuit fill valve traic - Book a service engineer.
  • A11 - Half load valve traic or alternating motor action - Book a service engineer.
  • A12 - Open circuit heater rely - Book a service engineer.
  • A13 - Open/Short circuit dispenser traic - Book a service engineer.
  • A14 - Drain hose too low causing syphoning. Check drain hose and re-adjust.
  • H20 - Check tap and pressure of incoming water.



_uacct = "UA-1207243-4";urchinTracker();

Sep 14, 2008 | Indesit 24 in. DE73 Evolution...

1 Answer

1989 Mazda 323 gtx BG


Two things...
You should follow the pin numbers and not the color code.
Second
Check online for a service manual from Japan or the USA for that car. We got many Mazda imports here and there should be a lot of books on Ebay that would have the electrical schematics for a 323 from the USA and Canada.
You are going to have to just buy a book and have it shipped to NZ.

Jun 20, 2008 | 1989 Mazda 323

2 Answers

Hotpoint FDW80( A10 Appears ondisplay half way through cycle)


here are the fault codes for your machine...

Fault codes for LCD Dishwasher Models
  • A01 - Float switch operated - Book a service engineer.
  • A02 - Open/Short circuit heater relay - Book a service engineer.
  • A03 - Short circuit on thermistor - Book a service engineer.
  • A04 - Unable to reach or sense temperature within 70 minutes - Book service engineer.
  • A05 - Pressure switch has not been reset - Book a service engineer.
  • A07 - Open/Short circuit wash motor triac - Book a service engineer.
  • A08 - Open/Short circuit auxiliary wash motor triac - Book a service engineer.
  • A09 - Open/Short circuit with main wash traic - Book a service engineer.
  • A10 - Open/Short circuit fill valve traic - Book a service engineer.
  • A11 - Half load valve traic or alternating motor action - Book a service engineer.
  • A12 - Open circuit heater rely - Book a service engineer.
  • A13 - Open/Short circuit dispenser traic - Book a service engineer.
  • A14 - Drain hose too low causing syphoning. Check drain hose and re-adjust.
  • H20 - Check tap and pressure of incoming water


  • Hope this helps?

    Jan 06, 2008 | Hotpoint 24 in. FDW60 Free-standing...

    Not finding what you are looking for?
    Whirlpool Duet GHW9150P Front Load Washer Logo

    Related Topics:

    32 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1456 Answers

    Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...