Question about Supersonic 5.1 CHANNL HOMETHEATR DVD System
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Protect mode will kicking whenever a fault is detected.
Causes that can start protect mode are:
Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.
Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.
Posted on May 04, 2009
Tips for a great answer:
Apr 25, 2015 | Sony Audio Players & Recorders
Jan 06, 2014 | Sony Audio Players & Recorders
Mar 27, 2012 | Sony DHC-FL7D System
I am looking to buy the FL5D or FL7D main unit. Anyone wants to sell?
Jun 17, 2011 | Sony DHC-FL7D System
May 21, 2011 | Sony DHC-MDX10 Shelf System
Apr 01, 2011 | Sony DHC-FL7D System
Generally speaking, an amp protects itself from heat, shorts and overloads by refusing to turn on or stay on.
Overloads can be from excessive periods of high output and shorts would be wiring issues or a speaker blowing up.
You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.
If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.
If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced hands-on tech.
Feb 08, 2011 | Sony DHC-FL7D System
Jan 11, 2011 | Sony DHC-FL7D System
May 16, 2010 | Sony DHC-FL7D System
Apr 02, 2010 | Sony DHC-FL7D System
168 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: