Question about Linksys EtherFast PrintServer Print Server

1 Answer

Windows XP - Cannot access user name or adminstrator name to log in

Netflix made an adjustment to the profile so that I can view their movies on my PC. After they did this (can't remember what it was), whenever I would boot up my PC the Windows XP would ask for administrator password, I never had that before and of course did not have my password. I went into the same profile and deselected the Administrator, now, whenever I boot up the PC, it asks for me to click on user and there is no users to click on. How can I get back to not requiring a password to get to my desktop?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 84 Answers

Have You Lost Your Windows Admin Password?

Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess who’s going to have to help reinstall all the programs lost after a wipe?) But all hope is not lost. There are a few ways to actually retrieve a lost Windows account password. Read on, and we’ll show you the light.

1st Method:
The first thing which you check if you forget login password. When we install Windows, it automatically creates an account "Administrator" and sets its password to blank. So if you have forget your user account password then try this:
Start system and when you see Windows Welcome screen / Login screen, press <ctrl>+<alt>+<del> keys twice and it'll show Classic Login box. Now type "Administrator" (without quotes) in Username and leave Password field blank. Now press Enter and you should be able to log in Windows.
Now you can reset your account password from "Control Panel -> User Accounts".
Same thing can be done using Safe Mode. In Safe Mode Windows will show this in-built Administrator account in Login screen.

2th Method:
There are a lot of Windows password revealers and crackers available, but we’ve found that Windows Password Recovery Tool is the most effective.:
Windows Password Recovery Tool is one of the easiest password recovery tools to use. It allows you to reset a user account password, including the Administrator password. It is also a relatively small download.
Windows Password Recovery Tool Service: http://www.windowspasswordsrecovery.com

Posted on Apr 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install the TL-WPS510U on Windows 7 using the Netgear DGN2200 wireless modem/router as the access point? Need detailed instructions.


Hello,
You can find detailed instructions with pictures and text on how to install this in the quick installation guide found on the manufacture website. Here is a link to it: TL-WPS510U Quick Installation Guide V2
You can also find instructions in the full user guide: TL-WPS510U User Guide V1
And here is the setup wizard for 32bit windows: PSWizard LPR and 64bit windows:PrintServer_Setup_Wizard
The instructions for windows Vista are what you will look at for windows 7.
Regards, Chris

Sep 01, 2011 | TP-LINK TLWPS510U Print Server

1 Answer

Hello. I have a new Windows 7 machine and cannot figure out how to connect the dp-311p print server to it. The old directions for Windows XP don't seem to work. Help, please?


The wireless printer is somewhere on your "local network".

Access "Control Panel", and access "Printers".
Click "Add Networked Printer", and "browse" your local network to locate the print-server.

Tell us any error-messages that you get, if any.

Feb 05, 2011 | D-Link Air DP-311P Print Server

2 Answers

Iogear print server not compatible with windows 7


Not compatible or not working well with windows 7?

Maybe, It doesn't work because the driver/application you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer/application first, then choose "troubleshoot compatibility". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D rate and vote for me:)) julyallan01_52.jpg

Oct 22, 2010 | IOGear GPSU21 Print Server

1 Answer

Is wps54g wireless print router compatible with windows 7: how do I get it installed


Contrary to the on-line advice that I have found, the Linksys wireless print server WPS54G is compatible with Windows 7. It is the installation program that is not compatible. While not as bad as the early days of setting hardware dip switches, the print server must be installed manually. Following are the many steps that I took to install my WPS54G to work with Windows 7; lengthy, but worth it.


1. Connect your printer to the PC using a USB cable and USB port. Allow the printer to install. Print a test page. Even though you just installed the printer, check for an updated printer driver at the manufacturer's website. I did this late in the process before I could get the printer to work. It installed an HP universal driver.

2. Set the printer as the default.

3. If you do not know the IP address of your print server, access the router using your browser. See your manual for instructions. For a Linksys, type the default IP router address 192.168.1.1 into the browser address bar. If you have done this in the past, set up your router security. The default user name is left blank and the default password is admin.

4. Connect your print server to the PC using a USB cable and USB port.

5. On the router locate the DHCP Client Table and determine the IP address of the print server. You might have to refresh the table. The default is probably 192.168.1.78.

6. Access the print server using your browser and the IP address of the print server. The default user name is left blank and the default password is admin. Set up security to match the router, SSID, password, type of encryption, etc.

7. Go to "Devices and Printers" (from the start menu), on the default printer icon that you just installed, right click and open "Printer Properties." Click on the "Ports" tab.

8. Click on "Add Port." Select "Standard TCP/IP Port" and click on "New Port." Click "Next." Add the IP address of the print server (probably 192, 168.1.78) and call the port whatever you want. Click "Next."

9. After the port configures and you get the "Port Settings" tab (you can also get there by clicking on "Configure Port), change the protocol to "LPR" and click "LPS byte counting enabled." Use "p1" or P2" etc. for the "queue name."

10. Disconnect the print server from the USB port and let it sit for 30 seconds.

11. Disconnect the printer from the USB port.

Apr 06, 2010 | Linksys Wireless-G WPS54G Print Server

1 Answer

How do I assign a DNS host name?-


Hello,

NOTE: by clicking on the link below (you) the user agrees that jasahasch is not responsible for any negitive action incured from the use of requested information. Therefore cannot be held responsible for any negitive action resulting from viewing this video or using the information contained in the suggested video. This video may contain abusive lanuage and be found offense to some users. It is with the intent to help with questions, the views in the video are not endorse or support any viewpoint of jasahasch who holds the maker of this video soley responsible for the creators own opinion on the subject matter as to proper technic and proceedures.




Aug 12, 2009 | Troy XJet 3000 (XJET3000-8S) Print Server

1 Answer

Can not install


Chapter 3 - Configuration
This section will show you how to configure your new D-Link wireless print server using the web-based configuration
utility.
Web-based Configuration Utility
The IP address of your print server will be automatically assigned by your router.
To access the print server’s web-based configuration interface:
Windows® XP users:
Double-click on the My Network Places icon on your desktop. Your print server will be displayed as “DPR-1260:
dlinkps-xxxxxx” (where xxxxxx is the last 6 characters of your print server’s MAC address). If you do not see the print
server or have UPnP enabled, please refer to page 13.
Windows® 2000 users:
You will need to write down the MAC address located on the bottom of the print server (E.G. 00-54-23-45-f5-b6). Open
a web browser and enter the following:
http://dlinkps-XXXXXX
XXXXXX = the last six characters of your MAC address.
Note: Some printer software features may not work
while connected to the print server such as ink level display.

This will prove the print server is working. If you can not access the web interface then it may not be getting an address from the router

May 22, 2009 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

NetGear PS121 Print Server Problem


Here are some troubleshooting steps that I suggest you try:

1. Check physical connections.

a. Connect the modem to the Internet port of the router. The Internet “i” LED on the front of the router should light up.
b. Connect the computer to one of the four LAN ports (i.e port 1, 2, 3 or 4) on the back of the router. The corresponding port light where you connected the computer should be lit up.

2. Access the router's web-based utility.

a. Please open any web browser like Internet Explorer or Netscape Navigator.
b. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
c. A window will prompt for a user name and password. By default, the user name is "admin" and the password is "password".

Note: If you were unable to access the router's web-based utility, you may reset the router to restore the settings to factory default.

To reset the router:

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then plug it back in.

3. Configure the router.

If your Internet Service Provider is using a cable connection, please follow the steps below:

a. Click on Basic Settings under Setup tab.
b. Select No for Does Your Internet Connection Require A Login?.
c. Scroll down on the center page and look for the Router MAC Address section. Set it to Use computer MAC address and click on the Apply button.

If your Internet Service Provider is using a DSL connection, please follow the steps below:

a. Click on Basic Settings.
b. Select Yes for Does Your Internet Connection Require A Login?.
c. Select Other on the Internet Service Provider drop down box.
d. Enter your ISP's username (username@ISPdomain) and password. Then, click on Apply.

4. Configure the wireless settings.

a. Click on the Wireless Settings under Setup.
b. Change the SSID to any unique name.
c. Scroll down, look for the Security Options settings and select WEP (Wired Equivalent Privacy).
d. Set the Authentication type to "Automatic" and the Encryption Strength to "64bit".
e. Leave the Passphrase field blank, select Key 1 and enter a 10-digit number.

Note: The 10-digit number you typed in the key 1 will be the password or network key for the wireless connection.

f. Click Apply button to save the changes.
g. Go to Router Status under Maintenance tab and check if there is an IP address under Internet port. If it's 0.0.0.0, do a power cycle.

5. Power cycle.

a. Power off the modem, router and computers.
b. Turn on the power of the modem first and wait for it to initialize, the lights to stop blinking.
c. Power back the router and the computers. Check if it will be able to get online.

If you have wireless computers, you can connect them wireless to the router. Kindly follow the instructions below:

6. Connect wireless computer to the router.

If you are using Windows XP with Service Pack 1, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Advanced tab.
d. Please delete all the preferred networks then click on OK.
e. Right click on the Wireless icon again and click on View Available Wireless Network. Please select your network and click on Connect. It will ask you for the network key.
f. Please type in the network key and then confirm it. Network key is the password you type on the key 1 of the wireless settings of the router.
g. Make sure not to enable IEEE and then click on Connect.

If you are using Windows XP with Service Pack 2, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Change Advanced Settings.
d. Click on the Wireless Networks tab remove all the preferred networks then click on OK.
e. Right click on the Wireless icon then click on View Available Wireless Networks.
f. Select your network and click on Connect.
g. It will ask you for the network key. Type in the network key and confirm it. Then click on Connect. Network key is the password you type on the key 1 of the wireless settings of the router.

If you are using Windows Vista, please follow the steps below:

a. Click Start then select Connect To.
b. Connect to a network window will show up.
c. Select your wireless network and click Connect.
d. It will ask you for a network key. Type in the network key and confirm it. Then click on Connect.

From the above configuration, please check if you can now access the Internet.

For the print server setup, please follow the steps below:

Note: Before setting up the print server, make sure that you can print when printer is connected directly to the computer.

1. Wire the print server to router. Check the lights on it. It should have the ACT light on and the Error light off.

2. One way to test if the printer would work with the print server is to reset the print server for 3 to 5 seconds while it is powered on and after you release the button, the printer should automatically print the IP address of the print server.

Note: If the printer did not print, there is a possibility that they are not compatible. However, you may still continue to try to set up the print server.

3. Install the PS121 software.

a. Power on your computer, let the operating system boot up completely, and log in as needed.
b. Insert the Resource CD for the PS121 into your CD-ROM drive. The CD main page shown at the right will load.
c. Click Install Software.
d. Click Next and follow the software installation utility prompts to complete the software installation.
e. When prompted, restart your computer to complete the installation.
f. When your computer restarts, click Finish to run the Print Server Setup Wizard.

4. Run the Print Server Setup Wizard to Set Up a Fixed IP Address for the PS121.

a. The Print Server Setup Wizard screen should be displayed.
b. Click Next to proceed. The Print Server Wizard will now search your network for the PS121. If the Print Server Setup Wizard cannot find your PS121, check the network connections and status lights on the PS121.
c. The “Server Name” and the “IP Address” your network assigned to the PS121 are displayed. Click Next to proceed to the device name screen.
d. You can enter a descriptive Device Name and Domain Name or accept the defaults. Click Next to proceed to the IP Address configuration screen. The Print Server Wizard displays a recommended static IP address setting for the PS121. This is usually fine.
e. Click Next to proceed.
f. Click Finish to exit the Print Server Setup Wizard. This completes the configuration of the PS121 for operation on your network.
g. Click Yes to run the Add Printer Port Wizard. Follow the instructions in the next section for using the this wizard to set up each computer to use the PS121.

To set up each computer to use the PS121, please follow the instructions below:

1. Use the NETGEAR Add Printer Wizard to set up each PC to use the PS121.
a. When the Print Server Setup Wizard finishes, you are prompted to run the Add Printer Port Wizard. Click Yes to proceed. Alternatively, from the Windows Start menu NETGEAR Print Server program group, you can run the NETGEAR Add Printer Wizard.
b. After a short delay while the software searches the network for your PS121, the Printer Select window opens and displays the PS121 you have set up.
c. Click Next to proceed to the Port/Printer name screen. Take note of the printer model number listed.

2. Set up the correct printer driver for the printer port.
a. Click Next to proceed to the Port/Printer name screen. Take note of the printer model number listed.
b. Click Next to proceed to the Select Printer screen. If you see the exact printer model number listed as the printer model number from in the previous screen, click it to select it from the list.
c. If prompted, print a test page to verify operation of the printer and the PS121. Then, close any remaining Add Printer Port Wizard or Windows Add Printer Wizard windows.

Use the NETGEAR PS121 Mini Print Server Resource CD to run the Add Printer Port Wizard to set up each PC on you network that you want to use with the PS121. Select the port you added

You may also use the links below as your guide to troubleshoot the print server:

http://kbserver.netgear.com/kb_web_files/n101269.asp

http://kbserver.netgear.com/kb_web_files/n100033.asp

However, if this does not resolve the issue we will need to get some additional details from you to be able to assist you further. I have summarized my questions below:

1. Model number of router
2. Model of printer
3. Operating system of computer/s


Apr 26, 2008 | NetGear PS121 Print Server

1 Answer

Sharing a printer between a Vista Home Premium and XP Media Center Computer


Hi cavman6

(01) Is the Vista computer able to access ANY shared resources at all on the XP machine?

(02) Are you running any firewall software (other than the firewall built into the operating system) on either computer?

(03) If you are, please, let us know which firewall software it is and, for now, please, disable it.

(04) Do both these computers have Internet access? (I'm assuming they do but I do need to ask.)

(05) Is the printer currently ONLINE and working properly w/ the XP machine?

IF YOU HAVEN'T DONE SO ALREADY, PLEASE, DO THE FOLLOWING:

(06) Assign *both* computers to the same network WORKGROUP.

(07) Ensure that file and print sharing are enabled on the XP machine. If you'd like, do so on the Vista system, too.
(A) How to on Windows XP
(B) How to on Windows Vista

(08) "Share" the printer on the XP machine (in printer properties).

(09) Can each computer now see itself AND the other computer on the network?

(10) Have you added your user name and password that you're using on the Vista system to the users list on the XP system?

(11) If you haven't done so already, please, do this. The user name should have a password associated w/ it. So, if you aren't using a password on your Vista system profile, assign one then add that user's credentials to the users list on the XP system.

Please, post back here w/ what you've tried and the results, your observations and any other comments or questions.

Thank you
BJ @:)


Apr 15, 2008 | Extended Systems Printer Sharing...

1 Answer

I can not get two print servers to work on my network


I would suggest that you set a higher Ip address then 9-10 as it is possible that your router/switch is possibly using one of these for DHCP, I have one of these myself, I had to put mine a little uprange to prevent my router / switch from interfering with it.

Jul 26, 2007 | D-Link DP 301U (DP-301U) Print Server

Not finding what you are looking for?
Linksys EtherFast PrintServer Print Server Logo

745 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Print Servers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

Are you a Linksys Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...