Question about Samsung HL-R4667W Rear Projection Television

1 Answer

Why won't my Samsung HL-R4667W DLP tv turn on?

It was working literally 2 minutes ago until I accidentally unplugged it whilst trying to plug in an xbox. When turning it on, the lamp light will flash, and about 3 seconds later, the lamp will come on. Then, for a seemingly random amount of time, the lamp will stay on until it turns itself off. (anywhere from 10-45 seconds). PLEASE HELP! Thank you.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Theres a cover on the back that is vented w/4 screws on like the corners,also theres a symbol that looks like a "T" on it,take that cover off and right behind the symbol "T" an arm like plastic piece is what hits a lever inside when then cover is installed ,flip that little blue lever up and down a couple of times with the set unplugged reinstall cover making sure the "T" is in the position to hit the lever and tighten not too tight.
if this don't work it may be your colorwheel.Good Luck!

Posted on May 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green vertical lines,minor. flashing goodback ground pic good sound . i have samsung dlp tv model hl-r4667w


the lines are from the vertical control, theres a minor short on the vertical board if not fixed the power supply will short and whole tv will go green call repair shop and get short fixed

Jun 11, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP 56" tv,distorted picture


if you say that your picture gets distorted you mean like it moves to a side? do you see a black middle block?

if it's a yes?

so its probably the light engine. you need to change it!

does it looks like this?94b37fe.jpg



try this link.. http://www.discount-merchant.com/1069179-HL-N5067W-p/1069179.htm

the price is more or less depends on your TV model... $279.00



Feb 02, 2010 | Samsung DLP HL-P5663W 56" TV

2 Answers

MY Samsung DLP Shuts off after 2 minutes than if I unplug it, it will come back on for 2 more minutes and than go out again. Could it be the Bulb and Ballast failing. I just replaced the bulb a few weeks...


try this..

On the bottom left corner there is a blue switch that detects if the lamp door is properly installed, if you try to turn your TV on without it won’t turn on.

8b560eb.jpg

Jan 31, 2010 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung DLP turns on and off - cycle repeats


make sure put the lamp door back before trying to turn it on because they have switches on them that allow the tv to turn on. If that is ok you probably have a bad ballast.
Call a local tv repair shop to further diagnose the problem.

Dec 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Picture wont come on, makes noise like it is on, but no go


when u plug the set in does it make a whinning noise or a poping noise. this might be a lamp or a color wheel stalled.

Jun 16, 2009 | Samsung HL-R4667W Rear Projection...

1 Answer

Samsung DLP


First try a "hard rest" , unplug tv for 5 minutes then plug it back in when you go to turn it on hold the power button in for a minute or until you hear a beep , if that doesn't work , could several things , let me know if the hard reset works first.

Robby

Apr 17, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Bightness Change


It sounds like your lamp is going bad. The lamp part number is listed as "lamp code" on a sticker located on the left side of the set. Use this number to grab a replacement off ebay.

Dec 20, 2007 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?

Open Questions:

See all Samsung HL-R4667W Rear Projection Television Questions

Samsung HL-R4667W Rear Projection Television Logo

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...