Question about Whirlpool 24 in. GU2548XTP Built-in Dishwasher

1 Answer

My dishwasher blinks the green clean light

My dishwasher blinks the green clean light constantly and will not let me cancel it and it will not start a new cycle

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 311 Answers

May have a bad heater. press hi temp, air dry,hi temp, air dry (or whatever button is equivalent on your model). this starts a test and will allow unit to work again. When drying light goes out touch the heater. If it is cold then it may be bad. You will need a voltmeter to tell for sure however.

Posted on May 28, 2010

  • Ray Hicks
    Ray Hicks Sep 06, 2014

    On my dishwasher the buttons are named "high temp scrub" and "energy saver dry". Thanks for the tip as this indeed does put the machine in a test cycle and resets the light.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cancel light blinks maytag dishwasher


Check door switch. Also, the control pad may be shorted from water getting in between the plastic and corroding the connections to the buttons. DW

Apr 11, 2014 | Maytag Dishwashers

1 Answer

Green light is blinking over "start & resume"


It sounds like he didn't run it completely through try holding the cancel button down for a few secs.

Mar 22, 2011 | Magic Chef DU6500 Dishwasher

1 Answer

Constant flashing clean light


count the blinks shoud be 7 times it blinks then a pause if it does that its a heat circute problem need to check the heater and replace the controls

Jul 13, 2009 | Whirlpool Dishwashers

1 Answer

The start light just blinks and the dishwasher wont start?


just found a web site that says crack door open, press normal, hot dry, normal, hot dry, then cancel to reset the controls.

Mar 12, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Clean light blinks constantly



press heated dry
press normal wash
press heated dry again
press normal wash again..........
.....wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again

Hope this helps, it worked for me, but it may depend on your model.

Feb 05, 2009 | Kenmore Dishwashers

4 Answers

I cannot unlock the commands ; the red light ( paddock ) is on


Push the HeatDry and High Temperature buttons at the same time
Then:
punch these buttons back and forth until lights light up (about 5 times) then:
Hit cancel

Jan 01, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher

3 Answers

Green light on kenmore dishwasher is flashing


I actually had to change the steps a little and this is what I did:

press heated dry
press normal wash
press heated dry again
press normal wash again
wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again

Started a cycle and began washing.....Thx

Dec 31, 2008 | Kenmore 24 in. 16039 Built-in Dishwasher

1 Answer

My kenmore dishwasher had green clean blinking light


push cancel or start resume the green clean light will blink after every wash cycle to tell you the dishes are clean on some you just open the door to clear it on some you push stop or cancel

Feb 13, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

5 Answers

"Clean light" keeps blinking; dishwasher won't start new cycle


close the door and to cancel that just press hi temp and hetaer dry again hi temp and heater dry and all the lights is gonna light up, it getting into test mode.
After that press cancel
Now get somebody to replace the thermistor of your machine

Feb 19, 2007 | Kenmore 24 in. 17032 Built-in Dishwasher

Not finding what you are looking for?
Whirlpool 24 in. GU2548XTP Built-in Dishwasher Logo

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...