Question about Linksys RVS4000 Router

1 Answer

How do I hard reset the RVS4000? - Linksys RVS4000 Router

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 109 Answers

The Router’s ports and Reset button are located on the back panel of the Router.You can find a small push button with "Reset" written above it.
You can use the reset button:
If the Router is having problems connecting to the Internet. Press the Reset button for just a second with a paper clip or a pencil tip.
If you are experiencing extreme problems with the Router and have tried all other troubleshooting measures, press and hold in the Reset button for about 10 seconds. This will restore the factory defaults and clear all of the Router’s settings, such as port forwarding or a new password.
All The Best!!!
Please come back to vote, it would be a great appreciation for me and boost my determination to help so that I can keep on helping.

Posted on May 27, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Client does all the handshacking with the router

forward these ports for your VPN client ip address on your router...

TCP&UDP 10000
TCP 1723
UDP 1701

also disable firewall...

Jul 25, 2010 | Linksys RVS4000 Router

1 Answer

How enable multicast traffic on RVS4000?

1.Your router is set up for multicast automatically
2.Look at the QOS or traffic shaping.

Apr 19, 2010 | Linksys RVS4000 Router

1 Answer

My cisco router won't talk to a d-link switch

Make sure you have DHCP setup. Check the settings on your router and make sure everything is configured correctly.

Feb 13, 2010 | Cisco RVS4000 Router

1 Answer

I have two RVS4000 with the tunnel up, I cannot see any packets at the other end. I see the packets entering the tunnel but nothing at other end. Could it be the MTU is wrong

NO those routers are horrible.....return them as defective if you can and get the rv042 yes they are only 10/100 but they work.

Aug 20, 2009 | Linksys RVS4000 Router

2 Answers

Router settings to allow MacPro to access corporate VPN through router

The university that I attend compiled a great guide for setting up their VPN off campus. These should work for you as well:

So far as I can tell, you shouldn't have to change the settings on your router to access a VPN from your home.

Aug 14, 2009 | Linksys RVS4000 Router

1 Answer

I am trying to telnet through a Linksys RVS4000 from the wan side of the router to a fixed device on the lan side of the router. Both networks wan & lan are operational and I can ping the Wan side...

run netstat on the lan pc to see if telnet server is listening on port 23. look at logs on the router and pc to see if it is blocking any traffic. make sure lan pc has route back to wan

May 14, 2009 | Computers & Internet

1 Answer

Linksys RVS4000 Networking question

it seem that your best bet would be to look into remote access programs that can be found easily on I would suggest browsing some of the options you find on there.

hint: if your looking for a no cost solution, simply add the keyword freeware in the google search bar

Mar 10, 2009 | Linksys RVS4000 Router

1 Answer

Can't ping or see anything on remote LAN

They are defective i have gone through like 5 or 6 of them before sending them all back i would sacrifice the gigabit and go with the RV042

May 21, 2008 | Linksys RVS4000 Router

2 Answers

Rvs4000 latest BETA firmware

there's a firmware update available on Linksys' site (v1.1.09). Apparently, this update fixes quite a lot. So much so, that after installing it you MUST reset to factory defaults. So, make sure you update the firmware first thing, and then reset. Don't use any old setups.

please rate this solution on how it helped.

many thanks nick

Dec 19, 2007 | Linksys Wireless-G RVS4000 Router

2 Answers

Re internet connection loss

Hi, well it may be, but it indeed just sounds pretty normal to me ... lol  unless it is doing it very frequently?

I would tend to think that it is fairly normal to "Drop Off", "Hang Up" etc  say a few times a month, anything else, may indicate a problem.

Also try disabling Windows XP Service zeroconfiguration wifi this often causes this type of thing sometimes.

Oct 15, 2007 | Linksys Wireless-G RVS4000 Router

Not finding what you are looking for?
Linksys RVS4000 Router Logo

Related Topics:

5,888 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides