I need the reboot code - Samsung Lands Phones

According to Sony's official error code lookup, error code 8071040C means network memory running low

Solution: If you were playing a network game, exit the game and start it again or reboot the PS3 system
If you were doing something else, reboot the PS3 system

if you still having this code, maybe you need to change the built in wi- fi module.
Please tellme if this info helped you

It is in auto reboot mode when a failure occurs. You need to take note of the SC Code that appears before it reboots. That will tell you what is malfunctioning. If it boots up with that - as in immediately - unplug the machine, remove the hard drive, plug in and reboot. Does it still occur? Yes? You need a service tech to check it out. No? Replace the HDD.

once your payment is complete you will get an unlock code sent to your email within the indicated time frame. You simply dial in that code into your phone just like you would dial in any phone number , your phone will then be fully unlocked . And then you can reboot your blur.


If the information helped you then please give me some ratings.Thanks

You need to turn off reboot on error. Hit F8 several times a second on reboot before the OS windows appears. Scoll down and turn off reboot on error.
Now you will see what the error code is.

how to reboot playstaton 3

Hi,

to my best knowledge the preloaded os is Vista Home Premium so if you need to reboot your system you need to goto the start menu and select reboot...

alternatively you can do this also by entering the following code in the RUN....

shutdown -r -t 0

you can get the run by pressing 'windows key+r'

This is a fault of the Printer function's PWB (Printed Wire Board, more commonly referred to as a circuit board).

Hopefully this is a glitch and you'll be able to clear it. To do this press the 'P' (Program) key, then the '*' (asterisk) key, then the 'C' (clear), then the '*' (asterisk) key again (Sequence P->*->C->*. This will place the machine into simulation mode.

Now enter the number 14 on the keypad and press the 'Start' key (the one you normally press to start copies or scans). The machine will clear the fault and reboot. If it doesn't reboot shortly afterwards, press the 'CA' (clear all) key and it should definitely reboot.

If the code returns after rebooting, you need to contact a copier repair technician, as this will most likely be a PWB problem that needs further diagnosis and/or repair.

I hate to say it but you are very wrong mr samsung expert. One simple code will hard reset just about any samsung phone so remove your sim card from your phone and type
*2767*3855#

Now your phone will reboot and viola all codes, phone numbers, pictures, everything has been erased.

Type #*7337# Phone will reboot, and be unlocked. READ!!!!! YOUR IMEI NUMBER WILL BE 00000000...

ok try following steps:reboot your phone when they getting reboot press = green button(answer key) + 3 star key(*) but befor that make sure that your phone data will be lost above procudere may restore factory settings of your phone