Question about HP Color LaserJet 2600n Printer

1 Answer

The text is printed 5 times and fades away but i only print it once. every 5 a 10 cm i see the text i printed before it comes back every time and every time it is more fade away than before. if i print 1 line you see 5lines equealy spread on the paper and every line is fade away more.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • HP Expert
  • 217 Answers

This can be causewd by a worn fuser or a worn transferunit

Posted on May 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing laserjet fades from left to right on text only


Anthony try removing the cartridge and gently tilting backandforth a few times. Re-install for good news!

Mar 12, 2014 | HP LaserJet 4650 Color Printer

1 Answer

White vertical band in Cyan and Black


try to clean the laserwindows of the printer.

Mar 25, 2013 | Xerox Phaser 6125 Laser Printer

1 Answer

Toubleshooting and routine maintainance is what comes oout on myscreen


Found this on the web. Click on link below to print the entire manual out to keep. Below are steps to do cleaning. If you find this helpful pls rate me. Thanks and Good Luck.

http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_210C_420CN_EN_286.PDF

How to improve print quality Cleaning the print head
To ensure good print quality, the MFC will regularly clean the print head. You can start the cleaning process manually if needed. Clean the print head and ink cartridges if you get a horizontal line in the text or graphics on your printed pages. You can clean Black only or three colors at a time (Cyan/Yellow/Magenta), or all four colors at once.
Cleaning the print head consumes ink. Cleaning too often uses ink unnecessarily.
Caution
Do NOT touch the print head. Touching the print head may cause permanent damage and may void the print head’s warranty.
1 Press Ink.
2 Press or to select Cleaning.
Press Menu/Set.
3 Press or to select Black, Color or All.
Press Menu/Set.
The MFC will clean the print head. When cleaning is finished, the MFC will go back to standby mode automatically. If you clean the print head at least five times and the print has not improved, call Brother Customer Service (see Brother numbers on page i).
Checking the print quality
If faded or streaked colors and text appears on your output, some of the nozzles may be clogged. You can check this by printing the Print Quality Check Sheet and looking at the nozzle check pattern.
1 Press Ink.
2 Press or to select Test Print.
Press Menu/Set.
3 Press or to select Print Quality.
Press Menu/Set.
4 Press Color Start.
The MFC begins printing the Print Quality Check Sheet.
5 Check the sheet to see if the quality is OK by following these steps:
Color block quality check
The LCD shows:
6 Check the quality of the four color blocks on the sheet.
7 If all lines are clear and visible, press 1 (Yes), and go to Step 10.
OR
If you can see missing short lines as shown below, press 2 (No).
The LCD will ask you if the print quality is OK for black and three colors.
OK Poor
Is Quality OK?
1.Yes 2.No
Black OK?
1.Yes 2.N
8 Press 2 (No) for Black or three colors
with a problem.
The LCD shows:
Press 1 (Yes). The MFC will start cleaning the print head.
9 After cleaning is finished, press Color Start. The MFC will start
printing the Print Quality Check Sheet again and then return to
step 5.
10 Press Stop/Exit.

Jan 14, 2010 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Faded text every few lines- Canon printer


When you print photos you print in Max dpi, for this no faded lines anywhere. Probably you have a problem only in black color in print head.
Мay be it's partially clogged or partially defective.

Sep 28, 2009 | Canon i850 InkJet Photo Printer

1 Answer

Samsung 315 black color fades after 200 of 250 prints


remove the toner cartridge from printer and shake it well and insert it back and see the result of print

Sep 12, 2009 | Samsung CLP-315W Laser Color Printer

1 Answer

HP Laserjet prints everything multiple times


Is it the same image being repeated ?

If so then it is the drum not the developer unit.

There is a device for discharging the image once it has been transfered to the paper from the drum.

If that is broken then the image is not cleaned off and will repeat.

The other thing to look at is your setup to make sure it is set at A4 and it is being told to print one copy per sheet

Jun 23, 2009 | Office Equipment & Supplies

1 Answer

When I first print a page of text, it comes out all faded--like when the cartridge is empty, even though I just had the cartridge refilled. When I print the same page again, the text becomes a little...


Ok two things here, the slides need wiping with a cloth, even use a small amount of sewing machine oil on cloth ( SMALL AMOUNT I SAID) then run the machine in cleaning mode and also check the print mode this is in the printer queue module under tools or maintenace.

Jun 20, 2009 | HP DeskJet 845c Printer

1 Answer

My epson rx420 only prints the left hand side of any document ??? Can any one help please . many thanks


have you set the page setup in document is same with page setup at print setup. Some new epson printer use paper sensor to measure the paper width. If page setup wider than actually paper inserted, the printer will print only half page. example : Your document 10 cm wide, page setup 20 cm, and you insert 10 cm paper wide. It will print only half of 10 cm, 5 cm.

Jun 09, 2009 | Epson STYLUS R230 InkJet Photo Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...