Question about Xantrex Technology Xantrex Trace Series Inverter/Charger - 1500 Watt, 12 Volt, Model# TR1512-1

1 Answer

Inverting side working fine but charger is not

Dr1512 inverting side working fine but charger is not constant, up and down then turns off any ideas please

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 290 Answers

I had a similar problem at work yesterday.when your charger switches of it assumes that the battery is fully charged, while it is not.this is the solution , switch on you inverter machine and allow it to run, while it is running use a direct current "dc" multi meter a test the voltages of the batteries any one that drops like 3 volts below the normal voltage is bad. Change it and you will notice that the problem will stop. Note that when a battery is bad it takes little time to get it charged than when it is in a good condition .

Posted on May 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xantrex 458 freedom....has stopped charging house batteries off of engine alternator. Alternator is showing that it works (dash gauge). It does charge while on shore power or generator....but not charging...


Fis\rst of all is the inverter supplying 120 VAC? when turned on?. If so the inverter seems to be working.I think your problem is in the truck alternator/charging system. The inverter is independent of this charger..

Mar 23, 2010 | Xantrex Technology Xantrex 458 10 12...

2 Answers

When my batteries run low on power the generator starts up. Most of the time the system works perfectly, but lately the inverter will click and keep clicking and the batteries will not charge, then the...


please check the voltage your generator is supplying to the to the inverter because a high voltage and frequency can make the relays in the inverter to make clicking sounds,and also do not allow your inverter batteries to run completely low before you charge it

Jan 06, 2010 | Xantrex Technology Trace Series Inverter /...

1 Answer

I have a black and decker inverter type 1 400


First, you should be aware that the exact inverter is available for under 40 dollars all over the US. Your model is sold under several names - check out http://search.harborfreight.com/cpisearch/web/search.do?keyword=inverter .

I suspect that your INPUT power level is not adequate for the inverter to put out the 200W that the 150W charger needs. If you have low current and low voltage - then the inverter can only put out a proportionally smaller AC wattage level. You may also have a faulty voltage sensor....at the input. Once the inverter sees a low level (even momentarily), it alarms and shuts down the output until the unit is reset (turned off/back on)

Dec 28, 2009 | Black & Decker 1000w Power Inverter

2 Answers

I have a Heart Interface Freedom 20 Inverter/Battery Charger installed on a powerboat. The fan (cooling fan?) is making noise - it seems to be rubbling inside the unit. Is there a way to repair? Replace...


The fan can be replaced. It is very similar to some of the PC cooling fans. I've got the same problem (again) and will be replacing it soon. I will give you the fan specs once I remove my fan ( I think it is 4" 120VAC - will let you know when I repair mine).

Jun 14, 2009 | Xantrex Technology Heart Freedom 20 12...

1 Answer

Ibm thinkpad t43 backlight inverter issue


Did you say the the video output flickers on and off when you connect an external monitor to the video output. If the inverter is faulty this would not affect the video output and the external monitor would not flicker but if the external monitor flickers it would point to a video card problem.

Jun 13, 2009 | IBM ThinkPad T43 Notebook

1 Answer

Xantrex Freedom 458 Combi inverter/charger 2000 watt


OK my 2000 Discovery does the same thing. Try and hit the inverter charger with your fist 3-4 times, then listen and see if the charger fan starts up. I will be bringing my inverter to Portland this week to have the tech look at it. The other thing is it could be the transfer switch. Will let you know.

Jan 15, 2009 | Xantrex Technology Heart Freedom 20 12...

1 Answer

Toshiba Saterlite P20 Charging Problem


If you did not change the charger, then the battery is dead. Please replace...

Nov 16, 2008 | Toshiba (K000006570) Satellite P20 Series...

1 Answer

Lexmark x644e LCD Display Upside Down(Inverted)


Hello there,

I've seen this before. The X64X series with this inverted display seems to work fine (printing,scanning,faxing..) the reason for this is still unknown. But I've got it fixed twice by resetting the NVRAM on this MFP. If you are unsure of how to reset NVRAM, please follow the instructions below:

1.Power off the MFP
2. Hold down the 6, 7 and 8 buttons down and turn the MFP On.
3. Please hold down the buttons till it reads resetting factory defaults and then release the buttons. The MFP should now come back to ready status.

Please check out if this solves the issue, If not the machine would need a hardware service.

Merry Christmas!

Dec 18, 2007 | Lexmark T632 Laser Printer

Not finding what you are looking for?
Xantrex Technology Xantrex Trace Series Inverter/Charger - 1500 Watt, 12 Volt, Model# TR1512-1 Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xantrex Technology Electronics - Others Experts

Jimmer_9

Level 1 Expert

20 Answers

richie46

Level 3 Expert

8160 Answers

Jay Plesset

Level 3 Expert

2825 Answers

Are you a Xantrex Technology Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...