Question about HP Officejet Pro L7580 All-In-One InkJet Printer

2 Answers

Cant get PDF file type in Scan document settings. Had it, but reinstalled the software and now it doesn't show up. How do I add?

Posted by on

  • 4516 May 26, 2010

    Hi! Please visit control panel and click on ADD HARDWARE program. This will detect the printer and could resolve the problem. HOpe this helps and have a good one!


    May 26, 2010 - All hardware shows working properly. What I am trying to accomplish is to get a ,pdf file type to be available in the Scan Document Settings in the Solution Center. As I mentioned in my post. It was there before, but when I had to reinstall the printer it does'nt show up. May 26, 2010 - Thanks for the clarification, Please try to use a different cd rom when installing. The recent cd rom may have skipped the pdf installation which happens sometimes.May 26, 2010 - I installed using the latest full download from HP. Also ran thier diagnostic which confirms I have all the most recent drivers installed.

  • 4516 May 26, 2010

    Thank-you! Un-installed, cleaned registry and re-installed and all is well.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 4,737 Answers

Actually reinstalling the driver would have fixed the problem, but if it did not fix, then there must be some registry problem. Even viruses can be the culprit (please run a full system virus scan using an antivirus with a registry fixer). If you are sure that the you had included the Ocr/Pdf driver during the installation, please try once again, uninstall the software completely, run a registry clean (you can use this for registry cleaning if you don't have one or click here to download). Still having the problem even after running registry cleaning? Restore you system to the previous state when it was working. The only last option is to reformat the system and reinstall new programs. You can use this freeware http://www.a-pdf.com/faq/hp-scan-pdf-scanner-software-download.htm as an alternative to scan documents into Pdf file format. I wish you Good luck!

Posted on May 26, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Please visit control panel and click on ADD HARDWARE program. This will detect the printer and could resolve the problem. HOpe this helps and have a good one!

Posted on May 26, 2010

  • 1 more comment 
  • 4516 May 26, 2010

    All hardware shows working properly. What I am trying to accomplish is to get a ,pdf file type to be available in the Scan Document Settings in the Solution Center. As I mentioned in my post. It was there before, but when I had to reinstall the printer it does'nt show up.

  • dj_relly999
    dj_relly999 May 26, 2010

    Thanks for the clarification, Please try to use a different cd rom when installing. The recent cd rom may have skipped the pdf installation which happens sometimes.

  • 4516 May 26, 2010

    I installed using the latest full download from HP. Also ran thier diagnostic which confirms I have all the most recent drivers installed.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i to scan multiple pages into a single pdf?


You can get third party software in order to avail the facility to combine pdf to a single file

Jul 26, 2014 | Brother DCP Office Equipment & Supplies

1 Answer

How do I scan multiple documents and email them as one attachment



1. Click PDF on the Custom Scan with One-click tab or click PDF in the one-click mode screen to open the PDF dialog box.
* If you wish to convert the text in a document to editable text data, scan the item with the OCR. The precision of OCR is affected by the nature of the scanned original

2. Select the type of document to be scanned.
Important
To scan correctly, select a document type that matches the document to be scanned.

3. Select a file type to save the scanned image.
Select PDF, PDF(Multiple Pages) or PDF(Add Page)
Important
Click Set... to open a dialog box and specify the PDF compression type and other advanced settings for creating PDF files.
4. Place the first original on the scanner and click the [Scan] button at the right bottom corner of the PDF window.

5. When scanning is completed, place the next original and click the [Scan] button.

6. Repeat scanning by clicking the [Scan] button until you finish all the originals.
7. When all the original is finished, click the [Exit] button.

8. When the scan is complete, it automatically starts the application program that displays PDF files and opens the scanned image file in it.

To scan a text document or black and white document, you are recommended to set the Scan Mode to Black and White or Grayscale.
You are recommended to limit the number of pages in any one multiple PDF file to 20 or less if you are scanning a color document with the Image Quality set to 300 dpi and the size to a setting equivalent to Letter size.

Aug 07, 2013 | Canon MP Navigator EX for Windows

1 Answer

My Epson CX3810 all-in-one priner does not allow me to scan mulitiple document into one file. Each page is scanned as a seperate document.


The documentation is here: http://files.support.epson.com/htmldocs/cx38__/cx38__ug/wwhelp/wwhimpl/js/html/wwhelp.htm

 

You can scan multiple pages of a document on the document table and save them as one PDF file on your computer. Epson Scan displays an editing page so you can view the pages as you scan them and reorder, rotate, or delete them as necessary.

 

Select PDF as the file type setting.

When prompted "scanning complete.  Do you want to continue"  Click "add page"

Feb 28, 2011 | Epson Stylus CX3810 All-In-One InkJet...

2 Answers

I have an HP Officejet 6500. I want to scan a document to a PDF, then upload it to a website. How do I do it? I scanned the document, but now I can't find the PDF.


(1.) Start / All Programs / HP / HP Viewer / Scan Document (icon is in left margin)
(2.) A small screen appears entitled "Select Source", and provides the "HP Officejet 6200 Series TWAIN" option. Highlight this then click "select".
(3.) I accept the default provided on the next screen (i.e., radio buttons for "Document" & "Scan for editable text"; "Scan to:" (drop box) "HP Document Viewer; check "Show Preview" box; then click "Scan".
(4.) After a brief pause, my printer scans, then the HP Document Viewer screen on the PC provides a small image of the scanned document and allows me to click the "accept" icon.
(5.) After "accepting" the scan into the HP Document Viewer, it takes a minute for it to appear in the "viewer". Notice that the "View Thumbnails" tab is highlighted at the top of this screen. Click the check-box next to the scanned item then click the "View Page" tab just to the right of the "View Thumbnails" tab.
(6.) The new screen should show a larger version of your scanned document. Now notice the "Save As" icon in the upper left corner. Click that, then "yes" to warning default screen, then select a file name and location to save it into.
(7.) Before clicking save, click the drop box next to the "Save as type:" and select one of the pdf options. Mine offers: "PDF 1-bit", PDF 8-bit Grayscale", and "PDF 24-bit Color" options. Choose one of them then click "save".
(8.) You should then be able to find the scanned pdf file in the directory you selected to save it under.

Note that you may need all of the HP printer utilities and tool software installed for this to work. If you don't, you may need to uninstall/reinstall the printer software.

Nov 06, 2009 | HP OfficeJet 6210 All-In-One InkJet...

1 Answer

How to scan picture to upload on computer


First, ensure you are connecting the scanner to your computer. I'm assuming USB connection, and that you're using an operating system supported by this device.

Next, install the drivers and software for this device. Those should have come with an installation disc, but if you don't have that disc, you can get them from the PIXMA MP830 support site, here:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=123&modelid=12804

To scan a single document, place the document:
1. Place the document face down on the platen glass.
2. Open the MP Navigator 2.2 software.
3. Click Scan Photo/Document.
4. Click Document Type drop-down arrow and select the type of document to be scanned. Chose from the following types.
  • Color Document(Simplex): Select this to scan one side of color documents.
  • Color Document(Duplex): Select this to scan both sides of color documents.
  • B/W Document(Simplex): Select this to scan one side of monochrome documents.
  • B/W Document(Duplex): Select this to scan both sides of monochrome documents.
  • Text(Simplex): Select this to scan one side of text documents.
  • Text(Duplex): Select this to scan both sides of text documents.
5. Click 'Specify' and set the preferences as required. Click here for detailed information

6. After making the setting changes, click 'Scan'

7. Click 'Save to PC' or 'Save as PDF file'. Save to PC is displayed when an image is captured with Scan Photo/Document or Batch Scanning


The directions for Batch Scanning, or using the ADF to scan, are shown below.
  1. Place the document(s) in the Automatic Document Feeder (ADF).
    1. To scan using the ADF, remove any documents from the platen glass.
    2. Open the document tray.

      mp830_documenttrayopened.jpg
    3. Insert the documents face-up in the ADF and then adjust the document guides.

      mp830_adfguides.jpg
      Note:
      When scanning using the ADF, the documents will automatically feed.


  2. On the Windows desktop, double-click 'MP Navigator 2.2'.
    1. Alternatively, on the Windows taskbar, click 'Start', point to '(All) Programs', 'Canon', then 'MP Navigator 2.2'.
    2. Then click 'MP Navigator 2.2'. MP Navigator opens.

  3. Click 'Batch Scanning'.

    mp830_batchscanning01.gif

  4. Click Document Type drop-down arrow and select the type of document to be scanned. Chose from the following types.

    * Color Document(Simplex): Select this to scan one side of color documents.

    * Color Document(Duplex): Select this to scan both sides of color documents.

    * B/W Document(Simplex): Select this to scan one side of monochrome documents.

    * B/W Document(Duplex): Select this to scan both sides of monochrome documents.

    * Text(Simplex): Select this to scan one side of text documents.

    * Text(Duplex): Select this to scan both sides of text documents.

  5. Click 'Specify' and set the preferences as required. Click here for detailed information.

  6. After making the setting changes, click 'Scan'.
    1. After the documents are scanned, a dialog box will appear indicating to load the next document.

      mp830_scancomplete.gif
    2. After the next document is loaded, click 'Scan'.
    3. Repeat steps 6a and 6b until all documents have been scanned and then click 'Exit' to end the scanning process.

  7. After all documents have been scanned, ensure the documents, in the preview area, are selected (have a check mark).

    mp830_batchscanning03.gif

  8. Click 'Save to PC' or 'Save as PDF file'. Save to PC is displayed when an image is captured with Scan Photo/Document or Batch Scanning.

    mp006.gif
    Save to PC dialog box


    mp007.gif
    Save as PDF file dialog box

  9. Make settings to save a file. (Click File save settings for details.)

  10. Click 'Save' after all settings have been selected.

Aug 27, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Can't scan multiple pages into single document - reinstalled drivers but still can't - used to be able to. How do I fix this?


http://files.support.epson.com/htmldocs/…

I think this says you need Professional Mode rather than Full Auto Mode.

Under File Save Settings in the Professional Mode, you should see buttons for Add Page / Edit Page / Safe File.

Basically, you keep adding pages then finish.

If you already have multiple .pdf files that you wish to combine, Acrobat Professional (not READER) can do that.

Good luck,
- CarlD
- - -
I copied the text but I think you won't be able to see the images here:

4. Select PDF as the file type setting. The current Paper Size, Orientation, Margin, and Compression setting are displayed below it.

5. If you need to change any of the current PDF settings, click the Options button. You see the EPSON PDF Plug-in Settings window:


Select the settings that match your document and click OK. You return to the File Save Settings window.
6. When you are finished selecting file settings, click OK. Epson Scan scans your page and displays this window:


7. If you are scanning only one document page, or you don’t need to edit your pages, click Save File and go to step 10.

If you are scanning multiple pages, click Add page and replace the first page on the document table with the second page and click Scan. Repeat this step for each page in your document. When you are finished, click Edit page and go to step 8.
8. You see the Editing Page window displaying thumbnail images of each scanned page:


If you want to include all the document pages in your PDF file as they currently look, go to step 9.
If you want to delete some of the pages, click the odd pages or even pages icons, or click the individual pages you want to delete. Then click the delete icon to delete them.
If you want to rotate pages, click the pages or use the odd pages, even pages, or all pages icon to select the pages. Then click the left or right rotate icon to rotate them.
Note:
The delete icon is not available when all document pages are selected.
9. When you have finished editing your document pages, click OK. Your document is saved in a PDF file in the location you selected and you return to the EPSON Scan window.

10. Click Close to exit Epson Scan. Source(s): http://files.support.epson.com/htmldocs/…

Aug 22, 2009 | Epson CX8400 All-In-One InkJet Printer

2 Answers

How do I scan a document into a pdf and send by email


hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
237c944.jpg

http://www.hp.com/printer/prob676ijt65/solution

astrtr21

Aug 12, 2009 | HP Officejet 5610 All-In-One InkJet...

3 Answers

How do i scan a document and then email it


If you haven't done so, install the cd that comes with the HP Officejet package. Once correctly install, you should go to "All Programs" and locate "HP Solution Center" Click on HP Solution Center, click "Settings", click "Scan settings and preferences", choose either "scan document" or "scan picture" If word document then under File type: locate "PDF(*.pdf) If document is a picture then under File type: locate "JPEG image(*.jpg), click ok. Step 2 Choose between Scan Picture or Scan Document, click accept Step 3 your file is locate under "My scan" Hope that helps

Jul 10, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Don't know how to set scanner for multiple page scan into single pdf file


The supplied Canon software is horrible, but it can be done!

Launch ScanGearStarter, choose advanced tab and click preferences button, then select scan tab.
Untick box "Automatically quit ScanGear....." then click ok.
(This box being ticked totally prevents multipage single file scanning).

Now choose simple mode tab, select the document type, dpi and document size.
Now click the green "Multi Scan" button, place the document on the scanner glas and press next in the new window.

The page will be scanned and the ScanGear window will return, just click "Multi Scan" again and place next document, press next. Keep repeating until all pages are scanned, then close the ScanGear window.

This will bring up a third window showing thumbnails of each page, any of these pages can be deselected if required.
The other important step is to choose from the pull down list Saved as Type: "MultiPagePDF".

Choose the location for saving the file and click save.
Hallelujah! .......stupid software.

Jun 01, 2009 | Canon PIXMA MP780 All-In-One InkJet...

Not finding what you are looking for?
HP Officejet Pro L7580 All-In-One InkJet Printer Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...