Question about Philips Phones

1 Answer

Help me trouble shoot my phone

My phillips dect 1221 handset has become unregistered how do i re registar it? it needs a pin but i have no manual

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The PIN in the manual is '0000'

Posted on Jun 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have Uniden DECT1480-3. I purchased two expandable handsets, but I cannot figure out how to get the new handsets to register with the base unit.


Up to 6 handsets can be registered with the DECT 1480 phones. I have the 5 phone unit and needed to add the 6th phone. All I got was "Searching" in the display and the battery wouldn't even charge!

So here's what you have to do to get additional phones (up to 6 units) to work with the base. If you can get past step 1, it's a snap...

Step 1: Place a charged battery in the handset. This could be a problem if all your handsets are not registered, since unregistered phones don't charge (who thought of that design?). What I did was SWAP the battery from an already registered and charged phone with the new unregistered phone.

Step 2: Here's where the magic happens. Press the 'END' and '#' keys simultaneously... hold them down until a System Reset menu appears. Select "Deregister HS" and press Menu.

Step 3: Now, do the same thing again (hold down END and #), but this time select Base Unavailable and press Menu. You will see Base Unavailable Yes/No... Select Yes. Then place the handset in the base, wait a few seconds, and Voila!. it's registered. You can even change handset numbers using this menu if you play around with it.

Thank you, helpful employee at Costco for supplying the magic code. And hey there, UNIDEN... including this in the operation manual would have saved many customers much grief with de-registered phones!

Enjoy!

May 14, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

The handsets are displaying 'UNREGISTERED' and not working!


UNREGISTERED means the phone has not yet been set up to work with any particular base. I don't have any Phillips phones, so I can't tell you the procedure, but it should be outlined in the owners manual. Look for registering your handsets.

Jul 31, 2009 | Philips Phones

1 Answer

Wharfedale digital orb twin phone


TO REGISTER A HANDSET

[At the base]

1. Press and hold the the PAGE button on the base station for at least 3 seconds. You have 90 seconds in which to register a handset.

[At the handset]

2. Press MENU and scroll to ADVANCED SET and press MENU
3. Scroll to REGISTRATION and press MENU
4. If necessary scroll to display REGIST.BASE and press MENU
5. BASE 1 2 3 4 is displayed and the registered base number is flashing.
6. Enter the number of the base you wish to register to your handset. If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
7. When the display shows PIN---- , enter the base pin.
8. When the handset is registered to the base it is assigned a handset number.

If you have forgotten your PIN you will need to:

Reset your ORB

1. Press MENU, scroll to ADVANCED SET and press MENU
2. Scroll to RESET UNIT and press MENU
3.CONFIRM? is displayed. Press MENU
[NOTE: Entries stored in the phonebook and new answering messages are retained. You PIN will return to the Default setting 0000]

To Set the PIN

1. Press MENU and scroll to ADVANCED SET and press MENU
2. Scroll to PIN and press MENU
3. Enter the current 4 digit master PIN and press MENU. [Default setting is 0000]
4. Enter the new PIN and press MENU

Hope this has been helpful!

Rob

Dec 28, 2008 | Uniden Cordless Phone

1 Answer

We have a Philips CD445 three handset phone. Unfortunately one of the kids have managed to UNREGISTER one handset. I have tried several times to reregister it but it does not see the base. Any ideas?


Make sure no phone is on the base. Bring unregistered phone to the base. Find the handset locater button. Press menu > advanced set > registration > base 1. When it requests a pin enter your pin 0000 BUT DO NOT HIT MENU YET. Hold the handset locator button ON THE BASE for 5 sec. then press MENU on the phone. It should register.

Sep 12, 2008 | Philips Phones

1 Answer

Philips dect245 searching problem


1. try to reset handset. try sw reset in the manual .
2. try to clear the base. unplug power cord, press and hold "page " key , and plug the power cord , after 5 to 6 second release page key.
3. Register again.
4. If there is still searching , open the base and handset, to check ,if the antenna is broken or not.

Jul 30, 2008 | Philips DECT 2252S Cordless Phone

2 Answers

Dect 1221


On you base between Clear and intercon push middle button, with erow push display base -ID

Apr 07, 2008 | AT&T E5965C Cordless Phone

1 Answer

Phillips dect2152


If you bought the base and handset together they should already be registered. If not then the instruction manual is downloadable here: MANUAL


The relevant section is on page 16 - here is a copy:

4 handsets can be registered to the base station. A handset
can only be associated with 1 base station.
�� To register another handset
First enter registration mode by unplugging and
plugging back in the power adapter to the
electricity supply.
Handsets registering / unregistering ( )
�� To unregister the handset you use
enter the RC code*
�� To unregister all the handsets (except the handset you are using)
enter the RC code*
Once the menu is selected, enter the RC* code written under the base and press
to confirm.
Warning : If you wish to associate a non-Philips handset to the DECT 211 or DECT 215 base
stations, make sure that these handsets are GAP compliant otherwise they will not operate properly.
*RC code
(Registration
Code) is
written under
the base.
Warning : Once unregistered, the handset is no longer operational.

Please rate my assistance this should be a fixya!

Mar 29, 2008 | Philips DECT 2151 Cordless Phone

1 Answer

Handset says unregistered


The manual says that to register it needs to be completely powered off and then restarted. I unplugged my battery and then plugged it bacdk up.

Feb 28, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

kakima

Level 3 Expert

96683 Answers

Are you a Philips Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...