Question about GE DCSR483EA Electric Dryer

1 Answer

DCXR463GA2WW Squeak My dryer has a "Squeaking" noise, like a bearing or a belt while in use. It has also now developed a "low rumble" in opposing sound with the squeak. So it goes "squeak, rumble, squeak, rumble..."

Posted by on

  • Anonymous Jun 26, 2008

    After a while when I turn my dryer on it starts making a squeaky sound. What sound I do? And how do I find out what is the problem and to replace it.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 184 Answers

YOU MOST LIKELY HAVE A REAR DRUM BEARING FAILING. IT IS A SMALL TEFLON BEARING THAT SLIPS ON OVER THE REAR SHAFT OF THE DRUM AND INTO THE HOLE IN THE REAR OF THE DRYER. THERE ARE ALSO FRONT GLIDES THAT SUPPORT THE FRONT OF THE DRYER. OLDER DRYERS HAVE THE FRONT SUPPORTS UNDER THE DRUM SO THE DRUM RESTS ON THEM. NEWER G.E. DRYERS HAVE A PLASTIC RING WITH THREE TEFLON GLIDES ON TOP OF THEM AND THE DRUM HANGS FROM THESE GLIDES. REPLACE ALL OR SOME OF THE ABOVE PARTS TO ELIMINATE YOUR SQUEAK.
ON OTHER POSSIBILITY, THE IDLER PULLEY THAT KEEPS TENSION ON THE BELT CAN BECOME A SQUEAK MAKER.

Posted on Apr 08, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2008 Pontiac g6. when i drive i get a squeaky noise coming from the front passenger side. sometimes its super loud and sometimes its quiet or none existent. When the noise is there it tends to go...


My first thought is v-belt or serpentine belt loose or bad, may have a problem with the belt tensioner.
If not the belts I would make sure none of the pulley bearing are going out. belt tensioner bearing also. If you remove the belts you can try moving the pulley up/down, side to side see if shaft moves may be bearing. Try spinning the pulley see if it makes the squeaking noise.
If it were a brake pad I would think the car would want to pull some to the right..
wheel bearing cv joint but my experience is wheel bearing, ball joints seem to make more of a rumble than a squeak.

Aug 19, 2018 | Pontiac Cars & Trucks

Tip

Gas & Electric clothes Dryer sqeaks, rumbling, & noises


If your clothes dryer has any sort of uncommon noises coming from it they are fairly easy to repair. The drum turns with the help of a belt with a belt tensioner. The tensioner keeps the belt tight. The tensioner also has a roller with a bearing. If the bearing goes dry it will squeak. If the bearing locks up the belt will burn and you will smell burning rubber. Eventually the belt will break off. The roller can be ordered from most companies with the belt. It is advisable to replace the drums front seal that rides along the front panel. These will wear and squeak too in time. To service these parts the front panel must be removed to gain access. All parts are fairly easy to repplace with someone helping you to hold the drum up when re assembly come up. You can also ask me more questions if needed.
Thanks for stopping by reading my tips!
frank

on Feb 06, 2010 | Washing Machines

1 Answer

Have ford galaxy steering rumbles at low revs, have changed pump, replaced tensioner & belt fluid level looks ok. Cured problem for a while but rumbling & squeaking returned after about 2 months...


The first thing I will chk ,I will see any belt wearing sign,it that normal?any oil on the belt?is it only morning is making noise?second ,i saw some belt from the factory built is not as good as OEM.it will make noise .hoped that's help :)

Jan 26, 2014 | Ford Cars & Trucks

2 Answers

GE dryer Mod # DWXR463EG1WW is squealing. Does anyone know what is wrong with it and how I can fix it?


Sounds like a rear bearing . remove the 2 screws from the top when you open the door . this way you can take the top off . When you take the top off remove the screws on the inner left and right on the front panel. disconnect the belt from the pulley and motor and pull the drum out . then you will see the rear bearing . cheap fix but can be a pain. good luck

Feb 16, 2013 | Dryers

1 Answer

Loud squeaking noise when you start up the dryer could it be a bearing dull squeak not high pitched a little bit of a grind sound


It does sound like a bearing or at least a lack of lubrication. But it could also be belt slippage if it only happens at the start. If it is the bearing it would be continuous and slowly get louder and louder.

Jun 18, 2011 | Whirlpool LER7646E Dryer

1 Answer

Weird squeaking noise from under hood started from sitting an hour after being driven ,noise goes away when accelerating but comes back when not ,when parked noise is constant a type of squeaking noise


You should have your belts checked for proper tension. If they're squeaking when the engine is at a low RPM then they are most likely loose and need to be tightened. However, that squeak may also be an indication that one of the tensioners in the belt's line may be wearing down. If that is the case the tensioner will need to be replaced since the bearing inside is worn down beyond the point where lubrication would be useful.

Mar 05, 2011 | 1988 BMW 3 Series

1 Answer

Drum initially starting squeaking. now it will


The squeak was from a bad bearing in the belt tensioner.
replace the roller assembly for the tensioner and the belt too.
The roller has a bearing in it that has gone bad causing this problem

Mar 13, 2010 | Frigidaire FDE336RE Dryer

1 Answer

When we turn on our Whirlpool Supreme electric dryer, it heats up and dries clothes, but it is making a loud squeaking noise throughout the cycle...sometimes louder than others.


The squeaking noise can be caused by any of the following.

Location High:

Belt slipping on the dryer drum

Worn Drum seals but would sound more like a dragging noise

Location Low:

Belt tensioner pulley bearing frozen and the idler pulley shaft is spinning inside the belt tensioner assy.

Belt slipping on the motor bearing

Motor bearing is dry

Thanks for using FixYa!

Kelly

Mar 04, 2010 | Whirlpool LER5636P Electric Dryer

1 Answer

Hotpoint dryer squeaks at regular intervals


Slow squeaking or scraping noises are often from the rear bearing behind the square panel, the rear bearing sleeve is inside the middle of the heater housing and the shaft part is attached to the back of the drum by a "C" clip which needs to be removed first.

The disassembly slideshow is here:

Slideshow

Sep 26, 2009 | Hotpoint TDL15 Electric Dryer

2 Answers

Intermittent Squeaking


You know how when the pads on your car get worn they start that noise? Well the bearing that holds the tub has a metal bracket. When that plastic wears down it begins to makes those noises. If left alone the metal bracket will eventually cuut into that drum bearing like a guillotine. I have pictures. Have the women and small babys leave the room: Click (HERE)




If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Jul 08, 2009 | Frigidaire GLER341A Electric Dryer

Not finding what you are looking for?
GE DCSR483EA Electric Dryer Logo

Related Topics:

1,331 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

vince

Level 3 Expert

1234 Answers

gbob59

Level 3 Expert

3042 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...