Question about HP Office Equipment & Supplies

1 Answer

Hi, how can I fix the following error on my HP1552nf printer. It says; 'scanner error 8 - turn off and then on again'. I did so and took the cable out of the wall, but nothing happens. Any advice how to fix thia problem?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Contributor
  • 1,070 Answers

Hello,
You need to Remove/Uninstall Driver Completely From your System and Download it from here OR from here and Install

  • Disconnect the printer if it is connected using a usb cable.
  • Click on the icon and select All Programs.
  • Select the HP folder, then select the printer and select Uninstall
  • Once the uninstall is complete select Devices and Printers
  • Click on another printer or the Microsoft XPS Document Writer
  • Click on Printer server properties in the top menu
  • Choose Drivers in the Installed printer drivers select the printer that was uninstalled in step 3.
  • Click on Remove and when asked choose Remove driver and driver package and click on ok.
  • Install the Current Operating Systems's Driver software for the printer.
Still have Problem Contact Link...Thanks for Contacting FixYa.....................

Posted on May 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson wf-2540 Scanner error


Hi Richard,
I suggest You Go to Official Epson Printer trouble Page For You Epson Printer Problem On Below Epson forum URL Link:
Epson WorkForce WF 2540 All in One Printer

OR
In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : Epson Printer Support

Feb 11, 2014 | Epson WorkForce WF-2540 All-in-One Inkjet...

1 Answer

Scanner gives me code 5,145,61 how can fix it ?


RE: Scanner gives me code 5,145,61 how can fix it ?

I was using wireless router and receive exactly the same error code as above.
SOLUTION: Turn-off printer/scanner; reset or turn-off the wireless router power and then turn-on again. Turn-on the scanner. Start scanning.

Mar 11, 2012 | Canon PIXMA MP495 InkJet Printer

1 Answer

Error:oxc1ab001


Hello,

to fix the problem, you need to reset the printer. Follow the procedures below to successfully reset your printer:

1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the printer.
3. Wait for the "Insert Cartridge" message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.

Good luck.

Oct 20, 2010 | HP Photosmart 2575 All-In-One Printer,...

1 Answer

HP All-in-One 3055 "Scanning Error 6" What can we do?


Hi Cherylanne, Give this a try: Scanner Error 6 Turn off then on

1. Clean Glass Scanner Bed.

  • If the glass scanner bed is too dirty or smeared with fingerprints and such, you may get this error. It will not clear itself simply by turning off and on the printer such as the message suggests. Even a build up of dust can cause this. It is triggering a reaction caused by a sensor in the scanner. If you clean it good and then power cycle it, the problem should go away. THIS PROCEDURE FIXED THE PROBLEM FOR THE AUTHOR.

2. Try the NVRAM INITZ reset procedure. REF

  • switch off the printer, then remove all cables connecting to the printer but just the power cable.
  • then press and hold the *(start/symoble) and 5 button togather and turn on the printer.
  • continue holding the button till you see "perment storage init" displayed and releas the button.
  • then at a given point of time the printer will ask you to change laguage,time,date etc.

3. Remove paper scrap or dust obstructing scanner or sensor. REF

4. Clean sensor / remove the glass and clean the bulb and mirrors. REF

  • turn off power
  • remove ADF and inspect blew out any dust
  • unclipped control panel cover and removed top platen cover 4 torx screws
  • inspected and dusted (blew out) the scanner
  • put platen cover back again and placed 5 sheets new paper over right side (where scanner is) and turned on came up happy
  • turned off reinstalled ADF (cleaned the white surface first) turned on again

5. Scanner Bulb is not getting to the alignment area.


Information found @

http://wiki.robotz.com/index.php/HP_LaserJet_3055


Regards


Mike

Oct 12, 2010 | HP LaserJet 3055 All-In-One Printer

2 Answers

Printer error code 6202 when I start my printer


I unplugged the power supply several times. So far it seems to be working.

Jan 15, 2010 | Kodak ESP9 All-in-One w/USB Cable & 4x6...

1 Answer

Don't print error scaner


have just managed to repair my Epson CX3200 thanks to the site! It took 24 hours of messing about but now it works perfectly again. It had the error light on and the display said certain items inside printer are beyond user life contact distributor. It has been a great machine for 3 years exactly and as it had been performing perfectly I was loathe to bin it. I followed the advice and hey presto! I have few tips to anyone attempting same.
1. Download from the site as recommended SSC Service Utility http://inkjetprinterhelp.us/
2. When taking off the scanner unit there is a smallish cover on the left hand side of the printer at the back; remove this and disconnect two ribbon cables, two cables with push pin conectors and a spade connector, 5 altogether.
3. Two screws hold down the hinges of the scanner unit remove and store carefully. Lift off scanner unit.
4. Take out four screws holing printer body on, long magnetic philips screwdriver needed. store screws lift off cover.
5. At back of printer are the three waste ink pads; use a spade end screw driver to lift out one at a time. They are about 5cm x 9cm and the bottom one is slightly different shape to other two.
6. Rinse them thoroughly with water and then squeeze out and dry. I used kitchen roll and then hair dryer.
7. Replace one at a time tucking in corner bits with screwdriver.
8. Replace body, scanner unit, wires and cover.
9. Connect up printer and switch on. Error light will come on again; don't dispair, this is what fooled me. Open SSC utility on desktop and then close; icon appears in lower right screen on application bar like printer icon. Right click and pop up menu appears; left click on "Protection Counter" and then "Reset Protection Counter".
10. Turn off printer and then switch back on again. Error light should go out and you can carry on.

Apr 17, 2009 | Epson Stylus CX3200 All-In-One InkJet...

1 Answer

Cartridge Error, Error 50C


Hi there Error 50c

Dell gets this lots so have a try.

Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

1) Press Power to turn the printer off.

2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

3) Turn the printer on.
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

4) Remove the color ink cartridge.

5) Lower the printer (scanner unit) until it is completely closed.
If the error message displays again, replace the black cartridge with a new black cartridge.

If the error message does not display, repeat steps 1–3 and then go to step 6.

6) Reinstall the color cartridge and remove the black ink cartridge.

7) Lower the printer (scanner unit) until it is completely closed.

If the error message displays again, replace the color cartridge with a new
color cartridge.
If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
8) Lower the printer (scanner unit) until it is completely closed.

If you get the error message again, while both cartridges are installed, replace both of the cartridges.

Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

You may have to buy a new cartrige.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Mar 02, 2009 | Dell A940 All-In-One InkJet Printer

4 Answers

52 scanner error


HP LASER PRINTER ERROR CODE 52 – INCORRECT SCANNER SPEED ERROR


HP LASER PRINTERS 2, 2D, 3, 3D

1. Defective cable laser scanner to dc controller. 

2. Defective laser scanner assembly. 

HP LASER PRINTERS 2P, 2P+, 3P 

1. Bad scanner motor. 

2. bad dc controller. 

HP LASER PRINTERS 3SI, 4SI, 4V

1. Faulty cable assembly. 

2. Scanner motor problem.

3. Defective laser scanner assembly.

4. Defective dc controller. 

HP LASER PRINTERS 4, 4+, 5 

1. Faulty laser scanner cable. 

2. Defective laser scanner assembly.

HP LASER PRINTERS 4L, 4P, 5P, 5L, 5SI 

1. Temporary error. Scanner startup failure.

2. Improperly fitted scanning assembly.

3. Scanner cable problem.

4. Defective laser scanner assembly.

5. Defective dc controller board.

HP LASER PRINTERS 1200, 2200, 3100 FAX, 3200 FAX, 4100

1. Temporary error. scanner rotation error.

2. Replace contact image sensor. 

4. Replace laser scanner. 

5. Replace cables to laser scanner and engine board
HP LASER PRINTERS  1100, 2100, 4000, 4050, 8000
1. Scanner start up error
2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ***'y.
3. Replace scanner ***'y.
4. Replace the engine board.
5. Replace the D.C. controller only on the 8000.
HP LASER PRINTER 2300 ERROR 52.X
1. A temporary scanner start up error.
2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge.
3. Replace the scanner ***'y.
4. Replace the engine board.
HP LASER PRINTERS 4200, 4300 ERROR 52.XX
1. Printer scanner speed error has occurred.
2. Replace laser scanner ***'y
3. Replace the D.C. controller ***'y
HP COLOR LASER PRINTER 4600, 5500 ERROR 52.XK, 52.XC, 52.XM, 52.XY
1. Error code K - No Black Color.
2. Error code C - No Cyan Color
3. Error code M - No Magenta color
4. Error code Y - No Yellow color
5. Replace laser scanner ***'y
6. Replace the D.C. controller ***'y
HP LASER PRINTERS 5000, 5100
1. Printer scanner speed error has occurred.
2. Replace laser scanner ***'y
3. Replace the D.C. controller ***'y
4. Replace cable ***'y from scanner to D.C. controller.
HP LASER PRINTERS 8100, 8150
1.Laser scanner error/start up/rotation error
2.Replace laser scanner ***'y.
3.Replace D.C. controller board.
4.Replace cable ***'y from scanner to D.C. controller

HP LASER PRINTER 4500, 4550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner. 
3. Replace D.C. controller ***'y
HP COLOR LASER PRINTERS 4600, 5500
1.Laser scanner error/start up/rotation error.
2.Take the toners out and reseat them, or replace them
3. Replace laser scanner ***'y
4. Replace D.C controller board.

HP LASER PRINTER 8500, 8550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner motor.
3. Replace D.C. controller ***'y

HP LASER PRINTER 9000 

1. Temporary laser scanner error/start up/rotation error

2. Replace laser scanner.
3. Replace upper cable guide assembly.
4. Replace DC controller. 

Oct 22, 2008 | HP LaserJet 2840 All-In-One Printer

7 Answers

Scanner error 6


in my network i have hp M1005 printer always i'm getting this msg "scanner error 6 turn off
then turn on"
when i make turn off and turn on again same msg comming

how can i solve this problem...

Jan 16, 2008 | HP LaserJet 3050 All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...