Lexmrk x3470 all in one hardware seems to causing startup problems with vista

Use the link below the download and install the Lexmark X3470 printer driver for Vista on your computer: - Lexmark X3470 Printer Driver for Vista 32-bit - Lexmark X3470 Printer Driver for Vista 64-bit
Follow the instructions on your computer screen.

If you're running Windows XP (Any version) or Vista open the link provided below for instructions on how to repair you're master boot sector other wise known as fixmbr; http://helpdeskgeek.com/how-to/fix-mbr-xp-vista/

Good luck!
Read everything.
Mike

Hi,
Try uninstalling the Lexmark software. Then click on this link http://bit.ly/c0OInU to download the latest windows vista driver and all in one center. That should resolve your problem.
Best Regards.

This sounds like the dreaded Windows Vista Black Screen of Death (KSOD). you might have a bad hard drive, but even more likely some software or a driver is causing a problem and caused Vista to get stuck. The repair will not work. You might be able to run a complete repair from the Windows Vista CD, if you have one. If you are not too experienced, take it to a reputable computer service center. If you are at all technical and have time, google your problem and you will see thousands of similar users with same problems.

This is one reason Microsoft released Windows 7 so soon.

That problem is related sometimes to old printer drivers. Please uninstall your printer from your PC and restart the PC then go to the Lexmark.com site and dowload the drivers for your X3470 those should be the new drivers and once installed they should not cause that problem.

Although the sounds of this problem is more of a software issue than hardware, one of several things could be the cause ... faulty RAM (freezing issues), battery or mobo (power supply issues), corrupted Vista update installs (no surprise there), faulty startup programs, infections in the system ... I suggest trying these options: 1) run a detailed hardware scan to find any faulty hardware. 2) turn off laptop, take battery and AC adapter out, hold the power button for 10-30 sec then plug everything back in. 3) run a "chkdsk /r c:" on the command prompt using any Vista disc repair mode to find and fix possible corrupted O/S files then go to restore mode and load a time and date before the incident happened. 4) see if you can get into safe mode without the blank screen issue, go to run and type "msconfig", go to "startup" tab and turn off any programs that looks out of place, then go to "services", click on "hide all ms services" and disable services that looks out of place. 5) scan for infections. If you have Norton or McAfee, remove it ... and if you remove it ... be sure to use their removal tools located on there respective website. They usually leave residual files behind after removal using conventional means (ie Add/Remove programs) If none of these help ... backup your stuff and do a recovery!

CHECK THE FOLLOWING FOLDER INTHE CONTROL PANAL;

DEVICE MANAGE[GREEN MARKS OKAY ANYOTHERS BAD, CLICK ON THEM.]

NETWORKING AND SHARING SAME AS ABOVE.

PROBLEM AND REPARTS, SERICUTY AND SYNC CENTER.

ANTI VIRUS AND FIREWALL MAYBE CAUSING ALOT OF YOU ISSUES

ROD

Yes, select the tab labeled Specs under the printer picture on this link, and check specifications. Vista is listed as a supported operating system.

The Lexmark x3470 doesn't support faxing.

Hi,

You can download it here from Lexmark.