Refrigerators Logo

Related Topics:

Posted on May 25, 2010

Model ED5FHAXS001 automatic ice is not working water is on

1 Related Answer

Anonymous

  • 10865 Answers
  • Posted on Nov 05, 2009

SOURCE: My Whirlpool refrigerator Model # ED5RHEXNL00 Ice maker broken

Hello. Thanks for choosing fixya! The most common cause for your problem is that someone accidentally raised the wire in the icemaker area that turns it off. Check that first if the wire is up, push it down and within a few hours you will have new ice. The second most common problem is that the cubes in the mold got stuck in there. the fix is to use a blow dryer to free them up, then dry out the mold and spray some PAM cooking spray in to the mold to lubricate it. The final possibliity is that there is ice in the water supply line that feeds your ice maker. Once again get out the blow dryer and thaw that ice so that the water flows once again. good luck with it. regards, joe

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

GE Automatic Icemaker Model ZDIS15CSSF, won't make ice.

These units often have a hard-to-see reset button to resume proper operation. Look hard or check your manual.
0helpful
1answer

GE Fridge water dispenser working but not the ice

Yes you most likely have a defective dual water control valve. Look around the inside of the refrigerator for a model number.
Click here=> For most locationsSide-By-Side
  • Top Freezer
  • Bottom Freezer
    Once you find the model number I will be able to tell you what part number the dual dual water control valve is or if your ice maker assist you in testing ice maker. If ice Maker is empty try filling with tap water to top edges of ice maker, allow water to freeze and if the ice drops into the ice bin but does not refill with water automatically I would say that the dual water control valve will need replaced. If your ice maker has old shrinking ice from a few days ago it will point to an ice maker problem.
    Thanks, Sea Breeze
  • 0helpful
    1answer

    Whirlpool automatic icemaker not working

    Try swapping the wires on the dual water inlet valve. It’s on the back where the water supply comes in. Then try the water dispenser. The water should go to the ice maker. This will tell you weather or not the ice maker valve is working and if the line is clear.

    The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn't seal good because of sediment or wear it will continue to drip and when the water reaches the ice maker supply tube it will freeze blocking the fill tube.. You can take the water line off the valve and watch to see if it drips.

    1helpful
    1answer

    No water in automatic ice maker, therefore no ice cubes.

    Do you get water at the front dispensor, if present? If not check the refrigerator water filter. If you have an RO system feeding filtered water to the fridge, check it's filter. Also there is a solenoid that lets water into the ice cube maker, have a professional check it to make sure its working correctly. Lastly I have had to replace the entire ice cube maker, sometimes they do fail. Replacements can be found fairly easy on the internet.
    0helpful
    1answer

    My Whirlpool refrigerator Model # ED5RHEXNL00 Ice maker broken

    Hello. Thanks for choosing fixya! The most common cause for your problem is that someone accidentally raised the wire in the icemaker area that turns it off. Check that first if the wire is up, push it down and within a few hours you will have new ice. The second most common problem is that the cubes in the mold got stuck in there. the fix is to use a blow dryer to free them up, then dry out the mold and spray some PAM cooking spray in to the mold to lubricate it. The final possibliity is that there is ice in the water supply line that feeds your ice maker. Once again get out the blow dryer and thaw that ice so that the water flows once again. good luck with it. regards, joe
    1helpful
    2answers

    Ice maker not working

    Usually when this happens the water line in the freezer is frozen. If this is the case, defrosting the freezer should free it up and all will work again.
    0helpful
    1answer

    WATER FREEZING IN ICE MAKER

    check 2 things. Make sure the fill tube is going downwards to the cup inside. The second thing is when the valve shuts off make sure it closes right away. If it doesnt then replace the valve.
    Not finding what you are looking for?

    334 views

    Ask a Question

    Usually answered in minutes!

    Top Whirlpool Refrigerators Experts

    Mike Cairns
    Mike Cairns

    Level 3 Expert

    3054 Answers

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Brad Brown

    Level 3 Expert

    19187 Answers

    Are you a Whirlpool Refrigerator Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...