Question about Rimage AUTOMATED PRINTERS: PrismPlus AutoPrinter

1 Answer

The print image is not fully printing on the surface of disc

I just installed a new printhead in my rimage autoloader printer. The image is now fully printing on the disc surface. I think i my have a pitch problem. Can you help?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

The pitch is a very sensitive adjustment. You need to loose one screw while tightening another to change the pitch of the head. I usually do this in 1/4 turn increments. Use the test pattern in Test mode when doing this adjustment. I have instructions if you need them..
John Norman Max Optical LLC. 610-269-7033

Posted on Aug 10, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Rimage 3400 auto loader

R U sure the firmware update was the correct update and that it installed successfully? Check in the firmware part of the burning program to obtain a list of the currently installed firmware.

Apr 07, 2014 | Rimage Professional 3400 NSS CD/DVD...

1 Answer

Light areas

Most likely you have a bad print head? But is also could just be a dirty printhead in need of cleanning. Run this test patern after cleanning the printhead.

John Norman
Max Optical llc.

Feb 09, 2014 | Rimage Perfect Image Prism Thermal Printer

1 Answer

Using CD Designer I try to print my disc on my Everest II printer and it appears to be printing and then the tray opens and the disc is blank - "no image printed on the disc" I do not get any...

Check the ribbons. If your CD image is still on the color ribbon your print head is probably bad. If the image is on the transfer ribbon replace the heat roller.

Apr 17, 2011 | Rimage Everest II Printer

1 Answer

My rimage is printing but there is an 1in mark that appears on all my disk what can it's almost like its on a roll or something every 5in roll u get the markl..i install new ribbon and...

Is there anyway you can send a picture of the disc with the bad print? It may be a worn our roller which is an easy fix.

My email is - info at techwaredist dot com

We to repair work on Rimage Everest II and Everest III printers regularly.

Mar 24, 2011 | Rimage Everest II Printer

2 Answers

Installed a new printhead. It worked but I tried to align it and got it to the point where it doesn't print at all. Is there a reference point to start over on the head alignment?

Are you talking about Print head Angle? this is a difficult adjustment and you need to adjust the front and back Allen screw at the same time. Usually in 1/4 turn increments.

Aug 06, 2010 | Rimage Prism Plus Thermal Label Printer

1 Answer

Printing on Verbatim DVD-R Discs using a Rimage Prism Plus Printe

Most likely is is just a dirty printhead and rollers.
John Norman Max Optical LLC. 610-269-7033

Sep 30, 2009 | Rimage Prism Plus Thermal Label Printer

1 Answer

Printing issue

Simply adjust hhow the printer rests on the autoloader. There are two little allen wrench slots which adjust the printer both horizontally and vertically.

Jul 29, 2008 | Rimage AUTOMATED PRINTERS: PrismPlus...

1 Answer

Rimage Everest III printing quality issues

Hi Jay, do you have any idea how many discs have been printed with this Everest Printer?

Your issue sounds like a hardware error, not an issue with the software you are printing from. Most likely the printhead needs to be replaced, or the control board. Printhead replacement costs approx $1200.

- techware dist

Apr 14, 2008 | Rimage Everest Autoprinter Thermal

Not finding what you are looking for?
Rimage AUTOMATED PRINTERS: PrismPlus AutoPrinter Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rimage Office Equipment & Supplies Experts


Level 3 Expert

8073 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

80339 Answers

Are you a Rimage Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides