Question about Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Washing covered in dirty marks

My hotpoint washing machine has never washed properly from new.The Hotpoint engineer said i needed to wash on a higher temperature ,this makes no difference.If i wash my washing by hand and then use my washing machine to rinse and spin the clothes come out covered in dirty marks.I have never had trouble with Hotpoint washing machines until they brought in only cold fill.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 5,568 Answers

It sounds as if a bearing seal was defective when it left the factory and is allowing lubricant to bleed out; I would consider this a warranty item and if the company doesn't care to make it right, file a complaint with the local BBB relating to the dealer where you bought it and nationally against the company itself.
Maybe they don't want this stain on their reputation but this is another reason to avoid US manufacturers.

Posted on May 25, 2010

Testimonial: "Thankyou for your helpful comments."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint Futura HF8B593 keeps leaving a dirty residue, brown slimy in consistency over the washing. The machine isn't overloaded, I.e. Just duvet cover in there. Help I have had enough


Wash out tub with bleach,fill a cup of of bleach and let washer run thru all cycles.After it shuts off ,leave door open to avoid mold from growing

May 07, 2017 | Hotpoint Washing Machines

1 Answer

How to put in the circuit board on hotpoint aquarius wf440 ?


this may be of some help good luck

otpoint control module configuration for selfix - YouTube

? 9:21
https://www.youtube.com/watch?v=cHpz2OcbHAY

16 Sep 2011 - Uploaded by Selfix UK
Hotpoint control module configuration for selfix ... How to change the display pcb on an Ariston Washing ...

How To Replace A Washing Machine PCB - YouTube

? 4:19
https://www.youtube.com/watch?v=vskrPU9zU5M

27 Apr 2013 - Uploaded by Selfix UK
How To Replace A Washing Machine PCB ... Repair HotpointWF541 WF540 WF740 with flashing lights ...

Modules & Control Boards ' Washing Machines ' Spare Parts ' Hotpoint

parts.hotpoint.co.uk/.../washing-machines/...boards/.../C8-RIC-LVTRC-...
Have you lost complete control of your washing machine? ... If your PCB assembly (printed circuit board) is faulty then replace today for an efficient and effective ...

How to Replace Washing Machine Control Panels - Hotpoint ' eSpares

www.espares.co.uk > Home > Advice Centre
8 Jun 2010 - Replacing any of the front panel controls on a washing machine is ... how to replace any of the knobs, buttons, printed circuit boards that sit ...

How to Diagnose Washing Machine Control and Program Problems ...

www.espares.co.uk > Home > Advice Centre
14 Nov 2013 - Watch Josh explain how to diagnose washing machine control and program problems. ... If you then suspect that the problem still lies in the circuit board ... to test the board and you'll actually just need to replace it altogether.

Hotpoint WD420 fault ' Page 2 ' DIYnot Forums

www.diynot.com > Forums > How to... > Appliances

31 Oct 2009 - 15 posts - ‎11 authors
hotpoint aquarius wf530 washing machine flash like Christmas tree when ... After reading this forum I took the PCB board out and the C17 ...

Hotpoint WF540 washing machine board issue - pics included ...

www.electro-tech-online.com > ... > Repairing Electronics

19 Mar 2011 - 14 posts - ‎9 authors
Just took the board out of the washing machine to check the c17 cap ... was gonna cost £150 just for a replacement board without fitting.

Hotpoint - EMW Electronics

https://emwelec.co.uk/index.php?l=product_list&c=13
This is the Mark 6 board fitted to late Hotpoint washing machines. The module will be programmed to your model number - ready to fit. Typical models are WF550P WF560G .... Hotpoint Arcadia PCB Modules. SKU: 256. Hotpoint Arcadia PCB ...

modules and PCB's for washing machines and washers for Candy ...

www.unifit.co.uk/washing-machine-washer-spares-parts-replacement-mo...
Hotpoint SCR, WMA, WMS washing machine pcb control board ... 1200RPM 6 KG 2003 TO CURRENT LINEN), HOTPOINT - WMA58N (AQUARIUS 1400 RPM 6 ...
  1. Hotpoint Appliance Parts‎

    Adwww.hotpoint.co.uk/SpareParts‎rating for hotpoint.co.uk
    Save £5 When You Spend £35 or More! Low Cost and Next Day Delivery.
    Price Match Guarantee · Spend £35 & Save £5
  2. Hotpoint Spares - Delivered Within 24-48 Hours.‎

    Adwww.hotpoint-spares.co.uk/Shop/Spares‎Machine Spares
  3. Dishwasher Parts
  4. Cooker Spares
  5. Fridge Spares
  6. Hob Spares
  7. Replacement Circuit Board - Fried the hard drive circuit board?‎

    Adwww.onepcbsolution.com/‎hotpoint washing machine circuit board
    hotpoint washing machine control board
    washing machine pcb repairs
    hotpoint washing machine pcb problem
    washing machine circuit board replacement
    hotpoint pcb repair
    hotpoint aquarius washing machine circuit board
    circuit board for hotpoint aquarius
1 2 3 4 5 6 7 8 9 10 Next



Nov 22, 2016 | Hotpoint Washing Machines

1 Answer

H0w do I clean the machine


put it on rinse add cup of bleach

Oct 06, 2014 | Hotpoint Washing Machines

1 Answer

I have a Hotpoint WMD 960 Ultima. When I remove the washing after a cycle, the clothes are covered in dirty marks. can you tell me if this is something you can advise me about?


Look within the drum and observe if there is any dirt on it. Also check the quality of water. Check if there is any dirt /grease from the drum bearings due to failure of the bearings/seals.
Finally have the machine cleaned using good detergent cleaner , please check the link below for some tips:

http://www.espares.co.uk/parts/cleaning-products/dishwasher-cleaning/p/1423

Jul 09, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint WD63 not spinning correctly


Two things to check.
Remove rear cover.
Remove large black hose onto drum
Remove and clean filter inside hose.

Next--remove top cover and check the brushes in the motor, if they are less than 3 or 4 mm long, then replace them.
Please rate my solution.
Thanks.

Nov 24, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

I am trying to fit a new drum belt on a hotpoint aquarius vtdoo reverse action


You need to remove the top cover, remove the right hand side panel,ease the drum forward and fit the new belt.
It is very difficult to fit the new belt without the proper tool avialable from Hotpoint.
It can be done without the tool, but be prepared to stuggle

Dec 04, 2008 | Hotpoint Aquarius WMA52 Front Load Washer

1 Answer

Does not spin and rinse properly


Sounds like motor is not coming up to spin speed. May be overheating, in which case you would need a new motor.

Feb 16, 2008 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Not Filling with water


Suggest you have a look at where your drain hose is going. The highest point in the hose needs to be higher than the "minimum drainage hose height" line marked on the back of the machine. Washing machines don't have valves to keep the water in - they simply rely on the pump pushing water over the hump in the hose when you want to empty them, and the water not being able to climb the hill on its own the rest of the time. A.

Apr 17, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WMA42 Front Load Washer Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...