Question about Logitech QuickCam Communicate STX Personal Web Camera

2 Answers

I want to remove 'Logitech w/ Vid' & re-install my orig software.

I installed the updated software for my Logitech Communicate STX,
which was 'Logitech Webcam Software with Vid,' version 1.1 for XP.
Since then, my quickcam software that lets me adjust the settings of the picture (brightness/contrast, etc.) won't work--it doesn't even recognize that a camera is installed, yet it allows me to take photos with QuickCapture, which is the only part of the former version that still works.

I have tried to uninstall the new version, and I can't, even in Safe Mode.
It starts to uninstall under Add/Remove Programs, but never completes
the process. I've also tried installing the original software but it won't let
me because it says a more current version is installed. How do I get rid of the new version and re-install my old without having to re-install my
OS? HELP!

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Logitech Master
  • 2,130 Answers

1st You download Webcam Driver.
'Logitech came install
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on Sep 20, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 202 Answers

Have you tried using CCleaner to completely remove the new version? It is a free download and it always works for me. Give it a try.

Posted on May 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't have an installer for my logitech quickcam communicate stx


Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.<br />Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"<br /><br />http://www.logitech.com/index.cfm/405/&amp;cl=us,en?prodcrid=405 <br /><br />In addition to the Logitech installer you will need to run the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11<br />To start the DirectX Diagnostic Tool, click Start, click Run, type dxdiag in the Open box, and then click OK.<br /><br />Procedure to re-install Logitech software <br />Close all programs while uninstalling - downloading and uploading software <br />Disconnect your webcam <br />Uninstall the current webcam software on your computer <br />Restart computer <br />Download the Installation package from Logitech <br />Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.<br />Connect your webcam when prompted.<br />

Aug 25, 2010 | Logitech QuickCam Communicate STX Personal...

4 Answers

Driver download


Hello Sure ,

Check The Link Below :
To Check Your system <Xp , Vista , Seven >
And Download Full Driver .

Logitech QuickCam Communicate STX Personal Web Camera
moz-screenshot.pngmoz-screenshot-1.pngmoz-screenshot-2.png

Aug 03, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

I want to del all traces of Logitech Communicate STX's update


Remove your webcam
Close all other programs
Download Revo - double click on Logitech when it displays all the software loaded on your computer - Use the 'Advanced' mode - Revo will make a Restore Point and then uninstall the Logi software using the Logi uninstall software.
It will then scan your C drive and Registry for all fragments and files that failed to uninstall.
Delete everything it finds
http://www.revouninstaller.com/revo_uninstaller_free_download.html

Download 'ccleaner' and run it through a couple of times,using the factory settings and the 'Run Cleaner' control until 0 bytes have been seen to be cleaned following a scan
Run the 'Registry' from the left hand toolbar but 'Save' any changes before repairing

http://www.filehippo.com/download_ccleaner/

Re-start your computer


Jun 10, 2010 | Logitech QuickCam Communicate STX Webcam

1 Answer

I want to remove 'Logitech w/ Vid' & re-install the orig software


There are 2 options you can use.

1. Try the commercial unistallers like Final Uninstaller, Perfect Uninstaller, total unstallers etc....

2. You can use the "Restore" option utility in XP

May 25, 2010 | Logitech QuickCam Communicate STX Personal...

1 Answer

I have lost my soft ware to my creative cam how can


hello, software for this webcam is:
  • Title: Logitech Webcam Software with Vid
  • Software Version: 1.1
  • Post Date: 10-27-2009
  • Platform: Windows XP
  • File Size: 50 Mb
  • it can be downloaded here:
    http://www.logitech.com/index.cfm/435/352&hub=1&cl=us,en?osid=1

    hope it helps, good luck

    Amar Sondhi

    Dec 03, 2009 | Logitech QuickCam Communicate STX Personal...

    3 Answers

    I want a free software for install in my pc webcam logitech quickcam comunicate stx


    Go to cnet.com or the logitech website. If all else fails, type that same question in google . .magic happens with google :)

    Sep 25, 2009 | Logitech QuickCam Communicate STX Personal...

    2 Answers

    Logitech QuickCam STX vista compatibility?


    when you were installing the software did a taskbar pop up appear and tell you that hardware was found, and then proceeded to install the cam and inform you that the Logitech STX is now installed and ready for use? If not then the cam may need to be tried in another usb port as of yet it has not been recognised by windows. Also if this is being used on a laptop, sometimes there is not enough power amps being sent be the usb port to recognise, again trying a different port may solve that. If all else fails re install the software again, but make sure windows is allowing the cam to work, as sometimes there is an updater programme that works in conjunction with the cam to update drivers etc, this will probably be being dissalowed by either windows or your internet security programme and any part of the software that is being blocked may be stopping your cam also.

    Jun 11, 2007 | Logitech QuickCam Communicate STX Personal...

    1 Answer

    Logitech QuickCam STX vista compatibility?


    Have you updated DirectX?, I'm not sure if Vista has DX9.0 or 9.0c, but you could try and update DirectX before you install the cam software. Also if the cam is usb, did you install the software "before" connecting the cam?, some people aren't aware that usb devices have to have the software installed first, before connecting the device.

    Jun 11, 2007 | Logitech QuickCam Communicate STX Personal...

    Not finding what you are looking for?
    Logitech QuickCam Communicate STX Personal Web Camera Logo

    183 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Logitech Computers & Internet Experts

    micky dee

    Level 3 Expert

    2727 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18392 Answers

    mukhtar21 shaikh
    mukhtar21 shaikh

    Level 3 Expert

    2017 Answers

    Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...