Question about Speakers & Subwoofers

2 Answers

DRIVER FOR SBS 2.1 370 SERIES

I HAVE A SBS 2.1 370 SERIES CREATIVE SPEAKERS. THE SPEAKERS DONT WORK AND I PRESUME I NEED TO DOWNLOAD THE DRIVER AGAIN BUT HAVENT BEEN ABLOE TO FIND THE DRIVER

Posted by on

  • 4 more comments 
  • Anonymous Jul 04, 2008

    creative sbs 2.1 370

  • prajo Sep 19, 2008

    Same here. Ran a virus scan and I guess lost some programs. Everything else but my 2.1 creative 370 speakers are not functioning. Still try to reinstall. But ???

  • Anonymous Nov 02, 2008

    sbs 2.1 370

  • Anonymous Apr 01, 2009

    need
    DRIVER FOR SBS 2.1 370 SERIES
    thanks

  • harri boy May 11, 2009

    i accidentally deleted my driver and now my speakers do not work. if you get anything mail me at caylon.harris@gmail.com

  • josephine_li May 17, 2009

    lost cd, no driver, speaker is uninstalled!!! help



×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There are no driver for Creative SBS 2.1 370. It is just that you reinstall your sound card software as it is not being detected.

Posted on May 31, 2009

The solution would be to be an idiot and try to blow it up. i have the same problem and i would like to find a cure before i am forced to kill myself. thanks

Posted on Jul 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an AR s112ps subwoofer. I woofer is blown and i would like to find a replacement woofer. I havent had any luck looking on the net so far. any ideas?


all you need is an 8 ohm subwoofer or a Dual Voice Coil (DVC) 4 ohm subwoofer wired in series that can handle 120 Watts rms. I Went with a Rockford Fosgate Punch P1 P1S812 12-Inch 150-Watt Subwoofer - 8 Ohm

it was only $35 from amazon and is probably nicer quality than the original driver. Good Luck

Dec 24, 2010 | Speakers & Subwoofers

1 Answer

Connect creative 4.1 speakers with laptop at time 2 speaker work


i assume ur mother board supports surround sound an ur using windows os. go to control panel - sounds and audio devices - speaker settings-advanced - speaker set up with the drop down menu. select surround sound - apply - ok.
if ur using surround audio drivers like realtek, etc. the settings console should have somewhat similar options like audio input/output (I/O) options. select surround sound speaker setting and configure which audio port should be audio output ports. driver settings can be accessed from control panel too. to access control panel click on start menu there u'll see the control panel menu.

Mar 13, 2010 | Creative Labs Speakers & Subwoofers

1 Answer

How do i use my ipod to play through my 12 year old Bose Acoustimass series 5 system


You don't connect an Ipod directly to any unpowered speakers since they need an amplifier between them and your source. Presumably, your speakers already have an amp source? Then what you need to know is how to connect the Ipod to the amp. Without specifics, I can only offer general advice. Get an adapter for the Ipod headphone it to make it compatible with either an RCA input or a headphone jack.

Nov 27, 2009 | Bose Acoustimass 15 System

1 Answer

Need to download new sound driver for computer speakers


Philips.Drivers-Updated.net

Driver-Pro.com/Audio

Audio.WindowDriver.com

Philips.Drivers-Fix.net


Sep 28, 2009 | Philips 2.1 Multimedia Speaker System -...

1 Answer

Creative SBS A 500's woofer, rear right is not giving sound.


A weak conection inside speaker or other conections.

Aug 20, 2009 | Speakers & Subwoofers

1 Answer

Altec Lansing VS4121 no sound


you may want to try to rollback the driver, right click My Computer, left click properties, click hardware, then Device Manager,then sound video and game controllers, double click on the sound card and rollback if available, the speakers may also just simply be bad, If there is a seperate power source for the speakers,(an AC Adapter) then it may not be working correctly even if the power lights come on. The easiest way to determine if its the speakers, try them in a friends laptop or Desktop, on laptop, plug speakers into the headphone jack for sound output. if they work on another PC, then you have a driver issue, OR more than likely a Windows issue, in which case a Restore may be neccesary to fix, refer to the manufacturers instructions to restore your machine. Microsoftrecomends that you reinstall Windows XP at least every 12 months ( to me if it's not broke, don't fix it) in other words if you have no problems or need for a restore, don't do one because it has been over 12 mths. It sounds like you have done a good job at Troubleshooting, but to confirm the culprit try on another PC,(with your Headphones working, but your speakers wont, it sounds like your speakers have malfunctioned. I hope this helps, if so please give a fixya rating, or if it points you in the right direction, just please give appropriate rating. Thanks for the question

May 27, 2009 | Altec Lansing VS4121 Speaker

1 Answer

IN MY SYSTEM UNFORTUNATELY UNINSTALLED THE DRIVER SOFTWARE BUT I HAVE THE CD ROM. AFTER I PUT THE CD ROM AND EXECUTE, DURING THE PROCESS AFTER REACH THE INSTALLATION AT 34% BUT AUTOMATICALLY DISABLE THE...


You can try this:
I am assuming you have a PC based sound system.

1. Remove your Creative Labs Home Theater from your PC. You should remove all hardware.
2. If you have Windows, go to "Control Panel"
3. Select "Add or Remove Programs"
4. Delete all Software releted to your Creative Labs System
5. Go to http://www.creative.com/language.asp?sDestUrl=/support/downloads
6. Download the appropriate driver for your system
7. Reinstall the system with the new driver

You could try your CD ROM after completely deleting the software from your PC, but I think I'd just try the downloaded version. The important thing is to completely remove all hardware and software before reinstalling.

Apr 08, 2009 | Creative Labs Speakers & Subwoofers

1 Answer

Bose 901 repair...


Bose 901s series 1-6 are all wired in the same way. that is nine one ohm full range drivers wired in series to produce around 8 or 9 ohms. No way it can be a short, think of the old christmas lights that were wired in series , one light went out, they all went out. I would check the wiring first to make sure no loose connections exist. The only way to access the wiring is to remove each driver from the cabinet. If all wires are intact, You may have a damaged driver. A simple test with a ohm meter will tell you. set to lowest ohm setting, each driver should read 1 ohm. If your speakers dont have the air tubes in back, you have series1 or 2 removing the drivers will not affect the vaccum, just replace the gasket material around the drivers.

Nov 08, 2008 | Bose 901 VI Main / Stereo Speaker

2 Answers

SOUND CARD CREATIVE ES 1373


Go to nec.com, next to their support and download section. you are looking for the audio driver for the Powermate VT300i series,

Here are the links for the downloads.

Win 98 is ftp://ftp.necam.com/pub/Catalog/3337/vt_ess_9x.exe

Win NT is ftp://ftp.necam.com/pub/Catalog/3338/vt_ess_nt.exe

Being such an old card, it isn't supported by XP or even Windows 2000, and for sure not Vista, so the above is all that is out there...

john



Aug 15, 2008 | Speakers & Subwoofers

Not finding what you are looking for?
Speakers & Subwoofers Logo

Related Topics:

2,888 people viewed this question

Ask a Question

Usually answered in minutes!

Top Speakers & Subwoofers Experts

 Grubhead
Grubhead

Level 3 Expert

4584 Answers

Michael Edwards
Michael Edwards

Level 1 Expert

53 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...