I turned off the set.It was off for about4 hours.I simply turned (using hand controls) the set back on. Up came the picture. It can't be fixed.I shall keep records to try to build up a picture of what is happening.I think I'am in for a crappy few months. Neil Brazel
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are the speakers' cables connected correctly? (p. 37) Is "Sound Mute" active? (p. 13) Is the volume set to the minimum? Is "Speaker output" set to "Off"? (p. 22) Change "SAP" settings. (p. 16) Check "HDMI 1 in", "HDMI 2 in" or "HDMI 3 in" settings. (p. 22)
Hope this helps, page# refer to your manual.
Ur tv still able to see picture photo on ur tv video functions,tv should be still able to work.Tries tv and cable or satalite boxes unplug,replug it back like about an hour later.For the tv to do a resetting itself back to the factory setting and those pay boxes to reboot and upgraded it softwares.U have the tv original remote?Yes?Push the tv menu button if ur tv have a video menu than it is a very good new.Tries tv resetting every modes on the tv Menu back to factory setting.Tv should funsctions again.After tries to resetting the tv and rebooting those pay signal boxes,if tv still getting no tv video signal.Than those tv backlight buffer boards for the Plasma screen X or Z are dead could be either X or Z or both.Find the closed it is authorize LCD and Plasma tvs shops for repair.Best because they have the equipments to determine the exact buffer board is or are dead.
The display screen is the most expensive part to replace in your plasma tv. In most cases its cheaper to buy the same model. Instead of buying the part and paying a repair man to fix it....Broken screen = junked plasma
Most likely what happened is one of the capacitors went bad. When a capacitors goes bad it produces a popping sound. This could be an easy and cheap fix if you find the bad capacitor or capacitors. The bad capacitor will have a bulging top most likely on the power board but could be anywhere.