Question about Brother MFC 210C All-In-One InkJet Printer

1 Answer

Im going nuts

Thank you I have done that and still no joy there is no erorr the lcd just says please wait. is there anything else you can think of please Im going nuts.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers

Sorry. seeme that the scanner or printer main board is defective.

last chance: press menu then start bk copy then fourtimes arrow up quite quickly after another. machine should be in maintenance mode. if you see an error code post here. If not press start bk. an error code should come up.

Posted on Apr 07, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Minolta bizhab di 3510 please wait problem

mam/sir Have you had the developer and drum replaced or does the screen say Replace PC Drum? There are certain house chores the copier does before "Ready to Copy" it is waiting for them to get done equals "Please Wait". One big item is making sure the developer and toner are properly mixed inside the image unit underneath the drum. Might want to have the developer replaced and drum/cleaning blade normally done all together, then run the F8 procedure and make sure the counters where cleared Did you recently replace the drum and the developer if so did you clear the counters for the drum and developer. IF not then the copier thinks the new drum and new developer are old. Copier works on the counters that how it know it got a new drum and developer. Get new develop and new drum and have it installed correctly, Counters are clear before the unit is yanked out of the machine, then you remove the image unit/drum unit replace the developer/drum and cleaning blade. (DO NOT USE AVACUUM CLEANER WHEN REPLACING THE DEVELOPER static electricity can destroy the sensor located below the developer unit. Then reinstall and RUN F8. Make sure the fax line and Ethernet cable is removed can't print anything until the F8 is run. Or you start over with new developer and new drum

Jul 10, 2012 | Minolta Office Equipment & Supplies

2 Answers

I found in canon ir 2018 erorr E 007 what this mean and what the solution ?

it is mean the fixing film was broken/torn.
you must replace a new.
be careful when you replace it.

May 17, 2011 | Canon iR 2016i Black and White Copier

1 Answer

Printer Docuprint 340A erorr "please

docuprint 340a please reboot printer (010-349)

Mar 03, 2011 | Fuji DOCUPRINT 340A Laser Printer

5 Answers

INK SYSTEM FAILURE Ink system has failed. Unable to copy, receive faxes or print. Refer to printer documentation. error: 0xc19a0013 Press OK This is the error in which I am receiving and I need to...

Try the following reset:

Hold the OK and the Help button at the same time. While holding them down, plug the power in. Continue to hold both buttons until the unit shut off.
After shutting down, release both buttons and power on the printer.

Alternatively follow instructions on this document from HP.

May 07, 2008 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

ALL functions running in super slow motion

Have you tried doing a total uninstall of the HP software, then going to the HP website and downloading and installing the PRINTER DRIVER ONLY, instead of the full software bundle.

Mar 19, 2008 | HP PSC 2110 All-In-One InkJet Printer

2 Answers


the power needs to be reset, so do it and try it again, just take out the usb, the power from the wall outlet and the usb in the printer itself.

Be sure to cancel the print job FIRST, completely unplug the bastard, replug it, turn on, wait a bit for the start cycle then print it again.

I get this error myself sometimes. The above always works for me.

Jan 13, 2008 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Proplem in aficio 450

322 C 1st laser synchronization error
• The 1st laser synchronization signal
cannot be detected by the main scan
synchronization detector board even
if the laser diodes are activated.
• Poor cable connection between the
laser synchronization detector board
and the LD unit.
• Laser synchronization detector board
out of position and angle of reflection
not correct
• Laser synchronization detector board
• LD unit defective

Above is a detailed description of your problem if the copier has had a knock there maybe a mirror out of position. remove the laser unit and open. check that the mirrors are in there correct places.

Once you have done this enter service mode by pressing the yellow clear all button type using the numeric keys 1 0 7 the hold the pink stop button down unit the screen changes. press the Copy SP mode button on the screen then turn the machine off using the switch on the left hand side wait about 5 - 10 seconds and switch on then try the copier. If the problem comes up again you will most likely have to replace the LSU (Laser Scanner Unit)


Hope this is some help please rate me

Dec 16, 2007 | Ricoh Aficio 450 Copier

1 Answer

Frozez LCD Screen

hi im jules_09,theres a problem with the copier because ussually after turning it on it warms up for seconds or a minute,but when it freeze at wait the warm up time is too long,see if if you can get the error code,if there is a error code it the lcd check how long is its warm up time.if it take too long.if you can repair it check the voltage at the power supply board going to the main logic board.

Nov 05, 2007 | Canon imageRUNNER 8500 Copier

Not finding what you are looking for?
Brother MFC 210C All-In-One InkJet Printer Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts


Level 3 Expert

1362 Answers


Level 3 Expert

1113 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides